TP-Link TL-WR841HP TL-WR841HP V1 QIG 7106504243
TP-Link TL-WR841HP Manual
 |
View all TP-Link TL-WR841HP manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-WR841HP manual content summary:
- TP-Link TL-WR841HP | TL-WR841HP V1 QIG 7106504243 - Page 1
on this page. The default wireless name is TP-LINK_XXXXXX. Click NEXT to continue. 2 Select TL-WR841HP and click Easy Setup Assistant. 7106504243 REV1.0.0 4 After the connectivity is checked successfully, please click NEXT. 6 If you are utilizing a cable modem to access the Internet, you may - TP-Link TL-WR841HP | TL-WR841HP V1 QIG 7106504243 - Page 2
POWER RESET 4 3 2 1 INTERNET POWER Technical Support For more troubleshooting help, go to www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to http://www.tp-link.com/en/support/download/ For all other technical support, please contact
-
1 -
2
 |
 |
Hardware Connection
1
Quick Installation Guide
300Mbps High Power Router
MODEL NO.
TL-WR841HP
Configuration for Windows with Setup Wizard
2
7106504243
REV1.0.0
Package Contents
QIG
300Mbps High Power Router
TL-WR841HP
Resource CD
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
3
After confirming the hardware connection and the status
of LEDs, please click
NEXT
to continue.
4
After the connectivity is checked successfully, please click
NEXT
.
5
Select the connection type your ISP provides and click
NEXT
.
Here we take
Dynamic IP
for example.
7
You can rename your wireless network on this page.
The default wireless name is TP-LINK_XXXXXX.
Click
NEXT
to continue.
8
You are recommended to select
Most Security
(WPA2-PSK)
to secure your wireless network.
6
If you are utilizing a cable modem to access the Internet,
you may need to clone your MAC address.
Ethernet Cable
TL-WR841HP
Power Adapter
If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to
Appendix 1
for configuration.
(To be continued)
Connect the
INTERNET
port on your router to the modem’s
LAN
port with an Ethernet cable.
Connect your computer to one of the
ETHERNET
ports labeled
1~4
on the router with an Ethernet cable.
Plug the provided power adapter into the
POWER
jack on the back of the router and the other end to a standard electrical wall socket.
1
2
3
Power off your modem.
4
5
Power on the modem and wait for one minute .
The default wireless
password, the same
as the PIN code, is
printed on the label
at the bottom of the
Router.
The Router is
pre-encrypted.
2
3
Cable/DSL Modem
4
Wall Socket
Internet
5
Wall Socket
WPS/
RESET
1
2
3
4
POWER
INTERNET
2
Select
TL-WR841HP
and click
Easy Setup Assistant
.