TP-Link TL-SL1218P Unmanaged PoE/PoE SwitchUN Installation Guide
TP-Link TL-SL1218P Manual
View all TP-Link TL-SL1218P manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-SL1218P manual content summary:
- TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 1
Business Networking Solution Installation Guide Unmanaged PoE+ Switch - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 2
- TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 3
Appendix A Troubleshooting Appendix B Hardware Specifications Audience This Installation Guide is for: Network Engineer Network Administrator Conventions • Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 4
6 2.2 Safety Precautions 6 2.3 Installation Tools 8 2.4 Product Installation 8 Chapter 3 Connection 10 3.1 Ethernet Port 10 3.2 SFP Port 10 3.3 Verify Installation 10 3.4 Power On 11 3.5 Initialization 11 Appendix A Troubleshooting--------- 12 Appendix B Specifications---------- 13 - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 5
Chapter 1 Introduction 1.1 Product Overview TL-SL1218P, TL-SL1218MP, and TL-SL1226P are Power Sourcing Equipment (PSE*) which require no configurations. The 10/100 Mbps RJ45 ports on the switch support the Power over Ethernet (PoE*) function, which can automatically detect and supply power to - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 6
+ Switch LED Link/Act PoE Status PoE Max Indication Port 1-16 On: Running at 10/100 Mbps but no activity. Flashing: Running at 10/100 Mbps and is transmitting or receiving data. Off: No device is linked to the corresponding port. Port 17-18/18F (for TL-SL1218P) Port 17-18/17F-18F (for TL-SL1218MP - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 7
The maximum PoE power for all PoE ports is 150 W (for TL-SL1218P)/250 W (for TL-SL1218MP). The ports can also connect to non-PoE devices, but only panel of TL-SL1226P is shown as the following figure. Figure 1-3 Front Panel of TL-SL1226P LEDs LED PWR Link/Act PoE Status LEDs Switches 10/100 - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 8
switch 1-8, 9-16 and 17-24 can control the rate and power supply distance of corresponding ports. Off: The corresponding ports (1-8/9-16/17-24) run at 10/100 Mbps and support the following figure. Here we take TL-SL1218MP as an example. Figure 1-4 Rear Panel Kensington Security Slot 4 - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 9
lightning protection, go to https://www.tp-link.com/support, search the model number of your switch and go to the product Support web page, refer to the Lightning Protection Guide from the Related Documents: https://www.tp-link.com/us/configuration-guides/lightning_protection_guide/. Introduction 5 - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 10
the listed items is damaged or missing, contact your distributor. One Switch One Power Cord Two mounting brackets, eight screws and four rubber feet This Installation Guide Business Networking Solution Installation Guide 2.2 Safety Precautions To avoid any device damage and bodily injury caused - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 11
aging of the insulation materials, significantly shortening the service life of the device. To find out the best 90%RH Non-condensing 5% to 90%RH Non-condensing Clearness The dust accumulated on the switch can be absorbed by static electricity and result in poor contact of metal contact points. - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 12
measures, go to https://www.tp-link.com/support, search the model number of your switch and go to the product Support web page, refer to the Lightning Protection Guide from the Related Documents: https://www.tp-link.com/us/configuration-guides/lightning_protection_guide/. Installation Site When - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 13
Figure 2-1 Desktop Installation Unmanaged PoE+ Switch Feet Bottom of the Device Notch ■■ Rack Installation To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below: 1. Check the efficiency of the grounding system and the stability of the rack. 2. - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 14
Chapter 3 Connection 3.1 Ethernet Port Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows. Figure 3-1 Connecting the RJ45 Port RJ45 Port RJ45 Cable 3.2 SFP Port The following figure - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 15
3.4 Power On Unmanaged PoE+ Switch Plug the negative connector of the provided power cord into as follows: 1. The PWR LED indicator will light up and keep on. 2. After the initialization, the Link/Act LED indicator for 10/100/1000 Mbps ports and SFP ports will first turn green and then yellow - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 16
) and port 9-24 (for TL-SL1226P) may not supply power for connected PoE devices. For example, on TL-SL1218MP, port 1-7 and port 9 are consuming 30 W respectively. If an additional PoE device with 11 W is inserted to port 8, the system will cut off the power to port 9. 12 Appendix A Troubleshooting - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 17
Port: Port 1-16 Total Power Supply: 150 W For TL-SL1218MP PoE Port: Port 1-16 Total Power Supply: 250 W For TL-SL1226P PoE Port: Port 1-24 Total Power Supply: 250 W Switching Capacity 7.2 Gbps (for TL-SL1218P/TL-SL1218MP) 8.8 Gbps (for TL-SL1226P) Mac Address Table 8K Transfer Method Store - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 18
)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce. Safety Information • Keep the device away from water, fire, attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Place the device with its bottom surface - TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 19
- TP-Link TL-SL1218P | Unmanaged PoE/PoE SwitchUN Installation Guide - Page 20
To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community. For technical support, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the QR code. If you have
Business Networking Solution
Installation Guide
Unmanaged PoE+ Switch