TRENDnet TEW-412APBO Quick Installation Guide

TRENDnet TEW-412APBO Manual

TRENDnet TEW-412APBO manual content summary:

  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 1
    TEW-412APBO/TEW-413APBO Wireless 11g Outdoor AP Bridge Quick Installation Guide Guide d'installation rapide du Pont et point d'accès sans fil 11g pour extérieur Anleitung zur Schnellinstallation des Drahtloser 11g Außen-AP/Bridge Guía de
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 2
    Table of Contents English ...1 1. Introduction 1 2. Connect and power up the AP/Bridge 2 3. Configuring a setup computer on the LAN 4 4. Configuring the AP/Bridge 5 5. Quick test (Post test 8 Troubleshooting 10
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 3
    Hardware requirement List When setting up the TEW-412APBO/TEW-413APBO inter-building AP/Bridge, you will need the following: TEW-412APBO/TEW-413APBO Outdoor AP/Bridge Power Over Ethernet(POE) Power Supply User's Guide CD-ROM Mount kit TEW-412APBO/TEW-413APBO Wireless 11g Outdoor AP Bridge Quick
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 4
    : In some units, the directional flat panel antenna is embedded within the enclosure; the best reception will be directly through the front panel). Figure 3.1: Adjusting TEW-412APBO/TEW-413APBO for best reception Step 4 Secure the unit in the position. 2 English
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 5
    host to a spare port on the hub or a switch within the local network. The steps described above are summarized in the Figure 3.2. Figure 3.2: Connecting TEW-412APBO/TEW-413APBO to the power source and to the network In the next section, we will discuss the procedure to setup a computer on the local
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 6
    , Linux, or MAC with the standard browsers (e.g., Netscape or Microsoft Internet Explorer versions 4.0 or later). The usual factory settings for the TEW-412APBO/TEW-413APBO are: IP address: Netmask: 192.168.1.250 255.255.255.0 This computer must be connected to the same LAN as the TEW412APBO
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 7
    -413APBO, follow these steps: 1. Launch a web browser on a computer connected to the network. 2. Enter the AP/Bridge's IP address in the browser address line and press Enter. The default IP address of TEW-412APBO/TEW-413APBO AP/Bridge is 192.168.1.250, so type http://192.168.1.250 as the URL in your
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 8
    down to the LAN section and type in the IP Address, the Subnet Mask, and the Gateway that applies to your current networking settings. 5. Scroll down to the Wireless section and change the SSID to a name that will help you identify the TEW-412APBO/TEW-413APBO. In this example, the SSID will be
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 9
    6. Click Continue. Your AP should now be up and running. Consult the User's Guide on the CD for a description of the AP/Bridge system management functions and the instructions to access the Help Guide. 7 English
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 10
    5. Quick test (Post test) From a Wireless Computer (using TRENDnet's TEW-424UB as an example in this section) The settings of the Access Point are: SSID - TEW-412APBO Channel - 6 1. Double-click the wireless computer icon in your system tray (next to the clock in the bottom right corner of your
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 11
    3. Click Status and verify that the TEW-424UB is connected to the TEW412APBO/TEW-413APBO. 9 English
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 12
    IP address from your DHCP server. If you have any questions regarding the TEW-412APBO/413APBO, please contact Trendware Technical Support Department. Contact Technical Support Telephone: +1-310-626-6252 Fax: +1-310-626-6267 Website: www.TRENDNET.com E-mail: [email protected] Technical Support
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 13
    Certifications This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause
  • TRENDnet TEW-412APBO | Quick Installation Guide - Page 14
    @ Product Warranty Registration Please take a moment to register your product online. Go to TRENDware's website at http://www.TRENDNET.com TRENDware International, Inc. 3135 Kashiwa Street Torrance, CA 90505 http://www.TRENDNET.com Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14