TP-Link TL-WA901ND User Guide - Page 13

The Rear Panel, TL-WA901ND, Wireless antenna, POWER, RESET, Method one, System Tools - 300mbps

Get TP-Link TL-WA901ND PDF manuals and user guides
UPC - 845973051426
View all TP-Link TL-WA901ND manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

1.3.2 The Rear Panel TL-WA901ND Wireless N Access Point User Guide Figure 1-2 Viewed from left to right, the following parts are located on the rear panel of TL-WA901ND. Wireless antenna：The external antenna is used to transmit and receive wireless data. POWER: The power port connects to the power adapter provided with the TL-WA901ND 300Mbps Wireless N Access Point. LAN: One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router. RESET: The Reset button is used to restore the AP's factory default settings. There are two ways to reset the Access Point's factory defaults: z Method one: With the AP powered on, use a pin to press and hold the Reset button (about 5 seconds) until the System LED becomes quick-flash from slow-flash. And then release the button and wait the router to reboot to its factory default settings. z Method two: Restore the default settings from "System Tools > Factory Defaults" of the Modem's Web-based management page. ) Note: Ensure the AP is powered on before it restarts completely. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
TL-WA901ND
Wireless N Access Point User Guide
1.3.2 The Rear Panel
Figure 1-2
Viewed from left to right, the following parts are located on the rear panel of TL-WA901ND.
Wireless antenna
：
The external antenna is used to transmit and receive wireless data.
POWER:
The power port connects to the power adapter provided with the TL-WA901ND
300Mbps Wireless N Access Point.
LAN:
One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router.
RESET:
The Reset button is used to restore the AP’s factory default settings. There are two ways
to reset the Access Point’s factory defaults:
z
Method one:
With the AP powered on, use a pin to press and hold the Reset button (about 5
seconds) until the System LED becomes quick-flash from slow-flash. And then release the
button and wait the router to reboot to its factory default settings.
z
Method two:
Restore the default settings from “
System Tools
>
Factory Defaults
” of the
Modem's Web-based management page.
)
Note:
Ensure the AP is powered on before it restarts completely.
6