TP-Link TL-WA5110G User Guide - Page 21
Quick Setup - Wireless - configure ap router mode
UPC - 845973051327
View all TP-Link TL-WA5110G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Figure 3-13 Quick Setup - Static IP ) Note: The IP parameters should have been provided by your ISP. ¾ IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field. ¾ Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0. ¾ Default Gateway - Enter the gateway IP address into the box if required. ¾ Primary DNS - Enter the DNS Server IP address into the boxes if required. ¾ Secondary DNS - If your ISP provides another DNS server, enter it into this field. 3. After you complete the above, click Next, the Wireless settings page will appear below. Figure 3-14 Quick Setup - Wireless settings On this page, you can configure the following wireless parameters: ) Note: The Quick Setup - Wireless page differs in different modes. If you choose the AP Router mode, you will see the Wireless page as below. 13