TP-Link TL-WA701ND User Guide
TP-Link TL-WA701ND Manual
 |
UPC - 845973051402
View all TP-Link TL-WA701ND manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-WA701ND manual content summary:
- TP-Link TL-WA701ND | User Guide - Page 1
TL-WA701ND 150Mbps Wireless Lite N Access Point Rev: 2.0.1 1910010272 - TP-Link TL-WA701ND | User Guide - Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced - TP-Link TL-WA701ND | User Guide - Page 3
user's authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna Mobile Configurations. The antennas used for this transmitter must be installed to - TP-Link TL-WA701ND | User Guide - Page 4
for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Country Restriction Reason/remark Bulgaria None General authorization required for outdoor use and public service France - TP-Link TL-WA701ND | User Guide - Page 5
equipment: Product Description: 150Mbps Wireless Lite N Access Point Model No.: TL-WA701ND Trademark: TP-LINK We declare under our own for marking this declaration: Yang Hongliang Product Manager of International Business TP-LINK TECHNOLOGIES CO., LTD. South Building, No.5 Keyuan Road, Central - TP-Link TL-WA701ND | User Guide - Page 6
Installation 7 2.1 Before You Begin 7 2.2 Basic Requirements 7 2.3 Connecting the Device 7 Chapter 3 Configure the PC 9 Chapter 4 Configure the Device 13 4.1 Login ...13 4.2 Status...13 4.3 QSS ...15 4.4 Network...21 4.5 Wireless ...22 4.5.1 Wireless Settings 22 4.5.2 Wireless Security - TP-Link TL-WA701ND | User Guide - Page 7
4.7.5 Backup & Restore 58 4.7.6 Ping Watch Dog 58 4.7.7 Reboot ...59 4.7.8 Password ...60 4.7.9 System Log...60 Appendix A: Application Example 62 Appendix B: Factory Defaults 65 Appendix C: Troubleshooting 66 Appendix D: Specifications 67 Appendix E: Glossary 68 - TP-Link TL-WA701ND | User Guide - Page 8
Package Contents TL-WA701ND 150Mbps Wireless Lite N Access Point Resource CD, including: z This User Guide z Other Helpful Information Power Adapter for TL-WA701ND 150Mbps Wireless Lite N Access Point Power Injectors Ethernet Cables Quick Installation Guide PoE Guide ) Note: Make sure that the - TP-Link TL-WA701ND | User Guide - Page 9
Overview of This Guide Package Contents: Tells what are contained in the box. Chapter 1 Introduction: Gives an introduction for the TL-WA701ND 150Mbps Wireless Lite N Access Point. 1.1 Product Overview: Introduces advantages of using this AP. 1.2 Main Feature: Introduces main features and - TP-Link TL-WA701ND | User Guide - Page 10
, the TL-WA701ND 150Mbps Wireless Lite N Access Point delivers complete data privacy. It supports an easy, web-based setup for installation and management. Even though you may not be familiar with the Access Point, you can easily configure it with the help of this Guide. Before installing the AP - TP-Link TL-WA701ND | User Guide - Page 11
devices z Repeater（Universal Repeater） Relays signal between its stations and the root AP for greater wireless range z Bridge (Point to Point, Point to Bridges the AP and another AP also in bridge Multi-point) mode to connect two or more wired LANs Supports Firmware Upgrade Supports Remote and - TP-Link TL-WA701ND | User Guide - Page 12
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 1.3 Appearance 1.3.1 The Front Panel Figure 1-1 The front panel of the TL-WA701ND consists of several LED indicators, which is designed to indicate connections. View from left to right, Table 1-1 describes the LEDs on the front panel of - TP-Link TL-WA701ND | User Guide - Page 13
the TL-WA701ND 150Mbps Wireless Lite N Access Point. LAN: One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router. RESET: The Reset button is used to restore the AP's factory default settings. There are two ways to reset the Access Point's factory defaults: z Method - TP-Link TL-WA701ND | User Guide - Page 14
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Chapter 2 Hardware Installation 2.1 Before You Begin Please read this User Guide carefully before installing and using the equipment. The operating distance range of your wireless connection can vary significantly depending on the physical - TP-Link TL-WA701ND | User Guide - Page 15
is usually near the center of the area in which your PC(s) will wirelessly connect. 3. Adjust the direction of the antenna. Normally, upright is a good direction. 4. Connect the Ethernet Broadband Router to the TL-WA701ND Access Point. Power on the AP. 5. Then you can connect a desktop PC or laptop - TP-Link TL-WA701ND | User Guide - Page 16
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Chapter 3 Configure the PC This chapter will guide you to configure your PC to communicate with the AP. The wireless adapter-equipped computers in your network must be in the same IP Address range without overlap with each other. Manually - TP-Link TL-WA701ND | User Guide - Page 17
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 3-2 3. In the General tab of Internet Protocol (TCP/IP) Properties window, highlight Internet Protocol (TCP/IP) and click Properties. Figure 3-3 10 - TP-Link TL-WA701ND | User Guide - Page 18
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 4. Configure the IP address manually. 1) Select Use the following IP address. 2) Enter 192.168.1.* (* is any integer between 1 to 253) into the IP address filed, 255.255.255.0 into the Subnet mask filed. 3) Click OK to keep your settings. - TP-Link TL-WA701ND | User Guide - Page 19
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide If the result displayed link to on the device and the LED on your PC's adapter should be lit up. b) Make sure the TCP/IP for your PC is right configured. If the AP's IP address is 192.168.1.254, your PC's IP address must be within the range - TP-Link TL-WA701ND | User Guide - Page 20
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Chapter 4 Configure the Device This Chapter describes how to configure your Access Point via the web-based management page. The TL-WA701ND 150Mbps Wireless Lite N Access Point is easy to configure and manage with the Web-based (Internet - TP-Link TL-WA701ND | User Guide - Page 21
. TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-3 Device Status ¾ Firmware Version - This field displays the current firmware version of the AP. ¾ Hardware Version - This field displays the current hardware version of the AP ¾ Wired - This field displays the current settings - TP-Link TL-WA701ND | User Guide - Page 22
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide ) Note: If you select Client mode in Figure 4-10, the wireless status in Figure 4-3 will change, similar to the figure below: 4.3 QSS QSS (Quick Secure Setup) can help you to quickly and securely connect to a network. This section will guide - TP-Link TL-WA701ND | User Guide - Page 23
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide To add a new device: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and device using either Push Button Configuration (PBC) method or PIN method. ) Note: To - TP-Link TL-WA701ND | User Guide - Page 24
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Step 2: For the configuration of the wireless adapter, please choose "Push the button on my access point" in the configuration utility of the QSS as below, and click Next. The QSS Configuration Screen of Wireless Adapter Step 3: Wait for a - TP-Link TL-WA701ND | User Guide - Page 25
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Method Three: Step 1: Keep the default QSS configuration of the wireless adapter, please choose "Push the button on my access point" in the configuration utility of the QSS as below, and click Next. The QSS Configuration Screen of Wireless - TP-Link TL-WA701ND | User Guide - Page 26
Wireless Lite N Access Point User Guide The QSS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my AP Step 1: Keep the default - TP-Link TL-WA701ND | User Guide - Page 27
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide ) Note: The QSS Configuration Screen of Wireless Adapter In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method Two: Enter the PIN from my AP Step 1: Get the Current PIN - TP-Link TL-WA701ND | User Guide - Page 28
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide ) Note: The default PIN code of the AP can be found in its label or the QSS configuration screen as Figure 4-4. You will see the following screen when the new device has successfully connected to the network. ) Note: a. The QSS LED on the - TP-Link TL-WA701ND | User Guide - Page 29
(Figure 4-8).This page allows you to configure the wireless mode for your device. Six operation modes are supported here, including Access Point, Multi-SSID, Client, Repeater, Universal Repeater and Bridge with AP. The available setting options for each operation mode are different from those of the - TP-Link TL-WA701ND | User Guide - Page 30
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 1) Access Point: This mode allows wireless stations to access this device. Figure 4-8 Wireless Settings in Access Point mode ¾ SSID (Set Service Identifier) - Identifies your wireless network name. Create a name up to 32 characters and make - TP-Link TL-WA701ND | User Guide - Page 31
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide option. ¾ Channel - Determines the operating frequency to be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. ¾ Mode - Select the desired wireless mode. The - TP-Link TL-WA701ND | User Guide - Page 32
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 2) Multi-SSID: This mode allows the device to support up to 4 SSIDs. Figure 4-9 Wireless Settings in Multi-SSID mode ¾ Enable VLAN - Check this box and then you can change the VLANID of each SSID. If you want to configure the Guest and - TP-Link TL-WA701ND | User Guide - Page 33
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide When you select your local region from wireless channel unless you notice interference problems with another nearby access point. ¾ Mode - This field determines the wireless mode which the device works on. • 11b only - Only 802.11b wireless - TP-Link TL-WA701ND | User Guide - Page 34
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 3) Client: This mode allows the device to act as a wireless station to enable wired host(s) to access an AP. Figure 4-10 Wireless Settings in Client mode ¾ Enable WDS - The client can connect to AP with WDS enabled or disabled. If WDS is - TP-Link TL-WA701ND | User Guide - Page 35
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide ) Note: Limited by local law regulations, version for North America does not have region selection option. ¾ Channel Width - Determines the channel width to be used. It is unnecessary to change the default value unless required. ¾ Enable - TP-Link TL-WA701ND | User Guide - Page 36
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide When you select your local region from the pull- check box to allow or deny wireless stations to access the device. Click the Search button to detect the SSIDs in the local area. ) Note: To apply any settings you have altered on the page, - TP-Link TL-WA701ND | User Guide - Page 37
Lite N Access Point User Guide 5) Universal Repeater: This mode allows the AP with its own BSS to relay data to a root AP to which it is associated with WDS disabled. The wireless repeater relays signal between its stations and the root AP for greater wireless range. Figure 4-12 Wireless Settings - TP-Link TL-WA701ND | User Guide - Page 38
in bridge mode to connect two or more wired LANs. Figure 4-13 Wireless Settings in Repeater mode ¾ SSID (Set Service Identifier) - Identifies your wireless network name. Create a name up to 32 characters and make sure all wireless points in the wireless network with the same SSID. The default SSID - TP-Link TL-WA701ND | User Guide - Page 39
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide ¾ Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the device can be used. It may be illegal to use the wireless function of the device in a region other than one of those - TP-Link TL-WA701ND | User Guide - Page 40
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide wireless network to protect your data from intruders. The AP provides three security types: WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK. Wireless security can be set on the following screen shown as Figure 4-14. The security options are different for - TP-Link TL-WA701ND | User Guide - Page 41
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 2) Shared Key - Select 802.11 Shared Key authentication type. 3) Open System - Select 802.11 Open System authentication. • WEP Key Format - You can select ASCII or - TP-Link TL-WA701ND | User Guide - Page 42
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide • Encryption - When you settings on this page. ) Note: You will be reminded to reboot the device after clicking the Save button. 2) Multi-SSID Figure 4-15 Wireless Security - Multi-SSID ¾ Operation Mode - Shows the current operation mode - TP-Link TL-WA701ND | User Guide - Page 43
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 1) Automatic - Select WPA or WPA2 automatically based on the wireless station's capability and request. 2) WPA - Wi-Fi Protected Access. 3) WPA2 - WPA version 2. • Encryption - You can select either Automatic, TKIP or AES. • Radius Server IP - TP-Link TL-WA701ND | User Guide - Page 44
3) Client TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-16 Wireless Security - Client ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security. If disabled, the wireless stations will be able to connect - TP-Link TL-WA701ND | User Guide - Page 45
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide • Key Type - You can select the WEP key zero key is not permitted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. - TP-Link TL-WA701ND | User Guide - Page 46
4) Repeater TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-17 Wireless Security - Repeater ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security. If disabled, the wireless stations will be able to - TP-Link TL-WA701ND | User Guide - Page 47
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide • Key Type - You can select the WEP key zero key is not permitted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. - TP-Link TL-WA701ND | User Guide - Page 48
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 5) Universal Repeater Figure 4-18 Wireless Security - Universal Repeater ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security. If disabled, the wireless stations - TP-Link TL-WA701ND | User Guide - Page 49
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide • Key Type - You can select the WEP key zero key is not permitted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. - TP-Link TL-WA701ND | User Guide - Page 50
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 6) Bridge with AP Figure 4-19 Wireless Security - Universal Repeater ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security. If disabled, the wireless stations will - TP-Link TL-WA701ND | User Guide - Page 51
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide • Key Type - You can select the WEP key length (64 is set to Client. As the configuration is the same in each operation mode, here we just take the Access Point for example. Figure 4-20 Wireless MAC address Filtering The Wireless MAC - TP-Link TL-WA701ND | User Guide - Page 52
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide ¾ Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering. The default setting is disabled. To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify Wireless MAC - TP-Link TL-WA701ND | User Guide - Page 53
wireless stations can access the device. 4.5.4 Wireless Advanced Selecting Wireless > Wireless Advanced will allow you to do some advanced settings for the device in the following screen shown in Figure 4-22. As the configuration for each operation mode is almost the same, we take Access Point mode - TP-Link TL-WA701ND | User Guide - Page 54
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-22 Wireless Advanced ¾ Operation Mode - Shows the current Operation Mode. ¾ Tx Power - Specifies the transmit power of the device. You can select High, Middle or Low which you would like. High is the default setting and is - TP-Link TL-WA701ND | User Guide - Page 55
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 4.5.5 Throughput Monitor Selecting Wireless > Throughput Monitor will helps to watch wireless throughput information in the following screen shown in Figure 4-23. Figure 4-23 Throughput Monitor ¾ Rate - The Throughput unit. ¾ Run Time - How - TP-Link TL-WA701ND | User Guide - Page 56
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-24 Statistics of the device attached wireless stations ¾ Operation Mode - Shows the current operation mode. If Multi-SSID is selected, all connected wireless stations will be shown here ¾ MAC Address - Shows the connected wireless - TP-Link TL-WA701ND | User Guide - Page 57
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 4.6.1 DHCP Settings Selecting DHCP > DHCP Settings will enable you to set up the AP as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to the system on the LAN. - TP-Link TL-WA701ND | User Guide - Page 58
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Click Save to save the changes. ) Note: 1 When the device is working on Dynamic IP mode, the DHCP Server function will be disabled. 2 To use the DHCP server function of the device, you should configure all computers in the LAN as "Obtain an - TP-Link TL-WA701ND | User Guide - Page 59
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-28 Address Reservation ¾ MAC Address - Here displays the MAC address of the PC for which you want to reserve an IP address. ¾ Reserved IP Address - Here displays the IP address that the AP is reserved. ¾ Status - Here shows whether - TP-Link TL-WA701ND | User Guide - Page 60
150Mbps Wireless Lite N Access Point User Guide There are nine submenus under the System Tools menu (shown as Figure 4-29): SNMP, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Ping Watch Dog, Reboot, Password, and System Log. Clicking any of them will enable you to configure - TP-Link TL-WA701ND | User Guide - Page 61
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide ¾ SNMP Agent - Select the radio button before Enable will enable this function if you want to have remote control through SNMPv1/v2 agent with MIB-II. Select the radio button before Disable will disable this function. The default setting is - TP-Link TL-WA701ND | User Guide - Page 62
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-31 Diagnostic Diagnostic Tools - Click the radio button to select one diagnostic tool • Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway by using the Internet - TP-Link TL-WA701ND | User Guide - Page 63
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide the Echo Reply message returned by the of data bytes to be sent. The default is 64. Ping Timeout - Specifies the time to wait for a response in milliseconds. The default is 800. Traceroute Max TTL - Set the maximum number of hops (max TTL - TP-Link TL-WA701ND | User Guide - Page 64
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-33 Firmware Upgrade New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. ¾ Firmware Version - Here displays the current firmware version. ¾ Hardware Version - Here displays the current hardware - TP-Link TL-WA701ND | User Guide - Page 65
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Click Restore to reset all configuration settings to their default values. • Default User Name: admin • Default Password: admin • Default IP Address: 192.168.1.254 • Default Subnet Mask: 255.255.255.0 ) Note: Any settings you have saved will - TP-Link TL-WA701ND | User Guide - Page 66
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-36 Ping Watch Dog Utility ¾ Enable - Turn on/off Ping Watch Dog. ¾ IP Address - The IP address of the target host where the Ping Watch Dog Utility is sending ping packets. ¾ Interval - Time internal between two ping packets which - TP-Link TL-WA701ND | User Guide - Page 67
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide • Upgrade the firmware of the device (system will reboot automatically). • Restore the device's settings to factory defaults (system will reboot automatically). • Update the configuration with a file (system will reboot automatically). 4.7.8 - TP-Link TL-WA701ND | User Guide - Page 68
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Figure 4-39 System Log The device can keep logs of all traffic. You can query the logs to find what happened to the device. ¾ Log - TP-Link TL-WA701ND | User Guide - Page 69
N Access Point User Guide Appendix A: Application Example The TL-WA701ND allows you to connect a wireless device to the wired network. Providing that you want to connect your computer equipped with wireless adapter to a wired network wirelessly, you can take the following instructions. 1. Configure - TP-Link TL-WA701ND | User Guide - Page 70
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 2) On the My Network Connections window, right-click Wireless Network and choose Enable to enable wireless network function. 3) Right-click the wireless connection icon " " on the screen of the PC and then select View Available Wireless - TP-Link TL-WA701ND | User Guide - Page 71
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 5) Then the following page will display, which indicates you have been successfully added to the network wirelessly. 64 - TP-Link TL-WA701ND | User Guide - Page 72
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Appendix B: Factory Defaults Item Default Value Common Default Settings Username admin Password admin IP Address 192.168.1.254 Subnet Mask 255.255.255.0 Wireless SSID TP-LINK_XXXXXX Wireless Security Disable Wireless MAC - TP-Link TL-WA701ND | User Guide - Page 73
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Appendix C: Troubleshooting 1. No LEDs are lit on the access point. It takes a few seconds for the Power LED to light up. Wait a minute and check the status of Power LED. If there the LED is - TP-Link TL-WA701ND | User Guide - Page 74
Lite N Access Point User Guide Appendix D: Specifications General Standards and Protocols IEEE 802.3, 802.3u, 802.11n, 802.11b and 802.11g, TCP/IP, DHCP Safety & Emission FCC、CE Ports Cabling Type Wireless Frequency Band Radio Data Rate One 10/100M Auto-Negotiation LAN RJ45 port, supporting - TP-Link TL-WA701ND | User Guide - Page 75
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide Appendix E: Glossary 802.11b - The 802.11b standard specifies a wireless wireless devices. Access points can also bridge to each other. DNS (Domain Name System) - An Internet Service that translates the names of websites into IP addresses - TP-Link TL-WA701ND | User Guide - Page 76
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide provides an authentication alternative to an expensive RADIUS server. WPA-PSK is a simplified but still powerful form of WPA most suitable for home Wi-Fi networking. To use WPA-PSK, a person sets a static key or "passphrase" as with WEP. But
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
TL-WA701ND
150Mbps Wireless Lite N Access Point
Rev: 2.0.1
1910010272