TP-Link TL-SG2216 TL-SG2424 v1 IG 7106503902
TP-Link TL-SG2216 Manual
 |
View all TP-Link TL-SG2216 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-SG2216 manual content summary:
- TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 1
Enterprise Networking Solution Installation Guide Gigabit Smart Switch TL-SG2216/TL-SG2424 - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 2
TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC STATEMENT This equipment has been tested in accordance with the instruction manual, may cause harmful for compliance could void the user's authority to operate the equipment - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 3
A Troubleshooting. Appendix B Hardware Specifications. Appendix C Technical Support. Audience This Installation Guide is for: Network Engineer Network Administrator Conventions Due to the similarity in structure of the Gigabit Smart Switch series, in this Installation Guide we take TL-SG2216 - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 4
15 SFP Port 15 Verify Installation 16 Power On 16 Initialization 16 Chapter 5 5.1 5.2 Con guration----------- 17 Con gure the Switch via GUI 17 Con gure the Switch Using CLI 18 Appendix A Troubleshooting --------- 20 Appendix B Hardware Speci cations ------ 21 Appendix C Technical Support - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 5
. TP-LINK Gigabit Smart Switch integrates multiple functions with excellent performance, and is friendly to manage, which can fully meet the need of the users demanding higher networking performance. 1111 Appearance ■■ Front Panel The front panel of TL-SG2216 is shown as the following figure. Reset - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 6
Gigabit Smart Switch Reset Press this button for five seconds or above to reset the software setting back to factory default settings. LEDs LED Status Indication On Power Off The Switch is powered on The Switch is powered off or power supply is abnormal On The Switch is working abnormally - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 7
The rear panel of TL-SG2424 is shown as the following figure. Gigabit Smart Switch Grounding Terminal Power Socket FFFFFFFFFFF Rear Panel of TL-SG2424 Grounding Terminal The Switch already comes with lightning protection mechanism. You can also ground the Switch through the PE (Protecting Earth) - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 8
Gigabit Smart Switch CCCCCCCCCC Installation 2222 Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor. One Switch One Power Cord This Installation Guide Two mounting brackets and the - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 9
Gigabit Smart Switch ■■ Site Requirements Temperature insulation materials and can thus significantly shorten the service life of the device. For normal temperature and the following measures: ■■ Use the power supply that can effectively filter interference from the power grid. ■■ Keep the device far - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 10
Gigabit Smart Switch the rack and device are well earthed. ■■ Make sure the power socket has a good contact with the ground. ■■ Keep a items: ■■ The rack or workbench is flat and stable, and sturdy enough to support the weight of 5.5kg at least. ■■ The rack or workbench has a good ventilation - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 11
Gigabit Smart Switch ■■ Desktop Installation To install the device on the desktop, please follow the steps: 111Set the device on a flat surface strong enough to support in an EIA standard-sized, 19-inch rack, follow the instructions described below: 111Check the grounding and stability of the rack. - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 12
Gigabit Smart Switch Rack FFFFFFFFFFF Rack Installation Caution: ■■ Please set 5~10cm gaps around the device for air circulation. ■■ Please avoid any heavy thing placed on the device. ■■ Please - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 13
Gigabit Smart Switch CCCCCCCCCC Lightning Protection 3333 Cabling Reasonably In the actual be grounded. Before connecting the cable to the device, install a signal lightning arrester on the corresponding port. ■■ It's not necessary to pave STP cables through pipes. The shielded layer of STP cable - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 14
Gigabit Smart Switch ■■ Requirements for Cabling Indoors When cabling indoors, keep a certain distance away from the devices that may cause high-frequency interferences, such as down-conductor cable, powerline, power . Other Pipelines Down-conductor PE Service pipe Compressed air pipe Thermal pipe - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 15
Gigabit Smart Switch different environments, the device may be grounded differently. The following will instruct you to connect the device to the ground in two ways, connecting to the grounding bar or connecting to the ground via the power cord. Please connect the device to ground in the optimum way - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 16
Gigabit Smart Switch Note: The grounding bar and the ground cable are not provided with our product. If needed, please self purchase them. ■■ Connecting to the Ground via the Power Supply If the device is installed in the normal environment, the device can be grounded via the PE (Protecting Earth) - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 17
Gigabit Smart Switch Grounding Terminal Ground Cable Equipotential Bonding Cable Grounding Bar use a power lightning arrester. Note: Power lightning arrester is not provided with our product. If needed, please self purchase it. Signal lightning arrester is used to protect RJ45 ports of the - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 18
Gigabit Smart Switch rules: ■■ The port rate of the signal lightning arrester should match the rate of the desired port on the device. If it is not matched, this signal lighting arrester will not work. Purchase a standard lightning arrester. ■■ Install signal lightning arrester near the - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 19
to the GUI (Graphical User Interface) of the Switch and configure its corresponding Speed and Duplex mode on Switching→Port→Port Config page. For 100Mbps module, please select 100MFD while select 1000MFD for gigabit module. By default, the Speed and Duplex mode of SFP port is 1000MFD. Connection 15 - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 20
Gigabit Smart Switch 4444 Verify Installation After completing the installation, please verify the following items: ■■ There are 5~10cm of clearance around the sides of the device for ventilation and the air flow is adequate. ■■ The voltage of the power supply meets the requirement of the input - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 21
addresses of the Switch. The IP address is 192.168.0.x ("x" is any number from 2 to 254), Subnet Mask is 255.255.255.0. For the detailed instructions as to how to do this, please refer to Appendix B in the User Guide on the Resource CD. 222Enter admin for the default User Name and Password, both in - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 22
Gigabit Smart Switch FFFFFFFFFFFFMain Page of the Switch 5555 Configure the Switch Using CLI You can log on to the Switch and access the CLI by Logging on to the Switch remotely by a Telnet connection through an Ethernet port. To log on to the switch by a Telnet connection, please take the following - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 23
Gigabit Smart Switch 333Type cmd in the prompt Run window as Figure 5-5 and click OK. FFFFFFFFFFFFRun Window 444Type telnet 192.168.0.1 in the command prompt shown as Figure 5-6, and press the Enter button. FFFFFFFFFFFFConnecting to the Switch Configuration 19 - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 24
as the following figure. 222 Press the Reset buttom for at least 5 seconds to reset the system. The system will be reset to the factory default settings, and the default login user name and password are both admin. QQQQ Why does the Power LED work abnormally? The Power LED should be lit up when the - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 25
Appendix B Hardware Specifications Gigabit Smart Switch Item Content IEEE 802.3 10Base-T Ethernet or above (maximum 100m1 1000Base-X: MMF or SMF SFP Module (Optional1 Power, System, 1000Mbps, Link/Act 0℃~40℃ -40℃~70℃ 10%~90%RH Non-condensing 5%~90%RH Non-condensing Hardware Specifications - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 26
Gigabit Smart Switch Appendix C Technical Support ■■ For more help, please go to: www.tp-link.com/support/faq.asp ■■ To download the latest Firmware, Driver, Utility and User Guide, go to: www.tp-link.com/support/download.asp ■■ For all other technical support, please contact us by using the - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 27
Russian Federation Ukraine Brazil Poland Gigabit Smart Switch Service time: Monday to Friday 9:00 AM to 6:00 PM GMT+ 1 or GMT+ 2 (Daylight Saving Time in Germany) *Except bank holidays in Hesse Tel: +41 (0)848 800998 (German Service) E-mail: [email protected] Fee: 4-8 Rp/min, depending - TP-Link TL-SG2216 | TL-SG2424 v1 IG 7106503902 - Page 28
Website: http://www.tp-link.com E-mail: [email protected] 7106503902 Rev: 1.0.0
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
Installation Guide
Gigabit Smart Switch
TL-SG2216/TL-SG2424
Enterprise Networking Solution