TP-Link TL-WR843ND TL-WR843ND V1 QIG 7106503962
TP-Link TL-WR843ND Manual
 |
View all TP-Link TL-WR843ND manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-WR843ND manual content summary:
- TP-Link TL-WR843ND | TL-WR843ND V1 QIG 7106503962 - Page 1
Guide 300Mbps Wireless AP/Client Router Package Contents 3 4 TL-WR843ND 300Mbps Wireless AP/Client Router MODEL NO. TL-WR843ND QIG 1 Hardware Connection Here we take the Client Router (WISP)Ḥmode for example. If you want to achieve other applications, please refer to the User Guide - TP-Link TL-WR843ND | TL-WR843ND V1 QIG 7106503962 - Page 2
Reset the Router rst and then use the default user name and password: admin, admin. Technical Support For more troubleshooting help, go to http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to http://www.tp-link.com/en/support/download For all
-
1 -
2
 |
 |
Hardware Connection
1
Quick Installation Guide
300Mbps Wireless AP/Client Router
MODEL NO.
TL-WR843ND
Configuration for Windows with Setup Wizard
2
7106503962
Package Contents
Resource CD
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select
TL-WR843ND
and click
Easy Setup Assistant
.
3
Click
START
to start the configuration.
4
Connect the Router to your computer and power on
the Router. Click
NEXT
.
5
Turn the work mode switch to
WISP
. Click
NEXT
to continue.
7
8
6
Ethernet Cable
TL-WR843ND
Power Adapter
If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to
Appendix 1
for configuration.
(To be continued)
Passive PoE Injector
QIG
300Mbps Wireless AP/Client Router
TL-WR843ND
1
Please confirm the work mode switch is in
WISP
mode.
Connect your computer to the
LAN
port of your Router with an Ethernet Cable.
2
3
1. You are recommended to place the Router away from electrical devices, such as ceiling fans, home security systems,
microwave and the base for a cordless phone.
2. If the distance between the outlet and the Router is too long to supply power, you can set up the hardware connection with the
provided Passive PoE Injector.
WISP Signal
Plug one end of the provided power adapter into the
POWER
jack of the Router, and the other end to a standard electrical
wall socket. Then press the ON/OFF button of the Router.
Here we take the
Client Router
(
WISP
)
mode for example. If you want to achieve other applications, please refer to the User Guide on the
resource CD.
ROUTER
WISP
WPS/
RESET
INTERNET
Enter the password of your wireless network. Sometimes
it may be provided by your WISP. Cllick
NEXT
.
Select the connection type your ISP provides and click
NEXT
.
Here we take
Dynamic IP
for example.
After confirming the hardware connection and the status
of LEDs, please select the target wireless network you want
to join. You can also set it mannually. Click
NEXT
.
TL-WR843ND