TRENDnet TEW-P1PG Windows Setup Guide

TRENDnet TEW-P1PG - Wireless Parallel Print Server Manual

Get TRENDnet TEW-P1PG - Wireless Parallel Print Server PDF manuals and user guides
UPC - 710931502657
View all TRENDnet TEW-P1PG manuals
Add to My Manuals
Save this manual to your list of manuals

TRENDnet TEW-P1PG manual content summary:

  • TRENDnet TEW-P1PG | Windows Setup Guide - Page 1
    TE100-P1P/TEW-P1PG Windows 7 Installation Instruction Hardware Installation 1. Go to http://www.trendnet.com/downloads/ to download the Windows 7 Utility. Save the file to your desktop. 2. Right click on the file and select Extract All. Follow the wizard to uncompress the file. 3. Connect a RJ-45
  • TRENDnet TEW-P1PG | Windows Setup Guide - Page 2
    click Save. (Enable and enter the encryption key if your wireless network is encrypted. Please contact your Network Administrator for the encryption key)(TEW-P1PG only). e. Unplug the Ethernet cable and the power adapter from the print server. Wait 15 seconds, then plug the power adapter back in
  • TRENDnet TEW-P1PG | Windows Setup Guide - Page 3
    your computer 1. Double click on PSWizardSetup_v2.20.exe 2. Follow the steps to add the printer to your computer a. Select the print server, select the desired port and then click Add Printer. b. Click Select from manufacturer list. Select the appropriate driver for your printer and then click Next.
  • TRENDnet TEW-P1PG | Windows Setup Guide - Page 4
    c. Click Next. d. Click Print Test Page. e. Click OK.
  • TRENDnet TEW-P1PG | Windows Setup Guide - Page 5
    f. Click Finish. g. Repeat the above steps to add the printer to other computers on the network
  • TRENDnet TEW-P1PG | Windows Setup Guide - Page 6
    password. How do I reset my print server? Factory reset the print server using the following procedure. This procedure will reset all settings to default. By default, there is no password. 1. Open up PS-Utility. 2. Copy down the last 4 digits of the MAC address. 3. Press the Factory Reset button
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
TE100-P1P/TEW-P1PG Windows 7 Installation Instruction
1.
Go to
Hardware Installation
to download the Windows 7 Utility. Save the file to
your desktop.
2.
Right click on the file and select
Extract All
.
Follow the wizard to uncompress the file.
3.
Connect a RJ-45 Network cable from a switch/router to the LAN port of the Print Server
4.
Connect the detachable antenna (for TEW-P1PG only)
5.
Connect the AC power adapter to the Print Server and then to a power outlet
6.
Connect the Parallel Printer to the Parallel port on the Print Server
7.
Power on the Printer
Configure the Print Server
1.
Double click on
PSUtilitySetup_v3.13.exe
2.
Follow the steps to configure the Print server
b. Click
OK
a. Select the Print Server and
click
Change IP Address
.
Manually assign the
IP
Address
of the Print
Server and then click
OK
.
Note:
The IP Address must
match the network
segment of your network.