TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide

TP-Link TL-WR902AC Manual

Get TP-Link TL-WR902AC PDF manuals and user guides View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link TL-WR902AC manual content summary:

  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 1
    User Guide AC750 Wi-Fi Travel Router TL-WR902AC REV3.0.0 1910012191
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 2
    Quick Setup Wizard 9 3. 1. Log In to the Router 10 3. 2. Configure the Router 10 3. 2. 1.Standard Wireless Router Mode 10 3. 2. 2.Access Point Mode 12 3. 2. 3.Range Extender Mode 13 3. 2. 4.Client Mode 14 3. 2. 5.Hotspot Router Mode 15 Chapter 4. Configure the Router in Wireless Router Mode
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 3
    Wireless Advanced 36 4. 3. 6.Wireless Statistics 38 4. 4. Guest Network 38 4. 5. DHCP 39 4. 5. 1.DHCP Settings 40 4. 5. 2.DHCP Client List 40 4. 5. 3.Address Reservation 41 4. 6. USB 4. 16. 1.Time Settings 72 4. 16. 2.Diagnostic 73 4. 16. 3.Firmware Upgrade 74 4. 16. 4.Factory Defaults 74
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 4
    the Router in Access Point Mode 79 5. 1. Status 80 5. 2. Operation Mode 81 5. 3. Network 81 5. 3. 1. LAN 81 5. 4. Wireless 82 5. 4. 1.Basic Settings 82 5. 4. 2. WPS 83 5. 4. 3.Wireless Security 85 5. 4. 4.Wireless MAC Filtering 86 5. 4. 5.Wireless Advanced 87 5. 4. 6.Wireless Statistics
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 5
    2.Firmware Upgrade 125 6. 7. 3.Factory Defaults 126 6. 7. 4.Backup & Restore 126 6. 7. 5.Reboot 127 6. 7. 6.Password 127 6. 7. 7.System Log 128 6. 8. Log Out 129 Chapter 7. Configure the Router in Client Mode 130 7. 1. Status 131 7. 2. Operation Mode 132 7. 3. Network 132 7. 4. Wireless
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 6
    the Router in Hotspot Router Mode 149 8. 1. Status 150 8. 2. Network 151 8. 2. 1. WAN 151 8. 2. 2. LAN 158 8. 2. 3.MAC Clone 159 8. 3. Wireless 160 8. 3. 1.Basic Settings 160 8. 3. 2. WPS 161 8. 3. 3.Wireless Security 163 8. 3. 4.Wireless MAC Filtering 164 8. 3. 5.Wireless Advanced
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 7
    195 8. 13. 2.ARP List 196 8. 14. Dynamic DNS 196 8. 15. System Tools 199 8. 15. 1.Time Settings 199 8. 15. 2.Diagnostic 200 8. 15. 3.Firmware Upgrade 201 8. 15. 4.Factory Defaults 201 8. 15. 5.Backup & Restore 202 8. 15. 6.Reboot 202 8. 15. 7.Password 203 8. 15. 8.System Log 203 8. 15
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 8
    from the Download Center at https://www.tp-link.com/support. The Quick Installation Guide can be found where you find this guide or inside the package of the router. Specifications can be found on the product page at https://www.tp-link.com. A TP-Link Community is provided for you to discuss
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 9
    Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It contains the following sections: • Product Overview • Appearance
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 10
    Chapter 1 Get to Know About Your Router 1. 1. Product Overview To meet the wireless needs of almost any situation you might encounter, the TP-Link portable router, with multiple operating modes, is designed for home and travel use. The portable size of the router means that you can put it in your
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 11
    the WAN port in Router mode and as the LAN port in Hotspot, Access Point, Range Extender and Client mode. Power The port is used to connect the power adapter. 3G/4G USB This port is used to plug a 3G/4G modem or a USB disk into. * 3G/4G modem is only supported in some regions. (WPS
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 12
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 13
    Router There are five operating modes supported by this router: Standard Wireless Router, Access Point, Range Extender, Client and Hotspot Router. to D. 2. Connect your device to the router wirelessly. The Wi-Fi network name and password are on the router's label. Note: If the hotel's internet has
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 14
    mode to AP/Rng Ext/Client and connect the hardware according to Step A to D. 2. Connect your device to the router wirelessly. The Wi-Fi network name and password are on the router's label. Note: If the hotel's internet has an authentication process, you will need to authenticate it on EACH device
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 15
    2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi network name and password are on the router's label. Internet Host AP A B OR OR Smart TV Desktop Other Device 2. 2. 5. Hotspot Router Mode In Hotspot Router mode, the router enables multiple users to share
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 16
    Chapter 3 Set Up Internet Connection Via Quick Setup Wizard This chapter introduces how to connect your router to the internet via the web-based Quick Setup Wizard. It contains the following sections: • Log In to the Router • Configure the Router
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 17
    does not appear, please refer to FAQ. 3. 2. Configure the Router The Quick Setup Wizard will guide you through the process to set up your router. 3. 2. 1. Standard Wireless Router Mode 1. Select the WAN Connection Type. When using the router in a hotel room or a small office, select Dynamic IP
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 18
    Up Internet Connection Via Quick Setup Wizard 2. In this case, we take Dynamic IP for instance. Please select to clone the mac address or not and click Next. For other connection types, please enter the parameters provided by your ISP, and then click Next. 3. Select the wireless band you want to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 19
    Up Internet Connection Via Quick Setup Wizard 5. Click Save to apply the settings. 3. 2. 2. Access Point Mode 1. Select Access Point for the operation mode of the router. 2. Either customize your Wireless Network Name and Wireless Password for the 2.4GHz/5GHz wireless network or keep the default
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 20
    Quick Setup Wizard 4. Click Finish to apply the settings. 3. 2. 3. Range Extender Mode 1. Select Range Extender for the operation mode of the router. 2. Click Connect to connect to the host network in the AP List page. 3. Enter the password of the host network and then either copy the Wireless Name
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 21
    Next. 5. Click Finish to apply the settings. 6. Relocate the router about halfway between your host netowork and the Wi-Fi dead zone. The extended network shares the same Wi-Fi password as that of your host network, but may have different wireless network name if you have customized it during the
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 22
    Chapter 3 Set Up Internet Connection Via Quick Setup Wizard 3. Enter the password of the host network. 4. Select the LAN IP type of the router or leave the default settings Smart IP for most cases, and then click Next. 5. Click Finish to apply the settings. Now connect your wired-only
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 23
    Chapter 3 Set Up Internet Connection Via Quick Setup Wizard 2. Click Connect to connect to the public Wi-Fi in the AP List page. 3. Enter the password of the public Wi-Fi in the Password field of the Client Setting section. In the Wireless 2.4GHz/5GHz section, either customize your Local Network
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 24
    Chapter 3 Set Up Internet Connection Via Quick Setup Wizard 4. Click Finish to apply the settings. 17
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 25
    chapter presents how to configure the various features of the router working as a standard wireless router. It contains the following sections: • Status • Network • Wireless • Guest Network • DHCP • USB Settings • Port Forwarding • Security • Parental Controls • Access Control • Advanced Routing
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 26
    the Router in Wireless Router Mode 4. 1. Status 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Status. You can view the current status information of the router. • Firmware Version - The version information of the router's firmware
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 27
    displays the basic information or status of the wireless function, and you can configure them on the Wireless 2.4GHz/5GHz > Basic Settings page. • Operation Mode - The current operation mode of the router. • Wireless Radio - Indicates whether the wireless feature is enabled or not. • Name (SSID
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 28
    by your ISP. • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. • Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast applications. If you cannot get the IP address normally, you can choose this
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 29
    Chapter 4 Configure the Router in Wireless Router Mode • IP Address - Enter the IP address in dotted-decimal notation . • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. PPPoE/Russia PPPoE If your ISP provides PPPoE connection, select
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 30
    Configure the Router in Wireless Router Mode • • Connect manually - You can click Connect/Disconnect to connect/disconnect immediately. This mode also supports the Max some advanced configurations, please click Advanced. • Service Name/Server Name - The service name and server name should not be
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 31
    Chapter 4 Configure the Router in Wireless Router Mode • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. • Use IP address specified by ISP - If your ISP does not automatically assign IP addresses to the router, please select
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 32
    Chapter 4 Configure the Router in Wireless Router Mode your internet connection active all the time, please enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your internet access disconnects. • Connect manually - You can click Connect/
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 33
    Chapter 4 Configure the Router in Wireless Router Mode • MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you change the default MTU size unless required by your ISP. • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 34
    insert a 3G/4G USB modem into the 3G/4G USB port of the router. There is already much 3G/4G USB modem information embedded in th router. The USB modem parameters will be set automatically if the SIM/UIM card is supported by the router. Note: 3G/4G modem is only supported in some regions. 1. Visit
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 35
    Chapter 4 Configure the Router in Wireless Router Mode • Location - Please select the location where you are enjoying the 3G/4G service. • Mobile ISP - Please select the ISP providing the 3G/4G service. The router will automatically fill in the default Dial Number and APN of that ISP. • Username/
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 36
    Chapter 4 Configure the Router in Wireless Router Mode • Use the following IP Address - Select this USB modem cannot be identified by the router, please follow the steps below to have furtuer configuration. 1. Download a most recent 3G/4G USB modem configuration file from our website www.tp-link.
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 37
    Router in Wireless Router Mode • MAC Address - The physical address of the LAN ports. The value can not be changed. • IP Address - Enter the IP address in dotted-decimal notation of your router Snooping - The IGMP Snooping feature allows the router to only forward multicast traffic to ports that
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 38
    you notice interference problems with another nearby access point. • Enable SSID Broadcast - If enabled, the router will broadcast the wireless network name (SSID). 4. 3. 2. WPS WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This section will guide you to add
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 39
    ://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > WPS. 3. Follow one of the following three methods to connect your client device to the router's Wi-Fi network. Method ONE: Press the WPS Button on Your Client Device 1. Keep the WPS
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 40
    current PIN on your client device to join the router's Wi-Fi network. 4. 3. 3. Wireless Security 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless Security. 3. Configure the security settings of your 2.4GHz/5GHz
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 41
    Chapter 4 Configure the Router in Wireless Router Mode • Disable Wireless Security - The wireless security function can be enabled or disabled. If disabled, wireless clients can connect to the router without a password. It's strongly recommended to choose one of the following modes to enable
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 42
    that? 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless MAC Filtering. 3. Click Enable to enable the Wireless MAC Filtering function. 4. Select Allow the stations specified by any enabled entries in the list to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 43
    Advanced 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless Advanced. 3. Configure the advanced settings of your wireless network and click Save. Note: If you are not familiar with the setting items on this page
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 44
    for Beacon Interval here. Beacon Interval value determines the time interval of the beacons. The beacons are the packets sent by the router to synchronize a wireless network. The default value is 100. • RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 45
    client. • Received Packets - Packets received by the wireless client. • Sent Packets - Packets sent by the wireless client. • SSID - SSID that the wireless client is connected to. 4. 4. Guest Network Guest Network allows you to provide Wi-Fi access for guests without disclosing your main network
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 46
    Chapter 4 Configure the Router in Wireless Router Mode • Guest Network Isolation - If enabled, one guest can not communicate with another. • Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules will take effect. • Band Select - Select the wireless band 2.4GHz or
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 47
    Chapter 4 Configure the Router in Wireless Router Mode 4. 5. 1. DHCP Settings 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to DHCP > DHCP Settings. 3. Specify DHCP server settings and click Save. • DHCP Server - Enable or disable the DHCP
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 48
    Router in Wireless Router Mode 2. Go to DHCP > DHCP Client List to view the information of the clients connected to the router. • Client Name - The name of the DHCP client. • MAC Address - The MAC address of the DHCP client. • Assigned IP - The IP address that the router set for the router. 2. Go
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 49
    physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk By default, all the network clients can access your USB disk. Refer to the following table for access instructions. You can
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 50
    Chapter 4 Configure the Router in Wireless Router Mode 1 ) Click Go in the top left corner of the Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to USB Settings > Storage Sharing. • Server Status - the Storage Sharing's current status. •
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 51
    Chapter 4 Configure the Router in Wireless Router Mode a shared folder which does not allow for the router. 3. Go to USB Settings > FTP Server. 4. Click Enable to enable the FTP Server. 5. Click Enable to enable the internet access to the FTP server. 6. Specify a port number for the Service Port.
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 52
    FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk Locally Refer to the following table for access instructions. You can customize user accounts by
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 53
    Chapter 4 Configure the Router in Wireless Router Mode Open the Windows Explorer (or go to Computer), -party app for network files management. •• To access the USB disk remotely: Refer to the following table for access instructions. You can customize user accounts by referring to User Accounts. 46
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 54
    music and watch movies on the USB drive directly with DLNA-supported devices, such as on your computer, pad and PS2/3/4. •• To share specific folders: 1. Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 55
    is FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access the Media Files on Your USB Disk Now the DLNA-supported devices (such as your computer and pad) connected to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 56
    Chapter 4 Configure the Router in Wireless Router Mode • Go to Computer > Network, and click the Media Server Name in the Media Devices section. Note: Here we take Windows 8 as an example. Windows Tablet • Use a third-party DLNA-supported player. 4. 6. 4. User Accounts You can specify the
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 57
    problem that external hosts cannot initiatively communicate with the specified devices in the local network. With the forwarding feature, the router can traverse the isolation of NAT so that clients on the internet can reach devices on the LAN and realize some specific functions. The TP-Link router
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 58
    Port list, you can enter the corresponding parameters manually. You should verify the port number that the service needs. • You can add multiple virtual server rules if you want to provide several services in a router. Please note that the Service Port should not be overlapped. Done! Users on
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 59
    Chapter 4 Configure the Router in Wireless Router Mode 4. 7. 2. Port Triggering Port triggering can application you need is not listed in the Common Applications list, please enter the parameters manually. You should verify the incoming ports the application uses first and enter them in Incoming
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 60
    Chapter 4 Configure the Router in Wireless Router Mode Note: DMZ is more applicable in the situation playing the online games, you can log in normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ host with all ports opened. How can I do that? 1. Assign a
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 61
    Chapter 4 Configure the Router in Wireless Router Mode • Only the application supporting UPnP protocol can use this feature. • UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating system need to install the UPnP components). For
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 62
    Configure the Router in Wireless Router Mode • VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP or L2TP protocols to pass through the router use of cryptographic security services. If you want to allow IPSec tunnels to pass through the router, you can keep
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 63
    Chapter 4 Configure the Router in Wireless Router Mode into the gateway to support address and port translation for router. 2. Go to Security > Advanced Security, and you can protect the router from being attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood. • DoS Protection - Denial of Service
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 64
    for the router. 2. Go to Security > Local Management, and you can block computers in LAN from accessing the router. For example, if you want to allow PCs with specific MAC addresses to access the router's web management page locally from inside the network, please follow the instructions below: 57
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 65
    Chapter 4 Configure the Router in Wireless Router Mode 1 ) Select Only the PCs listed can browse the internet. • Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router's default remote management web port number is 80. For higher security, you can
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 66
    Chapter 4 Configure the Router in Wireless Router Mode 4. 9. Parental Controls tp-link.com on Saturday only while the parent PC with the MAC address 00:11:22:33:44:BB is without any restriction. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 67
    Chapter 4 Configure the Router in Wireless Router Mode • Enter 00-11-22-33-44-BB in the MAC Address -1 field. • Select the allowed access time. • Enter www.tp-link.com in the Add URL field and click Add. 5. Click Save. 4. 10. Access Control Access Control is used to deny or allow specific client
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 68
    Chapter 4 Configure the Router in Wireless Router Mode 1 ) Click Add New. 2 ) Select MAC Address as the the full name or the keywords (for example TP-Link) in the Add URL Address field and click Add. Note: Any domain name with keywords in it (e.g. www.tp-link.com) will be blocked or allowed. 3 )
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 69
    Chapter 4 Configure the Router in Wireless Router Mode 3 ) Click Save. 5. Go to Access Control > Rule and add a new access control rule. 1 ) Click Add New. 2 ) Give a name for the rule in the Description
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 70
    Advanced Routing Static Routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. 4. 11. 1. Static Routing
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 71
    Chapter 4 Configure the Router in Wireless Router Mode • Click Enable Selected to enable selected entries. • Click Disable Selected to disable selected entries. 4. 11. 2. System Routing Table 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 72
    Chapter 4 Configure the Router in Wireless Router Mode The values you configure for the Egress Bandwidth and Ingress Bandwidth should be less than 100,000Kbps. For optimal control of the bandwidth, please
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 73
    Chapter 4 Configure the Router in Wireless Router Mode 3. Click Save. 4. 13. IP&MAC Binding IP & Binding Settings 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to IP & MAC Binding > Binding Settings. 3. Select Enable for ARP Binding. 4.
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 74
    Chapter 4 Configure the Router in Wireless Router Mode 4. 13. 2. ARP List To manage a service provider will give you a password or key. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Dynamic DNS. Comexe DDNS If the dynamic DNS Service
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 75
    Chapter 4 Configure the Router in Wireless Router Mode To set up for DDNS, follow these instructions: 1. Enter the Domain Name received from your dynamic DNS service provider. 2. Enter the Username for your DDNS account. 3. Enter the Password for your DDNS account. 4. Click Login. 5. Click Save. •
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 76
    Chapter 4 Configure the Router in Wireless Router Mode To set up for DDNS, follow these instructions: 1. Enter the Username for your DDNS account. 2. Enter the Password for your DDNS account. 3. Enter the Domain Name you received from dynamic DNS service provider here. 4. Click Login. 5. Click
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 77
    Chapter 4 Configure the Router in Wireless Router Mode 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to IPv6 > IPv6 WAN. 3. Enable session with IPv4 connection checkbox and manually enter the username and password for the IPv6 connection. 70
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 78
    Chapter 4 Configure the Router in Wireless Router Mode 4 ) Tunnel 6to4: An IPv4 connection type is a Leased Time is the amount of time in which a network user will be allowed connection to the router with their current dynamic IPv6 address. Enter the amount of time, in hours, then the user will
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 79
    Chapter 4 Configure the Router in Wireless Router Mode 2 ) If Static is selected, • Site Prefix - Enter a the username and password you set for the router. 2. Go to System Tools > Time Settings and configure the system time as needed. •• To set time manually: 1. Select your local time zone. 2.
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 80
    you might have a name resolution problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries. • IP address/Domain name - Enter the destination IP address (such as 192.168.0.1) or Domain name (such as www.tp-link.com). • Pings Count
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 81
    the Router in Wireless Router Mode firmware at TP-Link official website. You can download the latest firmware file from the Support page of our website www.tp-link.com and upgrade the firmware to the latest version. 1. Download the latest firmware file for the router from our website www.tp-link
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 82
    4 Configure the Router in Wireless Router Mode • The default Username: admin • The default Password: admin • The default IP Address: 192.168.0.1 • The default Subnet Mask: 255.255.255.0 4. 16. 5. Backup & Restore The configuration settings are stored as a configuration file in the router. You can
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 83
    Configure the Router in Wireless Router Mode Some settings of the router will take effect only after rebooting, including: • Change the LAN IP Address (system will reboot automatically). • Change the DHCP Settings. • Change the Web Management Port. • Upgrade the firmware of the router (system will
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 84
    Chapter 4 Configure the Router in Wireless Router Mode • Refresh - Refresh the page to show the latest log list. • Clear Log - All the logs will be deleted from the router permanently, not just from the page. • Save Log - Click to save all the logs in a txt file. • Log Settings - Click to set the
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 85
    Chapter 4 Configure the Router in Wireless Router Mode • Traffic Statistics - Enable or Disable. The default value is number of packets received and transmitted by the router. Bytes The total number of bytes received and transmitted by the router. The total number of packets received and
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 86
    Chapter 5 Configure the Router in Access Point Mode This chapter presents how to configure the various features of the router working as an access point. It contains the following sections: • Status • Operation Mode • Network • Wireless • DHCP • USB Settings • System Tools • Log Out
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 87
    Go to Status. You can view the current status information of the router in Access Point Mode. • Firmware Version - The version information of the router's firmware. • Hardware Version - The version information of the router's hardware. • LAN- This field displays the current settings of the LAN, and
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 88
    field displays the basic information or status of the wireless function, and you can configure them on the Wireless 2.4GHz/5GHz > Basic Settings page. • Operation Mode - The current operation mode of the router. • Wireless Radio - Indicates whether the wireless feature is enabled or not • Name (SSID
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 89
    Router in Access Point Mode • LAN Type - Either select Smart IP(DHCP) to get IP address from DHCP server, or Static IP to configure IP address manually Wireless 5. 4. 1. Basic Settings 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 90
    you notice interference problems with another nearby access point. • Enable SSID Broadcast - If enabled, the router will broadcast the wireless network name (SSID). 5. 4. 2. WPS WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This section will guide you to add
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 91
    on the WPS page if the client device has been successfully added to the router's network. Method Three: Enter the Router's PIN 1. Keep the WPS Status as Enabled and get the Current PIN of the router. 2. Enter the router's current PIN on your client device to join the router's Wi-Fi network. 84
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 92
    in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless Security. 3. Configure the security settings of your 2.4GHz/5GHz wireless network and click Save. • Disable Wireless Security - The wireless security function can be enabled or disabled. If disabled
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 93
    or allow specific wireless client devices to access my network by their MAC addresses. For example, you want the wireless client A with the MAC address 00:0A:EB:B0:00:0B and the wireless client B with the MAC address 00:0A:EB:00:07:5F to access the router, but other wireless clients cannot access
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 94
    that? 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless MAC Filtering. 3. Click Enable to enable the Wireless MAC Filtering function. 4. Select Allow the stations specified by any enabled entries in the list to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 95
    for Beacon Interval here. Beacon Interval value determines the time interval of the beacons. The beacons are the packets sent by the router to synchronize a wireless network. The default value is 100. • RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 96
    the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless Statistics to check the data packets sent and received by each client device connected to the router. • MAC Address - The MAC address of the connected wireless client. • Current Status - The running status of
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 97
    receive rate information. Click Start/Stop to start or stop wireless throughput monitor. 5. 5. DHCP By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 98
    Chapter 5 Configure the Router in Access Point Mode • DHCP Server - Enable or disable the DHCP server. If disabled, you must have another DHCP server within your network or else you must configure the computer manually. • Start IP Address - Specify an IP address for the DHCP Server to start with
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 99
    Chapter 5 Configure the Router in Access Point Mode • Client Name - The name of the DHCP client. the DHCP server. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to DHCP > Address Reservation. 3. Click Add New and fill in the blank. 1 ) Enter
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 100
    physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk By default, all the network clients can access your USB disk. Refer to the following table for access instructions. You can
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 101
    (If you have set up a username and password to deny anonymous access to the USB disk, you should select the Registered User radio box. To learn how to set up log in with the username and password you set for the router. 2. Go to USB Settings > Storage Sharing. • Server Status - the Storage Sharing
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 102
    log in with the username and password you set for the router. 3. Go to USB Settings > FTP Server. 4. Click Enable to enable the FTP Server. 5. Click Enable to enable the internet access to the FTP server. 6. Specify a port number for the Service Port. The default value is 21. 7. Click Apply. •• To
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 103
    FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk Locally Refer to the following table for access instructions. You can customize user accounts by
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 104
    Chapter 5 Configure the Router in Access Point Mode Open the Windows Explorer (or go to Use a third-party app for network files management. •• To access the USB disk remotely: Refer to the following table for access instructions. You can customize user accounts by referring to User Accounts. 97
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 105
    music and watch movies on the USB drive directly with DLNA-supported devices, such as on your computer, pad and PS2/3/4. •• To share specific folders: 1. Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 106
    is FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access the Media Files on Your USB Disk Now the DLNA-supported devices (such as your computer and pad) connected to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 107
    • Use a third-party DLNA-supported player. 5. 6. 4. User Accounts You can specify the username and password for Storage Sharing and FTP Server access. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to USB Settings > User Accounts. 3. Choose
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 108
    .net, and log in with the username and password you set for the router. 2. Go to System Tools > Diagnostic. • Diagnostic Tool - Select one diagnostic tool. • Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway. • Tracerouter - This
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 109
    problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries. • IP Address/Domain Name - Enter the destination IP address (such as 192.168.0.1) or Domain name (such as www.tp-link It makes the router continuously ping a user defined
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 110
    release the latest firmware at TP-Link official website. You can download the latest firmware file from the Support page of our website www.tp-link.com and upgrade the firmware to the latest version. 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 111
    settings from the backup file when needed. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Backup & Restore. •• To backup configuration settings: Click Backup to save a copy of the current settings in your local computer
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 112
    the web management port. • Upgrade the firmware of the router (system will reboot automatically). • Restore the router to its factory defaults (system will of the router, for all users that try to access the router's web-based utility or Quick Setup will be prompted for the router's username and
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 113
    5. 7. 8. System Log 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > System Log, and you can view the logs of the router. • Refresh - Refresh the page to show the latest log list. • Clear Log - All the logs will be deleted
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 114
    Chapter 6 Configure the Router in Range Extender Mode This chapter presents how to configure the various features of the router working as a range extender. It contains the following sections: • Status • Operation Mode • Network • Wireless • DHCP • USB Settings • System Tools • Log Out
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 115
    Go to Status. You can view the current status information of the router in Range Extender Mode. • Firmware Version - The version information of the router's firmware. • Hardware Version - The version information of the router's hardware. • LAN - This field displays the current settings of the LAN
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 116
    2.4GHz/5GHz > Basic Settings page. • Operation Mode - The current operation mode of the router. • Wireless Radio - Indicates whether the wireless feature is enabled or not. • Name (SSID) of Root AP - The SSID of the connected host network. • Name (SSID) - The SSID of the network. • Mode -
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 117
    and DMZ Host will not take effect until they are re-configured. 6. 4. Wireless 6. 4. 1. Connect to Network 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Connect to Network. 3. Configure the settings for the host
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 118
    if it is encrypted. 6. 4. 2. Extended Network 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Extended Network. 3. Configure the settings of the 2.4GHz/5GHz extended network and click Save. • Extended 2.4GHz/5GHz SSID
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 119
    Advanced 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless Advanced. 3. Configure the advanced settings of your wireless network and click Save. Note: If you are not familiar with the setting items on this page
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 120
    for Beacon Interval here. Beacon Interval value determines the time interval of the beacons. The beacons are the packets sent by the router to synchronize a wireless network. The default value is 100. • RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 121
    the username and password you set for the router. 2. Go to Wireless 2.4GHz/5Ghz > Wireless Statistics to check the data packets sent and received by each client device connected to the router. • MAC Address - The MAC address of the connected wireless client. • Current Status - The running status of
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 122
    Chapter 6 Configure the Router in Range Extender Mode • DHCP Server - Enable or disable the DHCP server. If disabled, you must have another DHCP server within your network or else you must configure the computer manually. • Start IP Address - Specify an IP address for the DHCP Server to start with
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 123
    physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk By default, all the network clients can access your USB disk. Refer to the following table for access instructions. You can
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 124
    the Guest radio box (If you have set up a username and password to deny anonymous access to the USB disk, you should select the Registered User radio box. To learn how to set up an account for the in with the username and password you set for the router. 2. Go to USB Settings > Storage Sharing. 117
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 125
    Chapter 6 Configure the Router in Range Extender Mode • Server Status - the Storage modify the entry. 6. 6. 2. FTP Server You can share specific folders on you USB drive on the LAN or access your USB drive outside the local area network. For example: • Only share specific folders with clients
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 126
    log in with the username and password you set for the router. 3. Go to USB Settings > FTP Server. 4. Click Enable to enable the FTP Server. 5. Click Enable to enable the internet access to the FTP server. 6. Specify a port number for the Service Port. The default value is 21. 7. Click Apply. • To
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 127
    FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk Locally Refer to the following table for access instructions. You can customize user accounts by
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 128
    music and watch movies on the USB drive directly with DLNA-supported devices, such as on your computer, pad and PS2/3/4. • To share specific folders: 1. Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 129
    is FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access the Media Files on Your USB Disk Now the DLNA-supported devices (such as your computer and pad) connected to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 130
    • Use a third-party DLNA-supported player. 6. 6. 4. User Accounts You can specify the username and password for Storage Sharing and FTP Server access. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to USB Settings > User Accounts. 3. Choose
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 131
    you might have a name resolution problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries. • IP Address/Domain Name - Enter the destination IP address (such as 192.168.0.1) or Domain name (such as www.tp-link.com). • Pings Count
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 132
    release the latest firmware at TP-Link official website. You can download the latest firmware file from the Support page of our website www.tp-link.com and upgrade the firmware to the latest version. 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 133
    settings from the backup file when needed. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Backup & Restore. • To backup configuration settings: Click Backup to save a copy of the current settings in your local computer
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 134
    • Change the DHCP settings. • Change the operation mode. • Change the web management port. • Upgrade the firmware of the router (system will reboot automatically). • Restore the router to its factory defaults (system will reboot automatically). • Update the configuration with the file (system will
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 135
    Mode It is strongly recommended that you change the default username and password of the router, for all users that try to access the router's web-based utility or Quick Setup will be prompted for the router's username and password. Note: The new username and password must not exceed 15 characters
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 136
    Chapter 6 Configure the Router in Range Extender Mode • Log Settings - Click to set the logs in the screen. • Save Locally - If Save Locally is selected, events will be recorded
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 137
    Chapter 7 Configure the Router in Client Mode This chapter presents how to configure the various features of the router working as a client. It contains the following sections: • Status • Operation Mode • Network • Wireless • DHCP • System Tools • Log Out
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 138
    . 2. Go to Status. You can view the current status information of the router in Client Mode. • Firmware Version - The version information of the router's firmware. • Hardware Version - The version information of the router's hardware. • LAN - This field displays the current settings of the LAN, and
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 139
    displays the basic information or status of the wireless function, and you can configure them on the Wireless 2.4GHz/5GHz > Wireless Settings page. • Operation Mode - The current operation mode of the router. • Wireless Radio - Indicates whether the wireless feature is enabled or not. • Name (SSID
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 140
    Router in Client Mode • LAN Type - Either select Smart IP(DHCP) to get IP address from DHCP server, or Static IP to configure IP address manually. Wireless 7. 4. 1. Wireless Settings 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 141
    another DHCP server within your network or else you must configure the computer manually. • Start IP Address - Specify an IP address for the DHCP Server the amount of time a network user will be allowed to connect to the router with the current dynamic IP Address. When time is up, the user will
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 142
    drive. 7. 6. 1. Storage Sharing Share your USB storage device with different users on the network. • To access the USB disk: 1. Connect Your USB Disk Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on. 135
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 143
    physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk By default, all the network clients can access your USB disk. Refer to the following table for access instructions. You can
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 144
    Mode • To customize your settings: 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to USB Settings > Storage Sharing. • Server Status - the Storage Sharing's current status. • Anonymous access to all volumes - This function is enabled by
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 145
    log in with the username and password you set for the router. 3. Go to USB Settings > FTP Server. 4. Click Enable to enable the FTP Server. 5. Click Enable to enable the internet access to the FTP server. 6. Specify a port number for the Service Port. The default value is 21. 7. Click Apply. • To
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 146
    FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk Locally Refer to the following table for access instructions. You can customize user accounts by
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 147
    Chapter 7 Configure the Router in Client Mode 1 ) Click Go in the top left corner of the Use a third-party app for network files management. • To access the USB disk remotely: Refer to the following table for access instructions. You can customize user accounts by referring to User Accounts. 140
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 148
    music and watch movies on the USB drive directly with DLNA-supported devices, such as on your computer, pad and PS2/3/4. • To share specific folders: 1. Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 149
    is FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access the Media Files on Your USB Disk Now the DLNA-supported devices (such as your computer and pad) connected to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 150
    • Use a third-party DLNA-supported player. 7. 6. 4. User Accounts You can specify the username and password for Storage Sharing and FTP Server access. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to USB Settings > User Accounts. 3. Choose
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 151
    you might have a name resolution problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries. • IP Address/Domain Name - Enter the destination IP address (such as 192.168.0.1) or Domain name (such as www.tp-link.com). • Pings Count
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 152
    release the latest firmware at TP-Link official website. You can download the latest firmware file from the Support page of our website www.tp-link.com and upgrade the firmware to the latest version. 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 153
    settings from the backup file when needed. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Backup & Restore. • To backup configuration settings: Click Backup to save a copy of the current settings in your local computer
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 154
    the firmware of the router (system will reboot automatically). • Restore the router to router. It is strongly recommended that you change the default username and password of the router, for all users that try to access the router's web-based utility or Quick Setup will be prompted for the router
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 155
    . 7. 7. 7. System Log 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > System Log, and you can view the logs of the router. • Refresh - Refresh the page to show the latest log list. • Clear Log - All the logs will be deleted
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 156
    Mode This chapter presents how to configure the various features of the router working as a hotspot router. It contains the following sections: • Status • Network • Wireless • Guest Network • DHCP • USB Settings • Port Forwarding • Security • Parental Controls • Access Control • Advanced Routing
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 157
    Go to Status. You can view the current status information of the router. • Firmware Version - The version information of the router's firmware. • Hardware Version - The version information of the router's hardware. • LAN - This field displays the current settings of the LAN, and you can configure
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 158
    displays the basic information or status of the wireless function, and you can configure them on the Wireless 2.4GHz/5GHz > Basic Settings page. • Operation Mode - The current operation mode of the router. • Wireless Radio - Indicates whether the wireless feature is enabled or not. • Name (SSID
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 159
    by your ISP. • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. • Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast applications. If you cannot get the IP address normally, you can choose this
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 160
    Chapter 8 Configure the Router in Hotspot Router Mode • IP Address - Enter the IP address in dotted- by your ISP. • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. PPPoE/Russia PPPoE If your ISP provides PPPoE connection
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 161
    Always On - Connect automatically after the router is connected. • Connect on demand - manually - You can click Connect/Disconnect to connect/disconnect immediately. This mode also supports configurations, please click Advanced. • Service Name/Server Name - The service name and server name should
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 162
    DNS server manually - If your ISP does not automatically assign DNS addresses to the router, please select Set DNS server manually and enter the if the IPTV service provided by the ISP is IGMP techonology-based. • Connection Mode • Always On - Connect automatically after the router is connected. •
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 163
    Chapter 8 Configure the Router in Hotspot Router Mode • Connect manually - You can click Connect/Disconnect to connect/disconnect immediately. This mode also supports the Max Idle Time function as Connect on demand mode. The internet connection can be disconnected automatically after a specified
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 164
    if the IPTV service provided by the ISP is IGMP techonology-based. • Connection Mode • Always On - Connect automatically after the router is connected. • disconnects. • Connect manually - You can click Connect/Disconnect to connect/disconnect immediately. This mode also supports the Max Idle Time
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 165
    feature if the IPTV service provided by the ISP is IGMP techonology-based. • Connection Mode • Always On - Connect automatically after the router is connected. • disconnects. • Connect manually - You can click Connect/Disconnect to connect/disconnect immediately. This mode also supports the Max Idle
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 166
    - The physical address of the LAN ports. The value can not be changed. • IP Address - Enter the IP address in dotted-decimal notation of your router (factory default - 192.168.0.254). • Subnet Mask - An address code that determines the size of the network. Normally 255.255.255.0 is used as the
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 167
    the public Wi-Fi you want to connect to. In the AP Setting, you can change the settings for your 2.4GHz/5GHz wireless network. • Wireless Network Name - Enter a string of up to 32 characters. The default SSID is TP-Link_XXXX (XXXX indicates the last unique four numbers of each router's MAC address
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 168
    SSID Broadcast - If enabled, the router will broadcast the wireless network name (SSID). 8. 3. 2. WPS WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This section will guide you to add a new wireless device to your router's network quickly via WPS. Note: The
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 169
    on the WPS page if the client device has been successfully added to the router's network. Method Three: Enter the Router's PIN 1. Keep the WPS Status as Enabled and get the Current PIN of the router. 2. Enter the router's current PIN on your client device to join the router's Wi-Fi network. 162
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 170
    in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless Security. 3. Configure the security settings of your 2.4GHz/5GHz wireless network and click Save. • Disable Wireless Security - The wireless security function can be enabled or disabled. If disabled
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 171
    by their MAC addresses. For example, you want the wireless client A with the MAC address 00:0A:EB:B0:00:0B and the wireless client B with the MAC address 00:0A:EB:00:07:5F to access the router, but other wireless clients cannot access the router. 1. Visit http://tplinkwifi.net, and log in with
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 172
    Advanced 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5GHz > Wireless Advanced. 3. Configure the advanced settings of your wireless network and click Save. Note: If you are not familiar with the setting items on this page
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 173
    for Beacon Interval here. Beacon Interval value determines the time interval of the beacons. The beacons are the packets sent by the router to synchronize a wireless network. The default value is 100. • RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 174
    client. • Received Packets - Packets received by the wireless client. • Sent Packets - Packets sent by the wireless client. • SSID - SSID that the wireless client is connected to. 8. 4. Guest Network Guest Network allows you to provide Wi-Fi access for guests without disclosing your main network
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 175
    Chapter 8 Configure the Router in Hotspot Router Mode • Guest Network Isolation - If enabled, one guest can not communicate with another. • Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules will take effect. • Band Select - Select the wireless band 2.4GHz or
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 176
    DHCP server within your network or else you must configure the computer manually. • Start IP Address - Specify an IP address for the DHCP provides two DNS servers. Note: To use the DHCP server function of the router, you must configure all computers on the LAN as Obtain an IP Address automatically
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 177
    MAC address of the DHCP client. • Assigned IP - The IP address that the router has allocated to the DHCP client. • Lease Time - The time of the DHCP ://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to DHCP > Address Reservation. 3. Click Add New and fill in
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 178
    physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk By default, all the network clients can access your USB disk. Refer to the following table for access instructions. You can
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 179
    (If you have set up a username and password to deny anonymous access to the USB disk, you should select the Registered User radio box. To learn how to set up log in with the username and password you set for the router. 2. Go to USB Settings > Storage Sharing. • Server Status - the Storage Sharing
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 180
    log in with the username and password you set for the router. 3. Go to USB Settings > FTP Server. 4. Click Enable to enable the FTP Server. 5. Click Enable to enable the internet access to the FTP server. 6. Specify a port number for the Service Port. The default value is 21. 7. Click Apply. •• To
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 181
    FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access Your USB Disk Locally Refer to the following table for access instructions. You can customize user accounts by
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 182
    Chapter 8 Configure the Router in Hotspot Router Mode Open the Windows Explorer (or go to Computer), -party app for network files management. •• To access the USB disk remotely: Refer to the following table for access instructions. You can customize user accounts by referring to User Accounts. 175
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 183
    music and watch movies on the USB drive directly with DLNA-supported devices, such as on your computer, pad and PS2/3/4. •• To share specific folders: 1. Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 184
    is FAT32 or NTFS. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to USB Settings > USB Mass Storage and click Disconnect. 2. Access the Media Files on Your USB Disk Now the DLNA-supported devices (such as your computer and pad) connected to
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 185
    • Use a third-party DLNA-supported player. 8. 6. 4. User Accounts You can specify the username and password for Storage Sharing and FTP Server access. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to USB Settings > User Accounts. 3. Choose
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 186
    problem that external hosts cannot initiatively communicate with the specified devices in the local network. With the forwarding feature, the router can traverse the isolation of NAT so that clients on the Internet can reach devices on the LAN and realize some specific functions. The TP-Link router
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 187
    Port list, you can enter the corresponding parameters manually. You should verify the port number that the service needs. • You can add multiple virtual server rules if you want to provide several services in a router. Please note that the Service Port should not be overlapped. Done! Users on
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 188
    net, and log in with the username and password you set for the router. 2. Go to Forwarding > Port Triggering. 3. Click Add New. need is not listed in the Common Applications list, please enter the parameters manually. You should verify the incoming ports the application uses first and enter them in
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 189
    online games, you can log in normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ host with all ports opened. How can I do that? 1. : • UPnP is enabled by default in this router. • Only the application supporting UPnP protocol can use this feature. 182
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 190
    Chapter 8 Configure the Router in Hotspot Router Mode • UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating system need to install the UPnP components). For example, when you connect your Xbox to the router which is connected to the
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 191
    . • VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP or L2TP protocols to pass through the router's firewall. through the use of cryptographic security services. If you want to allow IPSec tunnels to pass through the router, you can keep the default (Enabled
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 192
    Chapter 8 Configure the Router in Hotspot Router Mode into the gateway to support address and port translation for router. 2. Go to Security > Advanced Security, and you can protect the router from being attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood. • DoS Protection - Denial of Service
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 193
    for the router. 2. Go to Security > Local Management, and you can block computers in LAN from accessing the router. For example, if you want to allow PCs with specific MAC addresses to access the router's web management page locally from inside the network, please follow the instructions below: 186
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 194
    from a remote device via the Internet. • Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router's default remote management web port number is 80. For higher security, you can change the remote management web port to a custom port by entering a number
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 195
    :33:44:AA can access www.tp-link.com on Saturday only while the parent PC with the MAC address 00:11:22:33:44:BB is without any restriction. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Parental Controls. 3. Select Enable
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 196
    Chapter 8 Configure the Router in Hotspot Router Mode • Enter 00-11-22-33-44-BB in the MAC Address -1 field. • Select the allowed access time. • Enter www.tp-link.com in the Add URL field and click Add. 5. Click Save. 8. 10. Access Control Access Control is used to deny or allow specific client
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 197
    Chapter 8 Configure the Router in Hotspot Router Mode 1 ) Click Add New. 2 ) Select MAC Address as the the full name or the keywords (for example TP-Link) in the Add URL Address field and click Add. Note: Any domain name with keywords in it (e.g. www.tp-link.com) will be blocked or allowed. 3 )
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 198
    Chapter 8 Configure the Router in Hotspot Router Mode 3 ) Click Save. 5. Go to Access Control > Rule and add a new access control rule. 1 ) Click Add New. 2 ) Give a name for the rule in the Description
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 199
    Advanced Routing Static Routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. 8. 11. 1. Static Routing
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 200
    the IP address of the gateway device that allows for contact between the Router and the network or host. • Interface - This interface tells you whether the Destination IP Address is on the LAN & WLAN (internal wired and wireless networks), or the WAN (Internet). • Click Refresh to refresh the data
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 201
    Chapter 8 Configure the Router in Hotspot Router Mode The values you configure for the Egress Bandwidth and Ingress Bandwidth should be less than 100,000Kbps. For optimal control of the bandwidth, please
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 202
    an unrecognized MAC address. 8. 13. 1. Binding Settings 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to IP & MAC Binding > Binding Settings. 3. Select Enable for ARP Binding. 4. Click Save. •• To add IP & MAC Binding entries: 1. Click Add
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 203
    .org, or www.noip.com. The Dynamic DNS client service provider will give you a password or key. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Dynamic DNS. Comexe DDNS If the dynamic DNS Service Provider you select is www.comexe.cn, the
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 204
    Chapter 8 Configure the Router in Hotspot Router Mode To set up for DDNS, follow these instructions: 1. Enter the Domain Name received from your dynamic DNS service provider. 2. Enter the Username for your DDNS account. 3. Enter the Password for your DDNS account. 4. Click Login. 5. Click Save. •
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 205
    Chapter 8 Configure the Router in Hotspot Router Mode To set up for DDNS, follow these instructions: 1. Enter the Username for your DDNS account. 2. Enter the Password for your DDNS account. 3. Enter the Domain Name you received from dynamic DNS service provider here. 4. Click Login. 5. Click Save
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 206
    1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Time Settings and configure the system time as needed. •• To set time manually: 1. Select your local time zone. 2. Enter the Date in Month/Day/Year format. 3. Enter the Time
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 207
    you might have a name resolution problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries. • IP address/Domain name - Enter the destination IP address (such as 192.168.0.1) or Domain name (such as www.tp-link.com). • Pings Count
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 208
    release the latest firmware at TP-Link official website. You can download the latest firmware file from the Support page of our website www.tp-link.com and upgrade the firmware to the latest version. 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 209
    settings from the backup file when needed. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Backup & Restore. •• To backup configuration settings: Click Backup to save a copy of the current settings in your local computer
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 210
    Web Management Port. • Upgrade the firmware of the router (system will reboot automatically). • Restore the router to its factory defaults (system will password of the router, for all users that try to access the router's web-based utility or Quick Setup will be prompted for the router's username and
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 211
    • Refresh - Refresh the page to show the latest log list. • Clear Log - All the logs will be deleted from the router permanently, not just from the page. • Save Log - Click to save all the logs in a txt file. • Log Settings - Click to set the logs in
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 212
    displayed with related statistics. Total Packets The total number of packets received and transmitted by the router. Bytes The total number of bytes received and transmitted by the router. The total number of packets received and transmitted in the last Packets Statistic interval Packets seconds
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 213
    to the modem. • If you're in a hotel room or on a trade show, the internet may be limited and requires that you authenticate for the service or purchase the Internet access. • If your internet access is still not available, contact TP-Link Technical Support. Q2. How do I restore the router to its
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 214
    phone, microwave, and baby monitor, etc., to minimize signal interference. • When in Range Extender mode, the ideal location to place the router is halfway between your host AP and the Wi-Fi dead zone. If that is not possible, place the router closer to your host AP to ensure stable performance. 207
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 215
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 216
    AC750 Wi-Fi Travel Router Model Number: TL-WR902AC Component Name I.T.E. Power Model AMS135-0502000FU Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link the instructions, may
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 217
    colocated or operating in conjunction with any other antenna or transmitter." We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 218
    changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 219
    EC and 2011/65/EU. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article states and EFTA countries. AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 220
    aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Caution:
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 221
    device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended 214
  • TP-Link TL-WR902AC | TL-WR902ACUS V3 User Guide - Page 222
    • Do not use the device where wireless devices are not allowed. • Adapter shall be installed near the equipment and shall be easily accessible. • Use only power supplies which are provided by manufacturer
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
REV3.0.0
1910012191
User Guide
AC750 Wi-Fi Travel Router
TL-WR902AC