TRENDnet TK-800R Manual
TRENDnet TK-800R Manual
 |
View all TRENDnet TK-800R manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TK-800R manual content summary:
- TRENDnet TK-800R | Manual - Page 1
TABLE OF CONTENTS INTRODUCTION 1 FEATURES 1 PACKAGE CONTENTS 1 TECHNICAL SPECIFICATIONS 2 SYSTEM REQUIREMENT 3 CABLE DIAGRAMS 3 PRODUCT DETAILS 4 HARDWARE INSTALLATION 5 USAGE 5 ON SCREEN DISPLAY OPERATION 9 TROUBLESHOOTING 11 CERTIFICATES 12 - TRENDnet TK-800R | Manual - Page 2
-chain port ?? Auto-detect daisy-chain bank Package Contents Model No.: TK-400R 4 port KVM Switch 1 PCS User's Guide 1 PCS AC to DC Power Adapter 1 PCS Rack Mount Kit 1 SET Daisy Chain Cable 1 SET Model No.: TK-800R 8 port KVM Switch 1 PCS User's Guide 1 PCS AC to DC Power Adapter - TRENDnet TK-800R | Manual - Page 3
Chain Cable Model No.: TK-1600R 16 port KVM Switch User's Guide AC to DC Power Adapter Rack Mount Kit Daisy Chain Cable 1 SET 1 SET 1 PCS 1 PCS 1 PCS 1 SET 1 SET Technical Specifications Model No. PC Port Console Port PC Port Connector (All Female Type) Console Port Connector (All Female Type - TRENDnet TK-800R | Manual - Page 4
VGA Monitor One PS/2 Keyboard One PS/2 Mouse For Computer Port 4 HDB 15 pin male-to-male VGA cables 4 PS/2 cables male-to-male for Keyboards 4 PS/2 cables male-to-male for Mouse TK-800R T K-1600R One VGA Monitor One PS/2 Keyboard One PS/2 Mouse One VGA Monitor One PS/2 Keyboard One PS - TRENDnet TK-800R | Manual - Page 5
Product Details Front Panel & Rear Panel of TK-400R: Front Panel & Rear Panel of TK-800R: Front Panel & Rear Panel of TK-1600R: 4 - TRENDnet TK-800R | Manual - Page 6
, and Mouse to the KVM Switch's "Console Port". 5. Power on the KVM Switch and the computers. Daisy-Chain You can daisy-chain eight TK -####R series KVM Switches together. To connect more then one TK-####R series KVM Switches together, turn off all computers and Switches, use the included daisy - TRENDnet TK-800R | Manual - Page 7
you can keep pushing the button to cycle through every port on the Switch. TK-800R (8 Port) TK-1600R (16 Port) "Port No." LED Indication: When the selected Computer Port is disconnected from the PC or if the PC is not powered up, the Switch's "Port No." LED will flash. When the selected Computer - TRENDnet TK-800R | Manual - Page 8
not "recognize" the connected PCs properly and performing a reset (same as power off and then on) can solve the problem. To Reset the KVM Switch, press "Bank Select" and 'Port Select" buttons simultaneously and then release the buttons. The Switch will beep once, the LED display shows -- -- --, the - TRENDnet TK-800R | Manual - Page 9
Port in Dais y-Chain Configuration: Scroll Lock Scroll ? Lock ? Bank No. Port No. 1 ~ 8 ? 01 ~ 16 Note: Port No. = 01 ~ 04 (TK-400R) 01 ~ 08 (TK -800R) 01 ~ 16 (TK and then press "B". During the scan, the Switch's LEDs will display the "Port No." that it is currently monitoring. The default - TRENDnet TK-800R | Manual - Page 10
the OSD Menu, the following small window (taken from TK -1600R) appears on the monitor. BANK : 1 0 ports are on the KVM Switch. You can define your own PC Name (maximum 10 characters), please see instructions below. The factory default PC Name for each port is SYSTEM ##, where ## is the Port - TRENDnet TK-800R | Manual - Page 11
the selected Computer Name's right hand side, pointing to the selected computer name. After you have selected the desired PC Port, you can press the ENTER Key to switch to the selected PC Port. After finding the PC that you are looking for, hit "Esc" key to cancel the OSD operation. Use " PgUp - TRENDnet TK-800R | Manual - Page 12
Performing RESET and Power off the Switch also turns the CONSOLE off. When KVM Switch. e. After entering the CONSOLE (by entering the correct password), you will see the PC Name displayed on the monitor. You can hit "Esc" key to remove the name displayed on the screen. 102 ¤ SYSTEM 02 Troubleshooting - TRENDnet TK-800R | Manual - Page 13
adapter was used. ?? Avoid moving the mouse or pressing the mouse's buttons when switching from port to port. ?? Avoid switching ports when the PC is shutting down. ?? When you switch from one PC port to another PC port, the best scan time interval is 5 seconds or more. Normally, it takes a couple
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
TABLE OF CONTENTS
INTRODUCTION……………….………………………………………..1
FEATURES…………...………………………………………………….1
PACKAGE CONTENTS……………...…………………………………1
TECHNICAL SPECIFICATIONS………...…………………………….2
SYSTEM REQUIREMENT……………………………………………..3
CABLE DIAGRAMS…………………………………………………….3
PRODUCT DETAILS……………………………………………………4
HARDWARE INSTALLATION…………………………………………5
USAGE……………………………………………………………………5
ON SCREEN DISPLAY OPERATION…………………………………9
TROUBLESHOOTING………………………..……………………….11
CERTIFICATES………………………………………………………..12