TP-Link TL-R4299G User Guide
TP-Link TL-R4299G Manual
 |
UPC - 845973040260
View all TP-Link TL-R4299G manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-R4299G manual content summary:
- TP-Link TL-R4299G | User Guide - Page 1
TL-R4299G Dual-WAN SMB Broadband Router Rev: 1.0.3 1910010055 - TP-Link TL-R4299G | User Guide - Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced - TP-Link TL-R4299G | User Guide - Page 3
This equipment has been tested and found to if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more - TP-Link TL-R4299G | User Guide - Page 4
contents should be found in your box: ¾ One TL-R4299G Dual-WAN SMB Broadband Router ¾ One power cord for TL-R4299G Dual-WAN SMB Broadband Router ¾ One Resource CD for TL-R4299G Dual-WAN SMB Broadband Router, including: • This Guide • Other Helpful Information ¾ Mounting kits for installing in - TP-Link TL-R4299G | User Guide - Page 5
Guide 5 3.1 Configure PC ...5 3.2 Login ...8 Chapter 4. Configuring the Router 11 4.1 Status...11 4.2 Quick Setup ...13 4.3 Network...13 4.3.1 LAN...13 4.3.2 WAN ...14 4.3.3 Network service detection 25 4.3.4 MAC Clone ...26 4.3.5 Flow Balance...26 4.3.6 Balance Policy...28 4.3.7 WAN Port - TP-Link TL-R4299G | User Guide - Page 6
4.12.6 Port VLAN ...64 4.13 System Tools ...64 4.13.1 Time Settings ...65 4.13.2 Firmware...66 4.13.3 Factory Defaults ...66 4.13.4 Backup and Restore...67 4.13.5 Reboot ...68 4.13.6 Password...69 4.13.7 System Log ...70 4.13.8 Remote Management...70 4.13.9 Statistics ...71 4.13.10 WAN Speed Detect - TP-Link TL-R4299G | User Guide - Page 7
network. TL-R4299G Dual-WAN SMB Broadband Router provides two WAN ports, with plugging two wan lines, the export bandwidth of it could be multi-time-increased, enjoying various service from different ISPs. The router features fully automatically load balance policy, no need for any manually work - TP-Link TL-R4299G | User Guide - Page 8
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through ¾ Supports Traffic Statistics ¾ Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter ¾ Ignores Ping packets from WAN or LAN ports ¾ Supports firmware upgrade ¾ Supports Remote and Web - TP-Link TL-R4299G | User Guide - Page 9
TL-R4299G Dual-WAN SMB Broadband Router User Guide The front panel contains the following features. (Viewed from left to right) ¾ Reset: Use the button to restore the router to the factory defaults. There are two ways to reset the router: Method one: Use the Factory Defaults function on System Tools - TP-Link TL-R4299G | User Guide - Page 10
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Operating Humidity: 10%~90%RH, Non-condensing ) Note: Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid - TP-Link TL-R4299G | User Guide - Page 11
TL-R4299G Dual-WAN SMB Broadband Router User Guide Chapter 3. Quick Installation Guide After connecting the TL-R4299G router into your network, you should configure it. This chapter describes how to configure the basic functions of your TL-R4299G Dual-WAN SMB Broadband Router. These procedures only - TP-Link TL-R4299G | User Guide - Page 12
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 3-2 Step 3: In the next screen, select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3 6 - TP-Link TL-R4299G | User Guide - Page 13
TL-R4299G Dual-WAN SMB Broadband Router User Guide Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK. Figure 3-4 ) Note: You can configure the PC to get an IP address manually, select "Obtain an IP address automatically" and "Obtain DNS server address automatically" in - TP-Link TL-R4299G | User Guide - Page 14
TL-R4299G Dual-WAN SMB Broadband Router User Guide If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router. You can check it follow the steps below: ) Note: Figure 3-6 Is the connection between your PC and the Router correct? The LEDs of - TP-Link TL-R4299G | User Guide - Page 15
TL-R4299G Dual-WAN SMB Broadband Router User Guide ) Note: Figure 3-7 If the above screen (Figure 3-7) does not prompt, it means that your web-browser may be set to a proxy. Choose Tools menu→Internet - TP-Link TL-R4299G | User Guide - Page 16
TL-R4299G Dual-WAN SMB Broadband Router User Guide ) Note: The router supports three popular ways to connect to Internet. Please select one compatible with your ISP, if you are given another way not listed here, refer to Network→ WAN for detailed list. Step 3: If you choose PPPoE, you will see the - TP-Link TL-R4299G | User Guide - Page 17
TL-R4299G Dual-WAN SMB Broadband Router User Guide Chapter 4. Configuring the Router This User Guide recommends using the "Quick Installation Guide" for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, you need to read - TP-Link TL-R4299G | User Guide - Page 18
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-1 ¾ LAN - This field displays the current information for the LAN, including the "MAC address", "IP address" and "Subnet Mask". ¾ WAN 1~2 - This field displays the parameters applied to the WAN ports of the router, including "MAC address", - TP-Link TL-R4299G | User Guide - Page 19
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.2 Quick Setup Please refer to chapter 3"Quick Installation Guide". 4.3 Network Choose menu "Network", the next submenus are shown below: Figure 4-2 Click any of them, and you will be able to configure the corresponding function. The detailed - TP-Link TL-R4299G | User Guide - Page 20
TL-R4299G Dual-WAN SMB Broadband Router User Guide DHCP sever will not take effect, until they are re-configured. Besides this, the Virtual Server and DMZ Host may change accordingly at the same time, you'd better re-configure it as well. 4.3.2 WAN Choose menu "Network→WAN", you can configure the IP - TP-Link TL-R4299G | User Guide - Page 21
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-4 ¾ interior network: When the WAN is connecting with a LAN, you can select the option, and enter the LAN IP addresses in the field, then the WAN port will ¾ Get IP with Unicast DHCP: A few ISPs' DHCP servers do not support the broadcast 15 - TP-Link TL-R4299G | User Guide - Page 22
TL-R4299G Dual-WAN SMB Broadband Router User Guide applications. If you can not get the IP address the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. ¾ Default Gateway - Enter the gateway IP address in dotted-decimal notation provided by your ISP (Optional). - TP-Link TL-R4299G | User Guide - Page 23
TL-R4299G Dual-WAN SMB Broadband Router User Guide (Optional). ¾ Secondary DNS - Type another DNS address in dotted- 4-6 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect - TP-Link TL-R4299G | User Guide - Page 24
TL-R4299G Dual-WAN SMB Broadband Router User Guide Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router have the Internet connecting last unless a new link is requested. 2) Sometimes the connection cannot - TP-Link TL-R4299G | User Guide - Page 25
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-7 ¾ MTU Size- The default MTU size is 1492 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP. ¾ Service Name/AC Name - The service name and AC ( - TP-Link TL-R4299G | User Guide - Page 26
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4. BigPondCable If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable option. Figure 4-8 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ - TP-Link TL-R4299G | User Guide - Page 27
TL-R4299G Dual-WAN SMB Broadband Router User Guide after a specified period of the Internet connectivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to - TP-Link TL-R4299G | User Guide - Page 28
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-9 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the - TP-Link TL-R4299G | User Guide - Page 29
TL-R4299G Dual-WAN SMB Broadband Router User Guide enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You - TP-Link TL-R4299G | User Guide - Page 30
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-10 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the - TP-Link TL-R4299G | User Guide - Page 31
TL-R4299G Dual-WAN SMB Broadband Router User Guide enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You - TP-Link TL-R4299G | User Guide - Page 32
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Destination IP Address for Ping - Enter the correct IP address that really existed on the WAN network. For example: 202.96.134.188. ¾ By DNS Query - Detect whether Internet connection is online or not by sending query packet to DNS Server. ¾ - TP-Link TL-R4299G | User Guide - Page 33
TL-R4299G Dual-WAN SMB Broadband Router User Guide ISPs. For example, you can specify some packets prior forwarding from WAN port 1, which depend on specified source or destination IP addresses. Figure 4-13 ¾ Enable/Disable WAN - Enable the WAN port you want to use, then click Save to make it - TP-Link TL-R4299G | User Guide - Page 34
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-14 Click Save. To add additional rules, repeat steps 1-3. Other configurations for the 4.3.6 Balance Policy Choose menu "Network→Flow Balance", you can configure the balance policy in the next screen. This screen configure the WAN's foward - TP-Link TL-R4299G | User Guide - Page 35
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-15 ¾ On Fastest-Session - If you select the option, the data will be transmited through one of the WAN ports which connect the WAN much quicker than the other. • Faster age for Speed-Detect-Table - Faster timeouts for the entries in Speed- - TP-Link TL-R4299G | User Guide - Page 36
TL-R4299G Dual-WAN SMB Broadband Router User Guide • Age for IP-Pairs-Table - Normal timeouts for the entries in Paired-IP-first Table. During the time, if an entry has never been used, - TP-Link TL-R4299G | User Guide - Page 37
TL-R4299G Dual-WAN SMB Broadband Router User Guide Enabled. ¾ Flow Control - This displays whether the Flow configure the DHCP in the next screen (shown in Figure 4-18). The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration - TP-Link TL-R4299G | User Guide - Page 38
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-18 ¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer. ¾ Start IP Address - This field specifies the first - TP-Link TL-R4299G | User Guide - Page 39
the information. TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-19 ¾ Client Name - This field displays the name of the DHCP client ¾ MAC Address - This field displays the MAC address of the DHCP client ¾ Assigned IP - This field displays the IP address that the router has allocated - TP-Link TL-R4299G | User Guide - Page 40
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-21. Step 2: Enter the MAC address, IP address Forwarding Choose menu "Forwarding", you can see the submenus under the main menu: Virtual Servers, Port Triggering, DMZ and UPnP. Figure 4-22 Click any of them, and you will be able to configure - TP-Link TL-R4299G | User Guide - Page 41
TL-R4299G Dual-WAN SMB Broadband Router User Guide Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests from Internet to this service port will be redirected to the computer specified by - TP-Link TL-R4299G | User Guide - Page 42
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-24 Step 3: After that, select Enable to make the entry take effect. Step 4: Click Save button to save the configuration server. 4.5.2 Port Triggering Choose menu "Forwarding→Port Triggering", you can view and add port triggerings in the - TP-Link TL-R4299G | User Guide - Page 43
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-25 ¾ Trigger Port - This displays the port for outgoing traffic. An outgoing connection using this port will "Trigger" this rule. ¾ Trigger Protocol - This displays the protocol used for Trigger Ports, either TCP,UDP, or All (all protocols - TP-Link TL-R4299G | User Guide - Page 44
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-26 Step 3: After that, select Enabled to make the entry take effect. Step 4: Click Save button to save the configuration. ) Note: 1) If you want to add more than one reserved IP, please go to step 1 to continue. 2) When the trigger - TP-Link TL-R4299G | User Guide - Page 45
TL-R4299G Dual-WAN SMB Broadband Router User Guide effect. 4.5.4 UPnP Choose menu "Forwarding→UPnP", you can view the default. ¾ App Description - This displays the description provided by the application in the UPnP request. ¾ External Port - This displays the external port, which the router - TP-Link TL-R4299G | User Guide - Page 46
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Protocol - This displays the protocol for the application. ¾ Internal Port - This displays the Internal port, which the router opened for local host. ¾ IP Address - The UPnP device that is currently accessing the router. ¾ Status - This displays - TP-Link TL-R4299G | User Guide - Page 47
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-30 ¾ Enable Firewall - Enable the general firewall switch or not. ¾ Enable IP Address Filtering - Enable the IP Address Filtering or not. There are two default filtering rules, please select the rule for your need. ¾ Enable Domain Filtering - TP-Link TL-R4299G | User Guide - Page 48
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-31 ¾ Effective Time - This is the time or the range of time for the entry to take effect. For example, 1800 - 2200, it means - TP-Link TL-R4299G | User Guide - Page 49
TL-R4299G Dual-WAN SMB Broadband Router User Guide Step 2: Click Add New.../Modify shown in Figure 4-31, you will see a new screen shown in Figure 4-32. Step 3: Enter the "Effective time" that the rule will take effect as shown in Figure 4-32. Step 4: Enter the "LAN IP Address", "LAN Port", "WAN IP - TP-Link TL-R4299G | User Guide - Page 50
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.6.3 Domain Filtering Choose menu "Security→Domain Filtering", you can configure the end of .net on the Internet, while no limit for other websites, you can configure as follows. Step 1: Enable the "Firewall" and "Domain Filtering" on the Firewall - TP-Link TL-R4299G | User Guide - Page 51
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-35 Step 5: Finally, click Save to make the rule take effect. Step 6: Go to Step 2 to complete the other rules continually. After you finish the configurations, you will see the rules in the table below: Figure 4-36 ) Note: Before adding an - TP-Link TL-R4299G | User Guide - Page 52
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-37 ¾ MAC Address - .This is the the Internet, you can configure as follows. Step 1: Enable the "Firewall" and "MAC Address Filtering" on the Firewall screen (show in Figure 4-30). And then specify the Default MAC Address Filtering Rule " - TP-Link TL-R4299G | User Guide - Page 53
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-38 Step 4: Finally, click Save to make the rule take effect. Step 5: Go to Step 2 to complete the other rules continually. After you finish the configurations, you will see the rules in the table below: Figure 4-39 ) Note: Before adding a - TP-Link TL-R4299G | User Guide - Page 54
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-40 ¾ Region - This option used to select the specifically area from which the packets will be addresses), then the source IP address will be deemed to make IP Attacks. And the Router will start up the blocking function immediately. 48 - TP-Link TL-R4299G | User Guide - Page 55
TL-R4299G Dual-WAN SMB Broadband Router User Guide • Port Scan - During the specific time, if a computer (identified by a particular source IP address) transmits TCP SYN packets to another computer's (identified by a destination IP address) ten different ports, then the source IP address will be - TP-Link TL-R4299G | User Guide - Page 56
TL-R4299G Dual-WAN SMB Broadband Router User Guide ACK is considered as abnormal. And the Router will start up the blocking right. In the event, the Router will start up the blocking function immediately. 4.7 Static Routing Choose menu "Static Routing", you can configure the static route in the next - TP-Link TL-R4299G | User Guide - Page 57
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Default Gateway - This is the IP address of the gateway device that allows for contact between the router and Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default Gateway, and then select the status. Figure 4-42 Step 3: - TP-Link TL-R4299G | User Guide - Page 58
TL-R4299G Dual-WAN SMB Broadband Router User Guide Click the Delete button to delete the entry. under the main menu: Figure 4-43 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.8.1 Session Limit Choose - TP-Link TL-R4299G | User Guide - Page 59
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-45. Step 2: Enter the appropriate LAN IP Address, Max Session and then select : Figure 4-47 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 53 - TP-Link TL-R4299G | User Guide - Page 60
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.9.1 QoS Settings Choose menu "QoS→QoS Settings", you can configure the Upload Bandwidth and Download Bandwidth in the next screen, their value you configure should be less than 1000000Kbps. Figure 4-48 4.9.2 QoS Rules List Choose menu "QoS→QoS - TP-Link TL-R4299G | User Guide - Page 61
TL-R4299G Dual-WAN SMB Broadband Router User Guide Step 3: Click the Save button. Figure 4-50 4.10 IP & MAC Binding Choose menu "IP & MAC Binding", you can see the submenus under the main menu: Binding Setting, ARP List. Figure 4-51 Click any of them, and you will be able to configure the - TP-Link TL-R4299G | User Guide - Page 62
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-52 ¾ MAC Address - This field displays the Figure 4-53 Step 3: Select Bind the MAC and IP address, then click Save button to save the configuration. To find a specific IP & MAC binding entry: Step 1: Click Find shown in Figure 4-52, you - TP-Link TL-R4299G | User Guide - Page 63
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-54 Step 3: Click Find button, then you will see the entry with the specific MAC address or IP address. Step 4: Click Back to return - TP-Link TL-R4299G | User Guide - Page 64
TL-R4299G Dual-WAN SMB Broadband Router User Guide Click Load to load the specific item to the IP & MAC Binding list (shown in Figure 4-52). Click Delete to load the specific item to the IP & MAC Binding list. Click the Bind All button to bind all the current items, available after enable. Click the - TP-Link TL-R4299G | User Guide - Page 65
TL-R4299G Dual-WAN SMB Broadband Router User Guide Step 1: Select the WAN port to configure. Step 2: Type the "User Name" and "Password" for your DDNS account. Step 3: Enter the domain name that your dynamic DNS service provider offers. Step 4: Enable DDNS, and click Save to save the current - TP-Link TL-R4299G | User Guide - Page 66
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-58 To set up for Comexe DDNS, follow these instructions: Step 1: Select the WAN port to configure. Step 2: Enter the domain name your dynamic DNS service provider offer. Step 3: Type the "User Name" and "Password" for your DDNS account. - TP-Link TL-R4299G | User Guide - Page 67
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-59 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.12.1 Port Statistics Choose menu "Switch Setting→Port statistics", you can view the - TP-Link TL-R4299G | User Guide - Page 68
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-61 ¾ Mirror Config - There are three Mirror modes: Disable, Output mirror, Input mirror. The Output/Input mirror is related to the Router. ¾ Port Mirror - This is the port linked to the mirror computer. ¾ Mirrored Ports List - The option - TP-Link TL-R4299G | User Guide - Page 69
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-63 4.12.5 Port Status Choose menu "Switch Setting→Port Status", you can view the status of the LAN port in the next screen (shown in Figure 4-64). Figure 4-64 63 - TP-Link TL-R4299G | User Guide - Page 70
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.12.6 Port VLAN Choose menu "Switch Setting→Port VLAN", you can view and configure the VLAN table. Figure 4-65 ¾ Port - You can select them as the members of VLAN. ¾ Enable - This used to enable the corresponding VLAN configuration. ¾ Clean - Click - TP-Link TL-R4299G | User Guide - Page 71
TL-R4299G Dual-WAN SMB Broadband Router User Guide Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.13.1 Time Settings Choose menu "System Tools→Time Settings", you can configure the time on the screen ( - TP-Link TL-R4299G | User Guide - Page 72
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.13.2 Firmware Choose menu "System Tools→Firmware", you can update the latest version of firmware for the Router on the screen (shown in Figure 4-68). Figure 4-68 ¾ Firmware Version - This displays the current firmware version. ¾ Hardware Version - - TP-Link TL-R4299G | User Guide - Page 73
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-69 Click the Restore button to reset all configuration settings to their default values. ) Note: 1) The default User Name is admin. 2) The default Password is admin. 3) The default IP Address is 192.168.1.1. 4) The default Subnet Mask is - TP-Link TL-R4299G | User Guide - Page 74
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-71 Step 2: Save the file as the appointed file (shown in Figure 4-72). Figure 4-72 To restore the Router's settings: Step 1: Click the Browse button to locate the update file for the device, or enter the exact path to the Setting file in - TP-Link TL-R4299G | User Guide - Page 75
screen. TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-73 ) Note: Some settings of the router will take effect only after rebooting, which include: 1) Change LAN IP Address. (System will reboot automatically) 2) MAC Clone (system will reboot automatically) 3) DHCP service function. 4) - TP-Link TL-R4299G | User Guide - Page 76
TL-R4299G Dual-WAN SMB Broadband Router User Guide 2) The new user name and password must not exceed 14 characters in length and must not include any spaces. Enter the new Password twice to confirm it. 3) You can click the Clean All button to clean all the configurations. 4.13.7 System Log Choose - TP-Link TL-R4299G | User Guide - Page 77
TL-R4299G Dual-WAN SMB Broadband Router User Guide entering that number in the box provided. Choose a number between 1024 and 65534, but do not use the number of any common service port. ¾ Remote Management IP Address - This is the current address you will use when accessing your router from the - TP-Link TL-R4299G | User Guide - Page 78
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Statistics Table - This table displays the statistics information about the traffic. IP Address MAC Address The IP address whose statistics information are displayed Total Packets - TP-Link TL-R4299G | User Guide - Page 79
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-78 ¾ Destination IP - the IP address which datagrams are sent to, such as- 202.96.134.188. ¾ ID - The number of ICMP datagrames to be sent. ¾ Source Port - The port where datagrams are sent to, such as- 5000 ¾ Destination Port - The - TP-Link TL-R4299G | User Guide - Page 80
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Detect Result - The interval between sending datagram and recving datagram, uint is ms. 4.13.11 IP NAT Table Choose menu "System Tools→IP NAT Table", you will see the IP NAT in the table below: Figure 4-79 ¾ Out Link - The WAN port which links - TP-Link TL-R4299G | User Guide - Page 81
TL-R4299G Dual-WAN SMB Broadband Router User Guide Appendix A: Specifications General IEEE 802.3, 802.3u , 802.3x, 802.1x Standards and Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP,HTTP,DNS Safety & Emission FCC、CE Two 10/100M Auto-Negotiation WAN RJ45 port. Ports Eight 10/100/1000M Auto- - TP-Link TL-R4299G | User Guide - Page 82
TL-R4299G Dual-WAN SMB Broadband Router User Guide Appendix B: FAQ 1. How do I configure the router to access Internet by ADSL users? Step 1: First, configure the ADSL modem in RFC1483 bridge model. Step 2: Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The telephone - TP-Link TL-R4299G | User Guide - Page 83
TL-R4299G Dual-WAN SMB Broadband Router User Guide 2. How do I configure the router to access Internet by Ethernet users? Step 1: Login to the router, click the menu Network→WAN on the left of your browser, On the WAN screen, select "Dynamic IP" for "WAN Connection Type", and finish it by clicking - TP-Link TL-R4299G | User Guide - Page 84
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure B-4 ) Note: Your opposite side should call your WAN IP, which is displayed on the "Status" page. Method two: Use DMZ Host Login to the router, click the menu Forwarding→DMZ. On the DMZ screen, select "Enable", and enter your IP address into - TP-Link TL-R4299G | User Guide - Page 85
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure B-6 ) Note: If the above configuration takes effect, you should login the Router by entrying http://192.168.1.1:88 (the router's LAN IP address: Web Management Port) in the address field of the web browser. Step 2: To add a WEB Server: Login - TP-Link TL-R4299G | User Guide - Page 86
TL-R4299G Dual-WAN SMB Broadband Router User Guide Appendix C: Glossary ¾ DDNS (Dynamic Domain Name System) - The capability of assigning a fixed host and domain name to a dynamic Internet IP address. ¾ DHCP (Dynamic Host Configuration Protocol) - A protocol that automatically configure the TCP/IP
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
 |
 |
TL-R4299G
Dual-WAN SMB Broadband Router
Rev: 1.0.3
1910010055