TRENDnet TEW-AP100 Manual

TRENDnet TEW-AP100 Manual

TRENDnet TEW-AP100 manual content summary:

  • TRENDnet TEW-AP100 | Manual - Page 1
    11M WLAN Access Point FreePort Station User' s Manual Rev 1.0
  • TRENDnet TEW-AP100 | Manual - Page 2
    Ÿ Text in bold indicates the names of menu options, buttons, text boxes, check boxes, software, and dialog boxes, etc., that you can select to perform operations. Ÿ The AP is referred as Access Point through this manual. Ÿ The personal computer to be used with the wireless LAN card is called the
  • TRENDnet TEW-AP100 | Manual - Page 3
    FreePort Station User's Manual Communication between a wireless LAN and a wired LAN This section describes how to use an AP when communicating between a wireless LAN and a wired LAN. Network Configuration
  • TRENDnet TEW-AP100 | Manual - Page 4
    FreePort Station User's Manual Table of Contents 1.Communications Between Ethernet LAN and Wireless LAN 5 Installation 5 2. Preparing the FreePort Station Settings 6 TCP/IP Protocol Setting 6 On Windows 98 / 95 6 Adding
  • TRENDnet TEW-AP100 | Manual - Page 5
    FreePort Station User's Manual 1. Communications Between Ethernet LAN and Wireless LAN This section explains the procedure for enabling communication between personal computers on an Ethernet LAN and personal computers
  • TRENDnet TEW-AP100 | Manual - Page 6
    Manual 2. Preparing the FreePort Station Settings (on the Personal Computer) The AP settings are preformed using a personal computer on the Ethernet LAN. For the proper AP setting, make sure that the following software the setting, check the LAN port drivers are properly installed in the personal
  • TRENDnet TEW-AP100 | Manual - Page 7
    FreePort Station User's Manual 5 Select "TCP/IP" and click the Properties button. 6 Click the IP Address tab, set the IP Address and click OK Consult your network administrator for
  • TRENDnet TEW-AP100 | Manual - Page 8
    FreePort Station User's Manual 3 Select Protocol, and click the Add button. 4 In the Manufacturers field, select Microsoft, and in the Network Protocols field, select TCP/IP and click the
  • TRENDnet TEW-AP100 | Manual - Page 9
    FreePort Station User's Manual 5 Check it Internet Protocol (TCP/IP) is displayed. If Internet Protocol (TCP/IP) is not displayed, refer to "Adding the TCP/IP Protocols (Windows 2000)"
  • TRENDnet TEW-AP100 | Manual - Page 10
    FreePort Station User's Manual 9 Click the Close button. Go to "Installing FreePort Station Manager" section. Adding the TCP/IP Protocols (Windows 2000) If the TCP/IP Protocol is not
  • TRENDnet TEW-AP100 | Manual - Page 11
    FreePort Station User's Manual 5 Select Protocol, and click the Add button. 6 Select Internet Protocol (TCP/IP), and click the OK button. 7 Check if the Internet Protocol (TCP/IP) is
  • TRENDnet TEW-AP100 | Manual - Page 12
    FreePort Station User's Manual 4 Click the Protocol tab and check that "TCP/IP Protocol" is listed in the Network Protocol field. 5 Select "TCP/IP Protocol" and click Properties. 6 Type
  • TRENDnet TEW-AP100 | Manual - Page 13
    FreePort Station User's Manual 3. Installing FreePort Station Manager Install the FreePort Station Manager in the settings personal computer using the following procedure. 1 Insert the Driver CD in the CD-ROM drive. 2 , and Uninstall FreePort Manager, and then follow the instruction on screen. 13
  • TRENDnet TEW-AP100 | Manual - Page 14
    FreePort Station User's Manual Display FreePort Setting Screen Follow the steps below to display the FreePort Station setting screen. 1 Refer to " Installing FreePort Station Manager" to install the FreePort
  • TRENDnet TEW-AP100 | Manual - Page 15
    FreePort Station User's Manual Enabling / Disabling the Roaming Function With the roaming function, an appropriate FreePort Station is automatically chosen according to the location of your PC. There is
  • TRENDnet TEW-AP100 | Manual - Page 16
    FreePort Station User's Manual Limiting connection from Wireless LAN PCs Follow the steps below to limit the connection capability from wireless LAN PCs to the FreePort Station. The steps
  • TRENDnet TEW-AP100 | Manual - Page 17
    wireless LAN PC to be connected to the wired LAN PCs in the "Wireless LAN Computer MAC Address" field and click Add. • Refer to the manual supplied with the wireless LAN PC for information about the MAC address. • The MAC address should be separated every two digits by colons ( : ). When the
  • TRENDnet TEW-AP100 | Manual - Page 18
    FreePort Station User's Manual Ensuring Security by the WEP (Encryption) Function Follow the steps below to encrypt wireless packets so that they cannot be intercepted by a third party. If
  • TRENDnet TEW-AP100 | Manual - Page 19
    FreePort Station User's Manual Grouping Multiple FreePort Stations If there are many FreePort Stations in the same area each having wireless LAN PCs connected, the overall data transmission speed
  • TRENDnet TEW-AP100 | Manual - Page 20
    FreePort Station User's Manual Configuring the Transmission Mode Follow the steps below to configure the transmission mode. 1 Refer to " Installing FreePort Station Manager" to install the FreePort Station Manager. 2
  • TRENDnet TEW-AP100 | Manual - Page 21
    FreePort Station User's Manual 4. Self-Diagnostic The FreePort Station performs self-diagnosis every time it is turned on or restarted. When an error occurs, the "DIAG" lamp flashes a specific
  • TRENDnet TEW-AP100 | Manual - Page 22
    FreePort Station User's Manual 5. Setting Screens Tables This section explains details of the setting screen tables. Setting Screen Configuration 22
  • TRENDnet TEW-AP100 | Manual - Page 23
    FreePort Station User's Manual Setting Screens Explanation Items marked with an asterisk (*) can be set using the Standard Setup screen. Detailed Settings (Bridge Mode) Note 1: Enter a maximum of 32
  • TRENDnet TEW-AP100 | Manual - Page 24
    FreePort Station User's Manual Machine Diagnostics 24
  • TRENDnet TEW-AP100 | Manual - Page 25
    and dial-up router, or other DHCP server function, refer to the Windows 2000, Windows NT, or dial-up router manual, or consult the manufacturer. There should be no DHCP server problems for Windows 98/95 personal computers only on the network. ESS-ID This ID is used to prevent cross-communication
  • TRENDnet TEW-AP100 | Manual - Page 26
    FreePort Station User's Manual the world. In an Ethernet LAN, the MAC address is used as a base to additional explanation of the computer name. You can also leave this box blank. Firmware Firmware is the name given to the software (programs) built into hardware such as the router, modem, and 26
  • TRENDnet TEW-AP100 | Manual - Page 27
    FreePort Station User's Manual terminal adapter. This software is built into the hardware, so it can be said to be in-between hardware and software. Protocol Protocols are the procedures and regulations for sending and receiving data between the network terminals. For example, if two computers are
  • TRENDnet TEW-AP100 | Manual - Page 28
    FreePort Station User's Manual 7. Product Specifications This chapter describes the specifications of the product and the LAN port connector. 28
  • TRENDnet TEW-AP100 | Manual - Page 29
    FreePort Station User's Manual LAN Port Connector Specifications The RJ-45 8-pole connector, specified ISO / IEC8877:1992. MDI Signal Assignment 29
  • TRENDnet TEW-AP100 | Manual - Page 30
    NOTICE The information in this manual is subject to change without notice. Federal Communications Commission Notice radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

11M WLAN Access Point
FreePort Station
User’s Manual
Rev 1.0