TP-Link TL-SC4171G User Guide
TP-Link TL-SC4171G Manual
 |
UPC - 845973054045
View all TP-Link TL-SC4171G manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-SC4171G manual content summary:
- TP-Link TL-SC4171G | User Guide - Page 1
TL-SC4171G Wireless Pan/Tilt Surveillance Camera Rev: 1.0.0 1910010423 - TP-Link TL-SC4171G | User Guide - Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced - TP-Link TL-SC4171G | User Guide - Page 3
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation approved by the party responsible for compliance could void the user's authority to operate the equipment. CE Mark Warning This is - TP-Link TL-SC4171G | User Guide - Page 4
Instruction...2 Chapter 2 Minimum System Requirement & Product Feature 3 2.1 System Requirement 3 2.2 Product Feature ...3 Chapter 3 Using IP Camera via Web Browser 7 3.1 Obtain the IP Address 7 3.2 Windows Web Browser 8 3.3 Mac Web Browser ...10 Chapter 4 Using IP Camera via - TP-Link TL-SC4171G | User Guide - Page 5
Network ...36 7.3.1 Information ...37 7.3.2 PPPoE (Point-to-Point Protocol over Ethernet 38 7.3.3 DDNS (Dynamic DNS 39 7.3.4 UPnP (Universal Plug and Play 43 7.3.5 Bonjour...44 7.3.6 IP Notification ...45 7.3.7 Wireless ...46 7.3.8 Messenger ...49 7.4 Security 16 CHANNEL IP CAMERA 79 - TP-Link TL-SC4171G | User Guide - Page 6
following items should be found in your package: ¾ TL-SC4171G Wireless Pan/Tilt Surveillance Camera ¾ Power Adapter ¾ Camera Mount Kit & Pads ¾ Ethernet Cable ¾ Quick Installation Guide ¾ Resource CD, including: z This User Guide z Application Guide z Other helpful information ) Note: Make sure that - TP-Link TL-SC4171G | User Guide - Page 7
Safety Instruction ¾ Check the laws in your local region before using this product for surveillance purposes. ¾ Don't open the housing of the product Don't try product. ¾ Transportation When transporting the camera, repack it as originally packed at the factory or in materials of equal quality. - TP-Link TL-SC4171G | User Guide - Page 8
to use this IP-Camera normally. If computer level is lower than this, it might cause some problems. Item Requirements CPU XP, Vista, Mac OS X Leopard, Linux Web Browser ) Note: Internet Explore 6 or later 1. If you are using Windows 98 or Windows ME, please install IP Installer before using - TP-Link TL-SC4171G | User Guide - Page 9
Security HTTP Event Supported protocols Bonjour, TCP/IP, DHCP users Operating conditions 0°C ~ 50℃ (32℉ ~ 122℉) HARDWARE Lens F1.8, 4.2 mm Megapixel board lens IR LEDs / Working Distance 5 φ LEDs x 12 (850nm)/10M Input / Output Alarm Output Max 30W Power 12V DC, 1A, Max 5W Wireless - TP-Link TL-SC4171G | User Guide - Page 10
2.3 Physical Overview 2.3.1 Front view Focus Adjustment Ring Built-in Microphone Power LED Ethernet LED Focus Adjustment Ring: Adjust the focus to get a clear image. Built-in Microphone: Built-in microphone for two-way audio. Power LED: Power LED will light up after completing the boot process. - TP-Link TL-SC4171G | User Guide - Page 11
powered on, then press and hold the Reset button for more than 10 seconds. Afterwards release it, and the camera will be restored to factory defaults after rebooting. Antenna Connector: For connection of IEEE 802.11b/g wireless network. Audio In: To support audio in with Microphone for two way - TP-Link TL-SC4171G | User Guide - Page 12
IP Camera via Web Browser 3.1 Obtain the IP Address 1. Insert the provided CD into your CD-ROM driver. The Setup Wizard will automatically pop up on your computer's screen as shown in the figure below. 2. Choose the Intelligent IP Installer, and then the next screen appears. Click on Intelligent IP - TP-Link TL-SC4171G | User Guide - Page 13
button to search Network Cameras in the network; it displays Network Cameras information including IP Address. 3.2 Windows Web Browser 1. Click Link to IE button or launch your web browser, and enter the IP address (obtain from the figure above) of the IP camera in the Location / Address field of - TP-Link TL-SC4171G | User Guide - Page 14
". Please go to Tool→Internet Options...→Security→Custom Level... and find Download signed ActiveX controls to prompt it. For detailed information, please refer to the Quick Installation Guide. 2) If you only want to view the video without setting page, enter "http:///index2.htm" as your web URL - TP-Link TL-SC4171G | User Guide - Page 15
3.3 Mac Web Browser 1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address field of your browser. ) Note: If you only want to view the video without setting page, enter "http:///index2.htm" as your web URL. 10 - TP-Link TL-SC4171G | User Guide - Page 16
2. Enter the default User name "admin" and password "admin" in the dialog box as shown below. ) Note: The default user name "admin" and the password are set at the factory for the administrator. You can change them in the Account Menu (Please check "Setting → Basic → Security → Account") 11 - TP-Link TL-SC4171G | User Guide - Page 17
3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, Image Setup and PT/PTZ control. For more details, you can check Section 6.2, Section 6.3, Section 6.4 and Section 6.5. 12 - TP-Link TL-SC4171G | User Guide - Page 18
into your 2.5G Web Browser. is the Public IP address of your IP camera (to obtain the IP Address, please refer to Section 3.1). 4.2 Using IP Camera via iPhone You can use TP-LINK Web User Interface via iPhone. If you want to use TP-LINK web UI via iPhone, please follow the setting process below - TP-Link TL-SC4171G | User Guide - Page 19
3. Type name and password. Default value is admin / admin. Then click Login In. 4. The TP-LINK User Interface and live image will show up in the middle of screen. ) Note: It will show continuous snapshots, not a real time video streaming. Therefore, the recording feature is disabled. 14 - TP-Link TL-SC4171G | User Guide - Page 20
Messenger function. 1. Application of a new MSN account: You can download MSN software freely and create a new MSN account (e.g. camera at [email protected]) to use Microsoft Live Messenger. 2. Login Account and Password: Go to Setting→Basic→Network→Messenger, set the Messenger to "On". Then, enter the - TP-Link TL-SC4171G | User Guide - Page 21
5. Log in Working Account: Use your working account to login in the Messenger software. And add the camera's MSN account (camera at [email protected]) as a contact. 6. Check its status. Normally it should be online. 16 - TP-Link TL-SC4171G | User Guide - Page 22
7. The Camera at home will show up with its Public IP and Private IP after sending a message of "Ping" in the lower key (if the option of IP Notification is "On"). 8. Click the camera icon and select View a contact's webcam to view the video. 17 - TP-Link TL-SC4171G | User Guide - Page 23
9. The IP Camera will accept your invitation; the live video will show up in the right screen after few seconds. 18 - TP-Link TL-SC4171G | User Guide - Page 24
10. Click Action button and choose Start Control Panel to use control panel. 11. The dialog box will show up with "This application is not part if Window Live Message..." Tick the box of "Don't show me this again" and click OK. 19 - TP-Link TL-SC4171G | User Guide - Page 25
12. The IP Camera will accept your invitation to start Control Panel. 13. You can click Camera icon to snapshot then the picture will send to you immediately. Snapshot 20 - TP-Link TL-SC4171G | User Guide - Page 26
Brightness , Contrast , Saturation and Hue . After the adjustment of all setting, you can still click original setting. to make the setting back to the Image Setup 21 - TP-Link TL-SC4171G | User Guide - Page 27
left side of main configuration are Setting, Client Setting, Image Setup and PT/PTZ control. Please see the content behind for more details. In the right hand side of the below picture, you can see the Live View screen of web user interface. There are some functions, such as Snapshot, Zoom and - TP-Link TL-SC4171G | User Guide - Page 28
Table. 6.1.4 Audio buttons Symbols Meaning Note Speakers turned on mean the speakers of your computer are turned on to transmit the sounds from the connected IP camera(s) 23 - TP-Link TL-SC4171G | User Guide - Page 29
to the connected IP camera(s) via the Ethernet using your microphone 6.2 Setting This function is only for the Administrator. Click SETTING to get into the Basic and Advanced Setting menu. The former includes for sub-folders, such as System, Camera, Network, and Security. The latter includes - TP-Link TL-SC4171G | User Guide - Page 30
unavailable if RTSP mode is "On." (Please check Setting → Basic → Camera → General.) 6.3.2 View Size Select the desired display image size to 640X480 the streaming more smoothly in unsteady network environment, but might cause a little delay in live viewing. 6.4 Image Setup You can use the tool bar - TP-Link TL-SC4171G | User Guide - Page 31
After the adjustment of all setting, you can still click Default to make the setting back to the original setting. 6.5 PT/PTZ Control 6.5.1 Pan / Tilt / Home control buttons If you want the IP camera to move, please click the arrow button of the corresponding direction. When you click button - TP-Link TL-SC4171G | User Guide - Page 32
) Note: Before you start this function, you need to specify Guard tour setting in Setting → Advance → Patrol. For more detailed information about Patrol functions, please refer to Section 8.3. 27 - TP-Link TL-SC4171G | User Guide - Page 33
Chapter 7 Setting-Basic Click the folder of Basic to display the sub folders including System, Camera, Network, and Security. 7.1 System Click the folder of System to display the sub-folders including Information, Date/Time, and Initialize. 7.1.1 Information The Information page provides the product - TP-Link TL-SC4171G | User Guide - Page 34
and time of this IP Camera is the same as the monitoring PC. z Manual setting: Select this mode to adjust manually the date and time of this IP Camera. z Synchronize with hour, and minute. ) Note: The NTP server (Network Time Protocol) is the time server which is an Internet standard protocol built on the top - TP-Link TL-SC4171G | User Guide - Page 35
only upgrade files that are special for this IP Camera. Otherwise problems may occur. Don't turn off the IP Camera power or disconnect the network until the upgrading is completed. ) Note: After upgrading new firmware, please execute "Factory Default" first to make it work. ¾ Upload Language Pack - TP-Link TL-SC4171G | User Guide - Page 36
Click the folder of Camera to display the sub folders including General, MPEG4 and MJPEG. 7.2.1 General ¾ RTSP: Switch RTSP "On" or "Off." When the RTSP mode is "On", MJPEG streaming is unavailable. z RTSP Port: Specify the transmission port number of RTSP streaming. The default value is 554. z Port - TP-Link TL-SC4171G | User Guide - Page 37
choose 50Hz, 60Hz or Auto. If you choose Auto option, the camera will adjust automatically to perform well. ¾ White Balance: You can choose Infrared) light is 10 meters (33 feet), and it is strongly suggested that you install it in a place without any barriers within 3 meters of the field of view - TP-Link TL-SC4171G | User Guide - Page 38
z Privacy Mask: You can cover a specific area of the video image with the black bar. The black bar can be moved. 7.2.2 MPEG-4 A. Computer View If RTSP is On (please check "Setting → Basic → Camera → General"), the option of Viewer Authentication and Multicast Streaming will appear. 33 - TP-Link TL-SC4171G | User Guide - Page 39
server address. z Video / Audio Port: Specify the transmission port number of the video data. Specify an even number from 1024 to 65535. z Time-to-Live: Set the maximum TTL that multicast can pass through. Specify the value from 1 to 255. ¾ Image Size: Specify the image size when the network camera - TP-Link TL-SC4171G | User Guide - Page 40
users will be requested to key-in username and password when viewing through RTSP. ¾ Multicast Streaming (If it's on): z Multicast Address: Specify the multicast server address Off (please check "Setting → Basic → Camera → General".), the option of Image Size, Frame rate and Quality will appear. 35 - TP-Link TL-SC4171G | User Guide - Page 41
¾ Image Size: Specify the image size when the network camera transmits. You can choose among 640 x 480, 320 x 240, Bitrate Table. 7.3 Network Click the folder of Network to display the sub folders including Information, PPPoE, DDNS, UPnP, Bonjour, IP Notification, Wireless (for wireless models) and - TP-Link TL-SC4171G | User Guide - Page 42
The page of Information displays the MAC address of the device. ¾ Obtain an IP address automatically (DHCP): If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server. ¾ Obtain DNS server address automatically: Select this to obtain the - TP-Link TL-SC4171G | User Guide - Page 43
function. For more details, please refer to Section 7.3.6. 4. If the IP Notification function is not configured to report the IP address of the camera, you can reset the camera to its factory default settings by pressing the Reset button. Then the camera can be found by Intelligent IP Installer. 38 - TP-Link TL-SC4171G | User Guide - Page 44
other sites on the internet to establish connection to the machine without needing to track the IP Address themselves. ¾ Server name: Choose the DDNS Server from the list. ¾ User ID: Enter the user ID for authentication necessary for DDNS connections. Type it up to 64 characters. ¾ Password: Enter - TP-Link TL-SC4171G | User Guide - Page 45
1. Login http://www.dyndns.org, click the Create Account. 2. Input all information and follow step by step with DynDNS. 40 - TP-Link TL-SC4171G | User Guide - Page 46
3. Login with new account and click Account → My Hosts → Add Host Services. 4. Type domain in the Hostname field and select sub-domain. 41 - TP-Link TL-SC4171G | User Guide - Page 47
5. After type information, check your DDNS service. 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS. After completing setting, reboot IP Camera. 42 - TP-Link TL-SC4171G | User Guide - Page 48
devices to connect seamlessly and simplify the implementation of networks in the home and corporate environments. The device supports UPnP which is enabled by default. The device will be automatically detected and a new icon will be added to "My Network Place" if it also enables on your computer. It - TP-Link TL-SC4171G | User Guide - Page 49
to automatically discover each other without the need to enter IP addresses or configure DNS servers. ¾ Device Name: Enter Device Name as you wish. ) Note: How to use Bonjour in your Windows Browser UI? Please check the link below: http://www.apple.com/support/downloads/bonjourforwindows.html. 44 - TP-Link TL-SC4171G | User Guide - Page 50
is set to "On", the camera will automatically send an e-mail notification to tell users its updated network parameters if the network settings about IP address, network connection type, HTTP port or wireless connection is changed or completed. (Some settings will take effect after rebooting - TP-Link TL-SC4171G | User Guide - Page 51
up to 384 characters. Default value provides network information including IP, Port, MAC, Model, Firmware Version and Web Version. 7.3.7 Wireless The wireless network has to be set up by using cable network connection. After setting the camera correctly, the wireless function can work with cable - TP-Link TL-SC4171G | User Guide - Page 52
connected to the wireless network. z MAC address - This displays the MAC address of the IP camera. z IP address - The IP address field is not for entering, but for displaying. It displays blank, 0.0.0.0 or an IP Address. When it is blank, the camera doesn't establish physical link with access point - TP-Link TL-SC4171G | User Guide - Page 53
the same as that of the desired AP or Router. 64/128-bit WEP, WPA-PSK and WPA2-PSK encryption security are supported by the camera. Click the desired wireless network in the network list above, the corresponding option will be selected as same as that of the desired AP or Router automatically. Here - TP-Link TL-SC4171G | User Guide - Page 54
9 Obtain an IP address automatically (DHCP) - If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server. 9 Use the following IP address - Select this when the fixed IP address is set. — IP address: Enter the IP address of the camera, which must - TP-Link TL-SC4171G | User Guide - Page 55
is the default value. z Mobile View: If Messenger function doesn't work due to the firewall or the function limit of router, please choose Mobile View. ¾ IP Notification: Switch the IP notification On/Off. If this feature switches On, camera will send IP notification to the users who are allowed - TP-Link TL-SC4171G | User Guide - Page 56
view. z Off: Authentication is not required to access the camera. Click Off and select one (among Admin, Operator and Viewer) from the pull list as default, then all users can view directly the video with the default permission without entering username and password. *If you want to have a higher - TP-Link TL-SC4171G | User Guide - Page 57
default TCP port (443) and an additional encryption / authentication layer between the HTTP and TCP, you can use the IP camera through HTTPS easily by using https:// instead of http://. ¾ Create & Install for different users. ) Note: When enable HTTPS with RTSP on mode, the IP Camera only protect - TP-Link TL-SC4171G | User Guide - Page 58
Output, Schedule, Alarm Input, Alarm Buffer, Motion detection and System Log. 8.1 PT/PTZ Control In this section, it provides Pan, Tilt, Auto Pan speed control setting. ¾ Pan speed: Specify the moving speed of the left and right commands. Available options are from 0 (slowest) to 100 (fastest). The - TP-Link TL-SC4171G | User Guide - Page 59
replace previous Home position. ¾ Reset: When writing the preset position name in Preset Pos. Name text box, press Reset to clean filed words. ¾ Delete , and then the camera will be set to the selected preset position. This button allows users to adjust the camera position more conveniently and - TP-Link TL-SC4171G | User Guide - Page 60
name: Rename the tour name. ¾ Tour position z Order: There are 8 orders to select for camera directions. z Select Pos.: There are preset positions to choose for each order. (For more information about value is among 0.5, 1, 2, 4, 8, 12 and 24 hours. ¾ Set as default tour: Tick it to set this tour as - TP-Link TL-SC4171G | User Guide - Page 61
then the camera will start the preset patrol tour. z Tour Stop: While the camera moves on image file which has been shot and recorded linked with the built-in motion detection function. up to 64 characters, or the IP address of the FTP server. ¾ User name: Type the user name for the FTP server. ¾ - TP-Link TL-SC4171G | User Guide - Page 62
Set to forward the image file to the specified FTP server linked with the alarm detection by the built-in motion detection function. Select On to send the image file to FTP server linked with the alarm detection. ¾ Remote Path: Type the path to the - TP-Link TL-SC4171G | User Guide - Page 63
) Note: You can set motion detection at motion detection page. (Please go to "Setting → Advanced →Motion Detection → Setting". For more details, please refer to Section 8.10.) z Alarm Input: Select the connected alarm. 9 Alarm input1: The external sensor which is connected to Alarm input1 of the - TP-Link TL-SC4171G | User Guide - Page 64
8.8.) 8.4.3 Periodical Sending You can set to send an image file to FTP server periodically by selecting On to send the image file to FTP server linked with setting period. ¾ Remote path: Type the path to the destination in FTP server up to 64 characters. ¾ Image file name: Type the file name - TP-Link TL-SC4171G | User Guide - Page 65
file which has been shot linked with the external sensor input or Network → IP Notification".) ¾ SMTP server name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server. ¾ SMTP Server Port: You can set port number from 1~65535 according to your mail server. The default - TP-Link TL-SC4171G | User Guide - Page 66
IP address of the POP server. This user account. z User name, Password: Type the User name and Password of the user's mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. ¾ Recipient e-mail address: Type the recipient e-Mail address - TP-Link TL-SC4171G | User Guide - Page 67
the mail with connection to the alarm detection by the built-in motion detection function. Select On to send the image file to SMTP server linked with the alarm detection. ¾ Alarm sending: Select On to set to send mail with connection to the alarm detection. ¾ File attachment: Set whether an image - TP-Link TL-SC4171G | User Guide - Page 68
) Note: You can set motion detection at motion detection page. (Please go to "Setting → Advanced →Motion Detection → Setting". For more details, please refer to Section 8.10.) z Alarm Input: Select the connected alarm. 9 Alarm input1: The external sensor which is connected to Alarm input1 of the - TP-Link TL-SC4171G | User Guide - Page 69
8.5.3 Periodical Sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server linked with setting period. ¾ Image file name: Type the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score - TP-Link TL-SC4171G | User Guide - Page 70
HTTP client function, you can send the command defined by yourself, linked with the external sensor input or with the built-in motion detection setting up the function. HTTP Event: Set up the HTTP server URL, port, User ID, Password, and Proxy server settings. For example: URL: 192.168.1.7/cgi-bin - TP-Link TL-SC4171G | User Guide - Page 71
commands via the alarm detection, external sensor input or built-in motion detection function. Select On to send the commands to HTTP server linked with the alarm detection. ¾ Alarm sending: Select On to set to send command with connection to the alarm detection. ¾ Alarm z Motion Detection: Click - TP-Link TL-SC4171G | User Guide - Page 72
) Note: 1. You can set motion detection at motion detection page. (Please go to "Setting → Advanced →Motion Detection → Setting". For more details, please refer to Section 8.10.) 2. Motion Detection works only when the MPEG4 function is On. 9 Parameter: the parameter of CGI (defined in URL of HTTP → - TP-Link TL-SC4171G | User Guide - Page 73
from your target device. For example, move=down. 9 Message: message will show up in the form of Message = PTZ down. If your target device didn't support the parameter of message, you can't see the message. So you can just take the message as a note. For example: PTZ down. ¾ Effective period: Set - TP-Link TL-SC4171G | User Guide - Page 74
-advanced menu, the Setting menu appears. You can set in this menu to control the alarm out of I/O port on the rear of the device linked to the alarm detection and the timer. Alarm output: To activate the Alarm output function, select On. When you do not use the Alarm output - TP-Link TL-SC4171G | User Guide - Page 75
) Note: You can set the alarm input function at alarm input page. (Please go "Setting →Advanced →Alarm input → Setting") ¾ Alarm Duration: There are up to 60 second options to choose for alarm duration interval. ¾ Effective period: Set the period when the periodical sending is effective. z Always: - TP-Link TL-SC4171G | User Guide - Page 76
camera will automatically move to that position. 8.10 Motion Detection There are three Motion Detection functions as sensors to set for different detecting zones. Each one has Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. Motion Detection function can support - TP-Link TL-SC4171G | User Guide - Page 77
, the sensitivity is lower; vice versa. The higher sensitivity it is and the more frequently it scans. 8.11 System Log The System Log function allows users to review any changes and events happened. The system starts logging automatically after started. 72 - TP-Link TL-SC4171G | User Guide - Page 78
¾ Enable remote log: Enables user to send the log data to a specified log server. 73 - TP-Link TL-SC4171G | User Guide - Page 79
RATE AND BITRATE TABLE Help to set IP Camera with your network environment to access Internet. Base on your network UPLOAD environment to choose the suitable Image-Quality setting. For example, if the network environment is ADSL 256Kb/s (upload)/2Mb/s (download), the most fluent Image-Quality needs - TP-Link TL-SC4171G | User Guide - Page 80
320*240 512 15 600 16 160*120 1024 30 950 30 160*120 1024 15 750 16 160*120 512 30 500 30 160*120 512 15 50 16 160*120 128 30 130 30 160*120 128 15 140 16 A.3. MJPEG @ 15fps / Kbps Quality 640*480 320*240 160*120 Excellent 4000 1500 600 Detailed 2400 900 - TP-Link TL-SC4171G | User Guide - Page 81
320*240 160*120 160*120 160*120 160*120 160*120 160*120 160*120 Medium 15 Medium 5 Excellent 15 Excellent 5 Good 15 Good 5 Medium 15 Medium 5 350 13 130 5 600 13 230 5 300 13 115 5 170 13 65 5 B. STORAGE REQUIREMENT TABLE Help to set Recording Storage System. Please - TP-Link TL-SC4171G | User Guide - Page 82
640*480 2048 30 640*480 2048 15 640*480 1536 30 640*480 1536 15 640*480 1024 30 640*480 1024 15 640*480 512 30 640*480 512 15 320*240 1536 30 320*240 1536 15 320*240 1024 30 320*240 1024 15 320*240 512 30 320*240 512 15 160*120 1024 30 160*120 1024 15 - TP-Link TL-SC4171G | User Guide - Page 83
B.5. MJPEG Storage Requirement GB / channel / day Image-Size Quality Setting Frame-Rate Setting Current Bitrate 640*480 Excellent 15 42.2 640*480 Excellent 5 16.9 640*480 Good 15 16.9 640*480 Good 5 6.9 640*480 Medium 15 9.5 640*480 Medium 5 3.8 320*240 Excellent 15 15 - TP-Link TL-SC4171G | User Guide - Page 84
C. TESTING SYSTEM SPECIFICATION Software: MainConsole Version 2.6.4 Professional CPU: AMD Athlon 64*2 @3600+MHz Memory Series Operating System: Windows XP Professional SP2 x64 D. PERFORMANCE OF 16 CHANNEL IP CAMERA Results from Test with a Resolution of 704×480 CCD IPCamera 704x480 Quality - TP-Link TL-SC4171G | User Guide - Page 85
328 (2004-11) V1.6.1 Electromagnetic compatibility and Radio user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services - TP-Link TL-SC4171G | User Guide - Page 86
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IEEE 802.11b or 802.11g
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
 |
 |
TL-SC4171G
Wireless Pan/Tilt Surveillance Camera
Rev: 1.0.0
1910010423