TP-Link TL-WR1043N TL-WR1043NEU V5 Quick Installation Guide
TP-Link TL-WR1043N Manual
View all TP-Link TL-WR1043N manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-WR1043N manual content summary:
- TP-Link TL-WR1043N | TL-WR1043NEU V5 Quick Installation Guide - Page 1
Quick Installation Guide 450Mbps Wireless N Gigabit Router TL-WR1043N Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the - TP-Link TL-WR1043N | TL-WR1043NEU V5 Quick Installation Guide - Page 2
TP-Link router supports various features, such as Guest Network, Parental Controls, Access Control and more. You can log in to the router's web management page http://tplinkwifi.net to apply these functions. For instructions, please refer to the User Manual at www.tp-link Internet Service Provider.
Modem
Power adapter
Power adapter
Router
Internet
Quick Installation Guide
450Mbps Wireless N Gigabit Router
Connect the Hardware
Turn on the modem, and
then wait about
2 minutes
for it to restart.
If your internet connection is through an Ethernet cable directly from the
wall instead of through a DSL / Cable / Satellite modem, connect the
Ethernet cable to the router’s Internet port, and follow Step 4 and 5 to
complete the hardware connection.
Turn off the modem,
and remove the backup
battery if it has one.
1
3
Connect the Power
adapter to the router and
turn on the router.
4
2
TL-WR1043N
Connect the modem to the
router’s Internet port with
an Ethernet cable.
Verify that the following LEDs
are on and solid to confirm the
hardware is connected correctly.
5
Note: If the Wi-Fi LED
is not on, please
press and hold the Wi-Fi/WPS button on
the rear panel for about 3 seconds to turn
it on.
Wi-Fi
On
On
Internet
Power
On