TP-Link TL-WR802N TL-WR802NUS V4 Quick Installation Guide
TP-Link TL-WR802N Manual
 |
View all TP-Link TL-WR802N manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-WR802N manual content summary:
- TP-Link TL-WR802N | TL-WR802NUS V4 Quick Installation Guide - Page 1
to complete the configuration. If you have changed the default Wi-Fi name and password, please reconnect your wireless devices to the new one. Other Information Ports and LED: 300Mbps TL-WR802N Power Reset LED LED Status Solid Blinking Indication The router is connected to the host Wi-Fi network - TP-Link TL-WR802N | TL-WR802NUS V4 Quick Installation Guide - Page 2
you authenticate for the service or purchase the internet access. • If your internet access is still unavailable, contact TP-Link Technical Support. Q2. How do I restore the router to its factory default settings? • With the router powered on, use a pin to press and hold the Reset button for about
-
1 -
2
 |
 |
Wireless N Nano Router
TL-WR802N
Quick Installation Guide
Other Information
1
Connect the router according to Step
A
to
C
in the left diagram.
2
Use the default Wi-Fi name (SSID) and password printed on the Wi-Fi Info Card or
on the product label at the bottom of your router to connect to the Wi-Fi.
Check the internet connection on your laptop or smartphone, and please note that:
-
If you can access the internet without any restriction, no other configuration is required.
-
If you're redirected to an authentication page, please complete the following steps to access the internet.
3
Launch a web browser and type
http://tplinkwifi.net
in the address bar. Create a
password to log in.
4
Click
Next
to start the Quick Setup. Select
Wireless Router
and click
Next
.
5
Select the
WAN Connection Type
and follow the step-by-step instructions to
configure the parameters. When using the router in a hotel room or a small office,
please select
Dynamic IP
.
6
On the
Wireless
page, either keep the default
Wireless Network Name
and
Wireless Password
or customize them, and then click
Next
.
7
Click
Save
to complete the configuration.
1
Connect the router according to Step
A
to
B
in the left diagram.
2
Use the default Wi-Fi name (SSID) and password printed on the Wi-Fi Info Card or
on the product label at the bottom of your router to connect to the Wi-Fi.
3
Launch a web browser and type
http://tplinkwifi.net
in the address bar. Create a
password to log in.
4
Click
Next
to start the Quick Setup. Select
WISP
and click
Next
.
5
Select the
WAN Connection Type
and follow the step-by-step instructions to
configure the parameters. When using the router in a hotel room or a small office,
please select
Dynamic IP
.
6
Select the public Wi-Fi that you want to connect to, and click
Next
.
7
Type in the public Wi-Fi’s password. In the
AP Setting
section, customize your Wi-Fi
network name and password, then click
Next
.
8
Click
Finish
to complete the configuration.
Wireless Router
WISP (Hotspot)
Range Extender
Client
Access Point
To share a wired (Ethernet) connection to wireless devices, such as in a hotel room, small office and so on.
To create your personal Wi-Fi hotspot from a public Wi-Fi network such as in a hotel room, on a trade show and
so on.
To extend the range of an existing Wi-Fi network.
To enable your wired device (such as Blu-ray® players, smart TVs, or game consoles) to connect to a Wi-Fi
network.
To transform an existing wired (Ethernet) network to a Wi-Fi network.
Travel
Home
•
Wi-Fi Info Card:
•
Product Label:
Description
Port
This port functions as the WAN port in Wireless Router mode and
as the LAN port in WISP, Range Extender and Client modes.
This port is for connecting to the existing router in Access Point
mode.
Power
LAN/WAN
Connect to a USB charger, power adapter or computer USB port
via the USB cable for power supply.
Reset
Use a pin to press and hold the Reset button until the LED blinks.
Indication
LED Status
Solid
The router is connected to the host Wi-Fi network or internet.
Blinking
Blinking steadily: The router is disconnected from the host Wi-Fi
network or internet.
Blinking irregularly: The router is booting or updating firmware.
Ports and LED:
Using Amazon Fire TV Stick or Chromecast
when traveling:
Find default Wi-Fi name (SSID) and
password on:
Connect your laptops, smartphones or tablets
to the router.
Plug the HDMI streaming stick directly into the
hotel TV.
Follow the on-screen instruction to connect to
the router’s Wi-Fi.
Enjoy streaming content on the TV.
TV
TV
LED
Wireless Router (Default)
WISP (Hotspot)
If you have changed the default Wi-Fi name and password, please reconnect your
wireless devices to the new one.
If you have changed the default Wi-Fi name and password, please reconnect your
wireless devices to the new one.
Operation Mode
Operation Mode
Application
Scene
During Travel
300Mbps TL-WR802N
Internet
B
C
A
Public Wi-Fi
A
B
7106508826
REV4.1.1
Wi-Fi Name(SSID): TP-Link_XXXX
Wi-Fi Password/PIN: XXXXXXXX
SSID:TP-Link_XXXX
XXXXXXXX
Wireless
Password
/PIN
Power
Reset