TRENDnet TEW-634GRU User's Guide - Page 38

Enable/Disable, Channel, 11 Mode, Mixed 802.11b and 802.11g, Mixed 802.11n, 802.11b, and 802.11g, - 802 11 n

Get TRENDnet TEW-634GRU PDF manuals and user guides
UPC - 710931600629
View all TRENDnet TEW-634GRU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Enable/Disable: Enables or disables wireless LAN on the WLAN Router. SSID: Type an SSID in the text box. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN of the WLAN Router. Channel: Select a transmission channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the WLAN Router. 802.11 Mode: Select one of the following: zMixed 802.11b and 802.11g - Select if you are using both 802.11b and 802.11n wireless clients. zMixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Channel Width: Select the Channel Width: zAuto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. z20MHz - This is the default setting with single channel support required by Wi-Fi regulations. SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able to view the WLAN Router's SSID. For security purposes, users may want to disable SSID Broadcast to ensure only authorized clients have access. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
32
Enable/Disable:
Enables or disables wireless LAN on the WLAN Router.
SSID:
Type an SSID in the text box. The SSID of any wireless device must match
the SSID typed here in order for the wireless device to access the LAN and WAN
of the WLAN Router.
Channel:
Select a transmission channel for wireless communications. The channel
of any wireless device must match the channel selected here in order for the
wireless device to access the LAN and WAN via the WLAN Router.
802.11 Mode:
Select one of the following:
z
Mixed 802.11b and 802.11g
- Select if you are using both 802.11b and
802.11n wireless clients.
z
Mixed 802.11n, 802.11b, and 802.11g
- Select if you are using a mix of
802.11n, 11g, and 11b wireless clients.
Channel Width:
Select the Channel Width:
z
Auto 20/40
- Select if you are using both 802.11n and non-802.11n wireless
devices.
z
20MHz
- This is the default setting with single channel support required by
Wi-Fi regulations.
SSID Broadcast:
While SSID Broadcast is enabled, all wireless clients will be able
to view the WLAN Router’s SSID. For security purposes, users may want to
disable SSID Broadcast to ensure only authorized clients have access.