TRENDnet TPE-102S Quick Installation Guide
TRENDnet TPE-102S - PoE Splitter Manual
 |
UPC - 710931505023
View all TRENDnet TPE-102S manuals
Add to My Manuals
Save this manual to your list of manuals |
TRENDnet TPE-102S manual content summary:
- TRENDnet TPE-102S | Quick Installation Guide - Page 1
Quick Installation Guide TPE-101I TPE-102S - TRENDnet TPE-102S | Quick Installation Guide - Page 2
TTaabblleeoof Cf oCnotennttesnts English ...1 1. Before You Start 1 2. Hardware Installation 3 Technical Specifications 5 Troubleshooting 6 Version 06.20.2007 - TRENDnet TPE-102S | Quick Installation Guide - Page 3
Contents ? TPE-101I/TPE-102S ? Quick Installation Guide ? Power Cord (TPE-101I) ? Jumper Cable (TPE-102S) Note: The TPE-101I and TPE-102S only support Power over Ethernet (PoE) devices that follow the IEEE 802.3af standard Note: The TPE-102S only supports non-PoE devices with an output power of 5V - TRENDnet TPE-102S | Quick Installation Guide - Page 4
Data Power over Ethernet Injector (TPE-101I) Power + Data (PoE) Power Data Power Jack 8-Port 10/100Mbps Fast Ethernet Switch (TE100-S8) Power over Ethernet Injector (TPE-101I) Power + Data (PoE) Power 5V/7.5V/9V/12V DC Power Data Power + Data Power over Ethernet Splitter (TPE-102S) Power Data - TRENDnet TPE-102S | Quick Installation Guide - Page 5
Installation Using the TPE-101I with a PoE device 1. Connect the Power Cord to the Injector. Then connect the Power Cord to an outlet. 2. Connect a CAT-5 cable from a switch to the TPE-101I's Data In port. 3. Connect a CAT-5 cable from a PoE device (e.g. TEW-434APB) to the TPE-101I's PoE Out port - TRENDnet TPE-102S | Quick Installation Guide - Page 6
the output power for your non-PoE device. The TPE-102S only supports non-PoE devices with an output power of 5V, 7.5V, 9V or 12V. 1. Select the proper voltage (5V, 7.5V, 9V or 12V). 2. Connect an Ethernet cable from a PoE switch to the PoE In port on the TPE-102S. 3. Connect the Ethernet cable from - TRENDnet TPE-102S | Quick Installation Guide - Page 7
10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3af Power Over Ethernet (PoE) Data: 1, 2, 3, 6 Power: 4, 5 (V+), 7, 8 (V-) TPE-101I: 1 Data In, 1 PoE Out TPE-102S: 1 Data Out, 1 PoE In 10/20Mbps for half/full-duplex 100/200Mbps for half/full-duplex POWER TPE-102S: DC OUT (5V, 7.5V, 9V, 12V) 10BASE-T: UTP - TRENDnet TPE-102S | Quick Installation Guide - Page 8
the power adapter connector from the PoE injector or disconnecting the CAT 5 cable from the PoE Out port. Reinsert the connection after 5-10 seconds have elapsed. If you still encounter problems or have any questions regarding the PoE Injector/Splitter, please contact TRENDnet's Technical Support - TRENDnet TPE-102S | Quick Installation Guide - Page 9
service, for the following lengths of time from the date of purchase. TPE-101I/TPE-102S - 5 Year Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet specified in the manual. Warranty service may be obtained by contacting TRENDnet office within the - TRENDnet TPE-102S | Quick Installation Guide - Page 10
, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE - TRENDnet TPE-102S | Quick Installation Guide - Page 11
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired - TRENDnet TPE-102S | Quick Installation Guide - Page 12
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
TPE-101I
TPE-102S
Quick Installation Guide