TP-Link TL-SG1210MPE TL-SG1210MPEUN V2 Installation Guide

© 2020 TP-Link

7106509089

REV4.1.0

Installation Guide

LED Explanation

Connection

Gigabit Easy Smart PoE+ Switch

Ethernet Ports (1-8)

Router

LAN Port

WAN Port

IP Camera

AP

IP Phone

PoE Devices

DC Power Adapter

AC Power Cord

PoE Ports (1–4)

Internet

PC

Configuration

The switch is plug and play. To configure the switch, you can use the Web-based

GUI or the configuration utility.

The utility is only supported on Windows now.

Using the Configuration Utility

1.

Go to https://www.tp-link.com/support and search the model number of your

switch. Download the

Easy Smart Configuration Utility

from the product

Support

web page on your PC.

Using the Web-based GUI

Note

:

1.

Find out the IP address of the switch.

By default, the switch receives an IP addess from a DHCP server (typically a

router with DHCP function enabled) in your network. You can find out this IP

address on the DHCP server.

If the switch cannot receive an IP address from a DHCP server, it uses the

static IP address of

192.168.0.1

, with a subnet mask of

255.255.255.0

.

2.

Configure IP address on your PC to make sure the switch and PC are in the

same subnet.

If the switch uses an IP address assigned by a DHCP server, set your PC to

obtain an IP address automatically from the DHCP server.

If the switch uses

192.168.0.1

as the IP address, configure your PC’s IP

address as

192.168.0.x

(”x” ranges from 2 to 254), and subnet mask as

255.255.255.0

.

Launch a web browser on your PC, enter the IP address of the switch in the

address bar and press

Enter

. Log in with

admin

as both user name and

password.

3.

Now you can configure the switch using the Web-based GUI. For further

information, refer to the

User Guide

.

Go to https://www.tp-link.com/support, search the model number of your switch,

and you can find this guide on the product

Support

web page.

Now you can configure the switch using the configuration utility. For further

information, refer to the

Easy Smart Configuration Utility User Guide

.

Go to https://www.tp-link.com/support, search the model number of your switch,

and you can find this guide on the product

Support

web page.

Double click the icon

on the desktop, and the

utility Home page will display a list of TP-Link

switches on the local network.

3.

2.

Decompress the downloaded file, run the

installation wizard and follow the prompts to install

the

Easy Smart Configuration Utility

.

4.

If the switch uses an IP address assigned by a

DHCP server, set your PC to obtain an IP

address automatically from the DHCP server.

If the switch uses

192.168.0.1

as the IP address,

configure your PC’s IP address as

192.168.0.x

(”x” ranges from 2 to 254), and subnet mask as

255.255.255.0

.

Click

to find out IP parameters of the switch.

Double click the switch that you want to configure. Log in with

admin

as both

user name and password.

5.

Note:

For simplicity, we will take TL-SG108PE for example throughout this Guide.

Power

PoE Status

On

: Providing PoE power

Flashing

: PoE fault

Off

: Not providing PoE power

On

:

Power on

Off

:

Power off

Link/Act; Uplink1, Uplink 2

Green On:

Running at 1000 Mbps, but no activity.

Green Flashing:

Running at 1000 Mbps and is transmitting or

receiving data.

Yellow On:

Running at 10/100 Mbps, but no activity.

Off:

No device is linked to the corresponding port.

Yellow Flashing:

Running at 10/100 Mbps and is transmitting

or receiving data.

PoE MAX

For TL-SG105PE:

On

:

58 W≤Total power supply < 65 W

Flashing

:

Total power supply ≥ 65 W

Off

:

Total power supply < 58 W

For TL-SG108PE:

On

: 57 W≤Total power supply < 64 W

Flashing

: Total power supply ≥ 64 W

Off

: Total power supply < 57 W

Note:

PoE ports can also connect to non-PoE devices, but only transmit data.

For certain devices, you may need to change the password the first time

you log in, which will better protect your network and devices.

2.

1.

If the switch gets a new IP address from the DHCP server, your

connection to the switch will be lost. Enter the new IP address in your

browser to access the switch again

.

Flashing

: Working abnormally or resetting

For TL-SG1210MPE:

On

: 116 W≤Total power supply < 123 W

Flashing

: Total power supply ≥ 123 W

Off

: Total power supply < 116 W

TP-Link TL-SG1210MPE TL-SG1210MPEUN V2 Installation Guide

TP-Link TL-SG1210MPE Manual

TP-Link TL-SG1210MPE manual content summary: