TRENDnet TC-NT2 Instruction Manual
TRENDnet TC-NT2 Manual
 |
View all TRENDnet TC-NT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TC-NT2 manual content summary:
- TRENDnet TC-NT2 | Instruction Manual - Page 1
TC-NT2 PROFESSIONAL NETWORK TESTER INSTRUCTION MANUAL - TRENDnet TC-NT2 | Instruction Manual - Page 2
be picked up with Net Probe or any tone probe for you easily locate cables. This tester is a perfect companion to any Network professional. The Network Cable Tester comes complete with BNC to RJ45 adapters for testing of coax BNC network and a RJ45 to RJ45 patch cord for testing patch panel and RJ45 - TRENDnet TC-NT2 | Instruction Manual - Page 3
Auto - scan and manual step testing. 4. Checks for opens shorts and cross connected wires. 5. Tests Lan, Telcom, UTP/STP and coax BNC cables. 6. Tone feature easily locates remote cable ends. CAUTION: NOT FOR USE ON LIVE CIRCUITS. DOING SO WHERE VOLTAGE IS PRESENT MAY DAMAGE THE TESTER. A. LOOP-BACK - TRENDnet TC-NT2 | Instruction Manual - Page 4
in relation to the TX row, to indicate status. (b) Manual Scan Mode: By pressing the TEST button, the tester will change from Auto Scan to Manual Scan mode. The TX row of LED will hold or flash combining the information indicated by the RX and TX LEDs, a cable pin-to-pin configuration (cross, 3 - TRENDnet TC-NT2 | Instruction Manual - Page 5
indicate an open or a burnt out LED. iii) If no LED will light - please check or replace your battery. 3. To test BNC, USB or other cable configurations please use the appropriate adapters and follow the above procedure. See RX and TX LED for test result. 4 - TRENDnet TC-NT2 | Instruction Manual - Page 6
light (or not) in relation to the Master tester unit to indicate status. 4. To test BNC, USB or other cable configurations, please use the appropriate adapters and follow the above procedure. C. SENDING TONE TO IDENTIFY CABLES Using Network cable tester s tone generator along with Net Probe or any - TRENDnet TC-NT2 | Instruction Manual - Page 7
panels or cables in a bundle. 3. Simply trace along the cable from the master unit using the tone as a guide, towards the remote end of the test cable until the tone disappeared will indicate the location of the break. D. PRODUCT PACKAGE 1. Master unit and remote unit. 2. RJ45 to BNC adapters. 6 - TRENDnet TC-NT2 | Instruction Manual - Page 8
is weak or fails, the LED indicators will be dim or fail to light. The tester may not scan. 3. Please take out the battery if you do not need to use the tester for any extended period. F. RODUCTION SPECIFICATION 1. Dimensions main 4.9 X 2.7 X 1.0 (125 X 68 X 26 ) remote 5.1 X 1.3 X 1.0 (130 X 32
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
TC-NT2
TC-NT2
PROFESSIONAL
NETWORK TESTER
INSTRUCTION MANUAL