TP-Link TL-SG2224WEB User Guide

TP-Link TL-SG2224WEB Manual

Get TP-Link TL-SG2224WEB PDF manuals and user guides
UPC - 845973020460
View all TP-Link TL-SG2224WEB manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link TL-SG2224WEB manual content summary:

  • TP-Link TL-SG2224WEB | User Guide - Page 1
    User's Guide TL-SG2216WEB 16-port Gigabit Web Smart Switch TL-SG2224WEB 24-port Gigabit Web Smart Switch
  • TP-Link TL-SG2224WEB | User Guide - Page 2
    TP-LINK Technologies Co., Ltd. Copyright © 2006 TP-LINK Technologies Co., Ltd. All rights reserved. FCC STATEMENT This equipment has been tested used in accordance with the instructions, may cause harmful interference turning the equipment off and on, the user is encouraged to try to correct the
  • TP-Link TL-SG2224WEB | User Guide - Page 3
    which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any
  • TP-Link TL-SG2224WEB | User Guide - Page 4
    Introduction 2 1.1 Intended Audience 2 1.2 Agreement 2 1.3 Guide Overview 2 Chapter 2: Device Description 4 2.1 Introduction to Desktop or Shelf Installation 7 3.1.2 Rack Installation 7 3.1.3 AC Power 8 3.2 Switch Aspect Description 8 3.2.1 Front Panel 8 3.2.2 Back Panel 9 3.2.3 SFP
  • TP-Link TL-SG2224WEB | User Guide - Page 5
    Reboot & Reset 11 4.1.4 User...12 4.2 Port Setting 12 4.2.1 Port Parameter 12 4.2.1.1 Duplex Mode 12 4.2.1.2 Flow Control 12 4.2.1.3 Port Security 12 4.2.2 Port Statistic and Port Status 13 4.2.3 Storm Control 13 4.2.4 Port Description 13 4.3 Network Setting 14 4.3.1 Switch IP Address 14
  • TP-Link TL-SG2224WEB | User Guide - Page 6
    Transfer 31 5.3.1.3 Reboot & Reset 32 5.3.1.4 User 33 5.3.2 Port Setting 33 5.3.2.1 Port Parameter 33 5.3.2.2 Port Statistic 36 5.3.2.3 Port Status 38 5.3.2.4 Storm Control 39 5.3.2.5 Port Description 40 5.3.3 Network Setting 41 5.3.3.1 Switch IP Address 41 5.3.3.2 Static MAC Address 42
  • TP-Link TL-SG2224WEB | User Guide - Page 7
    5.3.6.2 Port-Based Priority 58 5.3.6.3 Port Default Priority 59 5.3.6.4 802.1p Priority Class 59 5.3.7 Port Mirroring 60 5.3.8 Virtual Cable Test 61 Appendix A Pin Explain For RJ-45 Connector 63 Appendix B Table of Factory Defaults 65 Appendix C Table of Function Differences of Switch Family
  • TP-Link TL-SG2224WEB | User Guide - Page 8
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Package contents The following contents should be found in your box:  One Web Smart Switch  One AC power cord  User Guide  Two mounting brackets and other fittings Note: If any of the listed contents are damaged or missing,
  • TP-Link TL-SG2224WEB | User Guide - Page 9
    usage of this switch family. The "switch" referred in this guide indicates the TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family. 1.3 Guide Overview This user guide is divided into the following sections to provide concise information for configuring, and managing the TP-Link device: Section
  • TP-Link TL-SG2224WEB | User Guide - Page 10
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Appendix A: Pin Explanation for RJ-45 Connector Appendix B: Table of Factory Defaults Appendix C: Table of Function Differences of Switch Family 
  • TP-Link TL-SG2224WEB | User Guide - Page 11
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Chapter 2: Device Description 2.1 Introduction to the Device The TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family is compliant with IEEE802.3 Ethernet protocols. The EIA-standardized framework and smart configuration
  • TP-Link TL-SG2224WEB | User Guide - Page 12
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 10M  Support MAC address table of 8K entries  Support MAC address learning and aging time  Support port-based VLAN and IEEE802.1Q tag VLAN  Support trunks  Support management via WEB browser  Support port-based priority and
  • TP-Link TL-SG2224WEB | User Guide - Page 13
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Transmission Medium Power LED Port Dimensions (L×W×H) Operating Environment is supplied or not 10/100/1000Mbps RJ-45 port: Link/Act and 1000Mbps LED SFP port: 1000Mbps Link/Act LED 440mm×260mm×44mm Operating Temperature: 0OC ~
  • TP-Link TL-SG2224WEB | User Guide - Page 14
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Chapter 3: Mounting Device 3.1 TL-SG2216WEB 16-port Gigabit Web-Smart Switch Power System 2 4 6 8 FAN2 FAN1 1 2 3456 Link/Act 7 8 10 12 14 16 1 3 5 7 1000Mbps 9 11 13 15 9 10 11 12 13 14 Link/Act 15 16
  • TP-Link TL-SG2224WEB | User Guide - Page 15
    Description 3.2.1 Front Panel The front panel of TL-SG2216WEB is configured as follows: R TL-SG2216WEB 16-port Gigabit Web-Smart Switch Power System 2 4 6 8 10 12 14 16 FAN2 12 3 4 5 6 7 8 Link/Act 9 10 11 12 13 14 15 16 Link/Act SFP 1 SFP 2 RESET FAN1 1 3 5 7 1000Mbps 9 11
  • TP-Link TL-SG2224WEB | User Guide - Page 16
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide normally. 3) 1000Mbps LED: When a GIGA port is connected to a 1000Mbps device, the corresponding LED turns on in solid green; when the port is connected to a 10/100Mbps device, the LED turns off. 4) Link/Act LED: Will be solid
  • TP-Link TL-SG2224WEB | User Guide - Page 17
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 3.2.3 SFP Module The SFP port accommodates a standard SFP module, support 100Base-FX and 1000Base-X Ethernet standard. (SFP optics is optional) The SFP module supports hot-plugging. Plug the SFP module into the SFP port and the
  • TP-Link TL-SG2224WEB | User Guide - Page 18
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Chapter 4: Function Description This section presents the network concepts referred in switch function description. 4.1 System Setting System setting contains the following topics: displaying and configuring the switch
  • TP-Link TL-SG2224WEB | User Guide - Page 19
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 4.1.4 User The username and password can be modified in order to exclude illegal users. 4.2 Port Setting 4.2.1 Port Parameter 4.2.1.1 Duplex Mode Ports have duplex modes, 10M HD, 10M FD, 100M HD, 100M FD and 1000M FD. The First
  • TP-Link TL-SG2224WEB | User Guide - Page 20
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide transmit the frames from the MAC address list in the port's static MAC address table. 4.2.2 Port Statistic and Port Status Port Statistic calculates the statistics of each port, such as how many frames, error frames, broadcast
  • TP-Link TL-SG2224WEB | User Guide - Page 21
    -SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 4.3 Network Setting The network module provides setting switch IP address, dynamic binding and aging time, configuring static MAC address and filtering MAC address, displaying dynamic bound address and ping functions. 4.3.1 Switch
  • TP-Link TL-SG2224WEB | User Guide - Page 22
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 4.3.2 Aging Time and Dynamic Address Table A dynamic MAC address table is maintained inside the switch. A MAC address is the physical address of a network device; it is six-bytes long and should be hole in a subnet. A network
  • TP-Link TL-SG2224WEB | User Guide - Page 23
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide MAC learning, which enhances the efficiency of packets forwarding. The MAC addresses already configured in static MAC address table cannot be added to filtering MAC address table. The static MAC address table capacity of
  • TP-Link TL-SG2224WEB | User Guide - Page 24
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide management computer or that of the default gateway to the static MAC address table; otherwise, the management channel may be broken down. 4.3.6 Ping The ping function is to test the connectedness of the link between the switch
  • TP-Link TL-SG2224WEB | User Guide - Page 25
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 1) Port VLAN VLANs are divided basic on ports. 2) IEEE802.1Q Tag VLAN The IEEE802.1Q protocol defines a new format of the frame; it adds a tag header in the original Ethernet frame, as follows:
  • TP-Link TL-SG2224WEB | User Guide - Page 26
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 4.5 Port Trunking Trunking refers to Link Aggregation. It optimizes port usage by linking a group of ports together to form a single trunk (aggregated groups). The bandwidth of the Trunk is the sum of bandwidth of its member port
  • TP-Link TL-SG2224WEB | User Guide - Page 27
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 4.6.2 Port-Based Priority Four priority classes (lowest, lower, higher and highest) are available for a switch port in port-based priority mode. The priority class of the port is applied to the all packets entering from the port.
  • TP-Link TL-SG2224WEB | User Guide - Page 28
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide the quality of the cables connected to the port. Some of the possible problems than can be diagnosed include opens, shorts, cable impedance mismatch, bad connectors, termination mismatch, and bad magnetics. It can also test the
  • TP-Link TL-SG2224WEB | User Guide - Page 29
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Chapter 5: WEB Management 5.1 Overview The Web-Smart switch is managed via WEB pages. The smart and friendly interfaces make the switch management an easy job. 5.2 Connecting to the Device 5.2.1 Getting Started Before connecting
  • TP-Link TL-SG2224WEB | User Guide - Page 30
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-1 Internet Options Dialog Secondly, click the "Settings" button hinted in figure 5-1, a new dialog will display: Figure 5-2 Settings Dialog 23
  • TP-Link TL-SG2224WEB | User Guide - Page 31
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide In case of IE5.0, please check the option "Every visit to the page"; otherwise, some wrong information may display in WEB pages. If the IE version is 6.0, "Every visit to the page" or "Automatically" are both appropriate. Click
  • TP-Link TL-SG2224WEB | User Guide - Page 32
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-4 Security Settings Fourthly, Select the "Medium" option of the combo box indicated in figure 5-4, click the "Reset" button, and click "OK" to quit. Fifthly,
  • TP-Link TL-SG2224WEB | User Guide - Page 33
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Click the "Settings" label, set the screen resolution to 1024 x 768 and click "OK". All the necessary IE configuration is completed. 5.2.2 Login the Switch Supposing the switch IP address is set as 192.168.0.1, open a web browser
  • TP-Link TL-SG2224WEB | User Guide - Page 34
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-7 TL-SG2216WEB Main Page 1) The main part of the page is the main window to display the configuration page. 2) The Port Led Indicator table lies at the top of the page. It provides a visual representation of the ports on
  • TP-Link TL-SG2224WEB | User Guide - Page 35
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Click on the icon of the port to open a new window, which shows the details status of the port, as following: Figure 5-10a Port Status Table Figure 5-10b SFP Status Table (uninstalled) Figure 5-10c SFP Status Table (installed) 28
  • TP-Link TL-SG2224WEB | User Guide - Page 36
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 3) On the left side of the page is the menu table. It contains 8 main menus. Each menu has a submenu. Click on a menu, it will open its submenu and the main window displays the configuration page of the submenu list first, click
  • TP-Link TL-SG2224WEB | User Guide - Page 37
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide The following shows main page of the TL-SG2224WEB: Figure 5-12 TL-SG2224WEB Main Page 5.3.1 System Setting System setting contains four topics: system information, file transfer, reboot & reset and user. 5.3.1.1 System
  • TP-Link TL-SG2224WEB | User Guide - Page 38
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Software Version: Displays the installed software version file transfer supported by the switch.  File Name: Identifies the file to be loaded or to be backuped on TFTP server.  TFTP Server IP: Indicates the IP address of
  • TP-Link TL-SG2224WEB | User Guide - Page 39
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Configuration Backup: Means backing up the current configuration of the switch to TFTP server.  Configuration Loading: Means downloading the configuration from TFTP server to the switch and update it. Notice: 1) Please make
  • TP-Link TL-SG2224WEB | User Guide - Page 40
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 5.3.1.4 User This page provides the interface of configuring username and password. Figure 5-17 User Configuration You are kindly suggested to retype the new password in "Confirm new password" box instead of copying in order to
  • TP-Link TL-SG2224WEB | User Guide - Page 41
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-18 Port Parameter  Port Status: Indicates whether the port is operational or non-operational." Enable" Indicates that the port is operational and "Disable" Indicates the port is non-operational. If a port is unused for
  • TP-Link TL-SG2224WEB | User Guide - Page 42
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide combo port, only one operation type can be active at a time, if both ports are connected at the same time, the SFP port has the priority of being active. The combo port uses the same configuration, for example, in TLSG2216WEB, if
  • TP-Link TL-SG2224WEB | User Guide - Page 43
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Notice: Though the SFP module support hot-plugging,but the configuration of Duplex Mode could not change automatically,after switching between UTP,100M SFP and 1000M SFP on the combo port,please modify its Duplex Mode manually or
  • TP-Link TL-SG2224WEB | User Guide - Page 44
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Tx Collisions: The number of collision events seen by the MAC. This counter is applicable in half-duplex only.  Tx Ucast: The number of frames
  • TP-Link TL-SG2224WEB | User Guide - Page 45
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide between 65 and 127 octets inclusive, including those with errors.  128 to "Reset" button to reset all of the statistic counters to zero. 5.3.2.3 Port Status This page display the port status, it contains the following fields: 38
  • TP-Link TL-SG2224WEB | User Guide - Page 46
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-20 Port Status  Port Status: Indicates whether the port is linked, not linked, or disabled.  Speed (Mbps): Indicates the port speed with the unit of Mbps.  Duplex Mode: Indicates the port duplex mode.  Flow Control:
  • TP-Link TL-SG2224WEB | User Guide - Page 47
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-21 Storm Control  Broadcast Control: Enable or disable the broadcast control to limit the broadcast frames. Ports belong to the same Trunk should have the same value  Multicast Control: Enable or disable the multicast
  • TP-Link TL-SG2224WEB | User Guide - Page 48
    -SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Input description words in the Description field for each port. Notice that at most 15 letters or numbers can be held in each field. Figure 5-22 Port Description 5.3.3 Network Setting This page contains the following topics: switch
  • TP-Link TL-SG2224WEB | User Guide - Page 49
    Web Smart Gigabit Switch Family User's Guide  DHCP Client: Indicates whether the DHCP function is enabled. If DHCP client is enabled, the switch will obtain the IP address, netmask and default gateway from the DHCP server automatically; otherwise, these three items should be configured manually
  • TP-Link TL-SG2224WEB | User Guide - Page 50
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide A MAC address and its corresponding switch port should be provided when adding a static MAC address entry.  Search: Input the MAC address in "Mac Address" field and click "Search" button. If that MAC
  • TP-Link TL-SG2224WEB | User Guide - Page 51
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Add: Input the MAC address in the "MAC Address" field and select a port number in "Corresponding Port MAC address table, is connected to a wrong switch port (not the port configured in static MAC address entry), all the packets
  • TP-Link TL-SG2224WEB | User Guide - Page 52
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide discarded by the switch no matter which port they enter from. This page provides the function of adding, searching a filtering MAC address and changing the entry state. The filtering MAC address entry is applicable to all switch
  • TP-Link TL-SG2224WEB | User Guide - Page 53
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide MAC addresses. The MAC addresses bound by the switch port are always valid and won't age. If the specified number is reached, the port stops binding and transfers into secure state. The bound MAC addresses can be queried in the "
  • TP-Link TL-SG2224WEB | User Guide - Page 54
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Binding: Three options are available. A further explanation is stated below.  Number of MAC Address to Bind: Indicates the max number of MAC addresses that one switch port can bind.  Number of Bound MAC Address: Indicates the
  • TP-Link TL-SG2224WEB | User Guide - Page 55
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Further Explanation 1) If the port is set to secure port manually in "Port Parameter " page, the dynamic binding cannot be configured here. If the port with dynamic binding enabled transfers into secure state automatically
  • TP-Link TL-SG2224WEB | User Guide - Page 56
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Further Explanation 1) The bound MAC address table contains all the MAC addresses bound by the switch ports. Every entry contains one MAC address and its corresponding port number. 2) The bound MAC address table is divided into
  • TP-Link TL-SG2224WEB | User Guide - Page 57
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide the time of the dynamic MAC address to test the connectedness of the link between the switch and destination. This page is shown below: Figure 5-31 Ping  Destination IP Address: Indicates the IP Address of the test destination.
  • TP-Link TL-SG2224WEB | User Guide - Page 58
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-32 VLAN Mode  VLAN Disable: Do not set any VLAN in the switch, all ports of the switch can communicate with each other.  Port VLAN (Port-Based VLAN): Set the Port-Based VLAN mode.  Tag VLAN (802.1Q Tag VLAN): Set the
  • TP-Link TL-SG2224WEB | User Guide - Page 59
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  VLAN: The VLAN number. Select the number of the VLAN you want to configure here.  Port: The switch port number.  Member: Select the member of the VLAN here. If this field is checked, it indicates the port belongs to the
  • TP-Link TL-SG2224WEB | User Guide - Page 60
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide each other. 6) The number of Port VLAN can be set is the same as the switch port number. 5.3.4.3 Tag VLAN Global Setting This page displays when the switch is in Tag VLAN mode, the global setting of the ports will affect all Tag
  • TP-Link TL-SG2224WEB | User Guide - Page 61
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Notice: If any Trunk has be set, the Trunk can be configured, but member ports of the Trunk is not able to be configured and in the fields it display the parameters of the Trunk they belong to.(see port1 and 2 in the figure for
  • TP-Link TL-SG2224WEB | User Guide - Page 62
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  VLAN ID: configure the VLAN ID.  Port: The switch port number.  Member: Select the member of the VLAN here. If this field is checked, it indicates that the port belongs to the current VLAN.  Egress Frame: The solution to the
  • TP-Link TL-SG2224WEB | User Guide - Page 63
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 4) If the port is connected to a device that doesn't support IEEE802.1Q (e.g. HUB and some network adapter), value of the Egress Frame field should be set to "Drop Tag". 5) For the first time the Port VLAN mode is set, a default
  • TP-Link TL-SG2224WEB | User Guide - Page 64
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 5.3.5 Port Trunking This page contains the following fields: Figure 5-39 Port Trunking  Trunk: The Trunk number.  Member: Select the member of the Trunk here. Each group has 4 optional ports to compose a Trunk.  Select All:
  • TP-Link TL-SG2224WEB | User Guide - Page 65
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 5.3.6.1 Priority Mode This page is showed as below: Figure 5-40 Priority Mode  Priority Mode: Contains "Disable", "Port-Based" and "IEEE802.1p".  Priority Rule: Contains "Weighted" and "Fixed". If the priority mode is set to "
  • TP-Link TL-SG2224WEB | User Guide - Page 66
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide entering from the port of the switch are forwarded in the corresponding priority queue. Further Explanation When priority rule is configured as "weighted", a 1,2,4,8 weighting is applied to forward these four classes of packets.
  • TP-Link TL-SG2224WEB | User Guide - Page 67
    SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Figure 5-43 802.1p Priority  Priority Tag: The priority tag defined in IEEE802.1p.  Corresponding Priority Class: Indicates the inner priority classes of switch. The tagged frames are classified into four classes inside the switch
  • TP-Link TL-SG2224WEB | User Guide - Page 68
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Mirror Mode: You can set the mirror mode to monitor the ingress traffic, egress traffic, or both traffic. You can also disable the port mirroring.  Mirror Port: Defines the port to monitor the traffic, Trunk member can't
  • TP-Link TL-SG2224WEB | User Guide - Page 69
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Link Status: Reports good status or issues such as cable opens, cable shorts or any impedance mismatch in the cable.  Link Length: Reports the range of the cable length if the link status is good.  Fault Distance: Reports the
  • TP-Link TL-SG2224WEB | User Guide - Page 70
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Appendix A Pin Explain For RJ-45 Connector The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using straight cables. Transmission devices connected to each other use crossed cables. The
  • TP-Link TL-SG2224WEB | User Guide - Page 71
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 1 TX+ 2 TX- 3 RX+ 6 RX- RX+ 1 RX- 2 TX+ 3 TX- 6 MDI-II MDI-X Figure straight cable Crossed cable: use to connect switch (normal port) to switch/hub/other device(normal port). 1 RX+ 2 RX- 3 TX+ 6 TX- RX+ 1 RX- 2 TX+ 3 TX-
  • TP-Link TL-SG2224WEB | User Guide - Page 72
    -SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Appendix B Table of Factory Defaults Table of Factory Defaults: System Setting Port Setting Network Setting System Name System Information System Location Contact Information File Transfer Transfer Type File Name User User
  • TP-Link TL-SG2224WEB | User Guide - Page 73
    TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide Aging Time Network Setting Ping VLAN Setting VLAN Mode Port VLAN Setting Tag VLAN Global Setting Tag VLAN Setting Port Trunking MTU VLAN Setting No configured Trunk Priority Mode Priority Setting Port-Based Priority Port
  • TP-Link TL-SG2224WEB | User Guide - Page 74
    Web Smart Gigabit Switch Family User's Guide Appendix C Table of Function Differences of Switch Family Table of Function Differences of Switch Family Function Port Giga Port SFP Port Trunk Port VLAN Tag VLAN Static MAC Filtering MAC Dynamic Binding MAC Power Consumption TL-SG2216WEB 16 16 2 4 16
  • TP-Link TL-SG2224WEB | User Guide - Page 75
    71035568 TP-LINK TECHNOLOGIES CO., LTD. E-mail: [email protected] Website: http://www.tp-link.com Add: Fl.3,Bldg.R1-B,High-Tech Industrial Park, Shenzhen Road, Shenzhen,China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
User's Guide
24-port Gigabit Web Smart Switch
TL-SG2224WEB
Rev:
1.0
TL-SG2216WEB
16-port Gigabit Web Smart Switch