TP-Link TL-WR740N User Guide - Page 12
The Rear Panel, TL-WR740N/TL-WR741ND, Wireless antenna, POWER, ON/OFF - 150mbps
UPC - 813120016543
View all TP-Link TL-WR740N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1.4.2 The Rear Panel TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View right to left). ¾ Wireless antenna: To receive and transmit the wireless data. ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR740N/TL-WR741ND 150Mbps Wireless N Router. ¾ ON/OFF: The switch for the power. ¾ 4,3,2,1 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s). ¾ WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. ¾ RESET: There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on "System Tools → Factory Defaults" page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: With the Router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings. - 5 -