TRENDnet TVP-221H User Guide

TRENDnet TVP-221H Manual

TRENDnet TVP-221H manual content summary:

  • TRENDnet TVP-221H | User Guide - Page 1
  • TRENDnet TVP-221H | User Guide - Page 2
    TVP-221H User's Guide FCC Notice This equipment has been tested and found to comply with the limits and can radiate radio frequency energy and, if not installed in accordance with the instruction manual, may cause harmful interference to radio communication. Operation of this equipment in a
  • TRENDnet TVP-221H | User Guide - Page 3
    TVP-221H User's Guide How to Use This Manual This manual was designed for the non-technical users of the VoIP Gateway (TVP221H). It contains information about the functions of the TVP-221H and instructions for its installation, basic configuration and operation. Read this section carefully for
  • TRENDnet TVP-221H | User Guide - Page 4
    TVP-221H User's Guide Documentation Abbreviations Throughout this guide, the user will come across a number of abbreviations that Multimedia Telecommunications Consortium IP Internet Protocol TVP-221H 4-port VoIP Gateway TVP-224HR 4-port VoIP Gateway Router KTS Key Telephone System LAN
  • TRENDnet TVP-221H | User Guide - Page 5
    TVP-221H User's Guide Notation Conventions Throughout this guide, different type styles and characters are used. These serve a variety of purposes as described for which you supply values are in italics. Messages that the TVP-221H CLI displays are in plain courier font. Elements in square brackets
  • TRENDnet TVP-221H | User Guide - Page 6
    TVP-221H User's Guide Table of Contents How to Use This Manual ...3 Important Safety Instructions 3 Documentation Abbreviations 4 Notation Conventions...5 CHAPTER 1 10 OVERVIEW 10 1.1 Features ...10 1.2 Networking Protocols 10 1.3 Package Contents ...11 1.4 Front Panel...11 LED Indicators ...11
  • TRENDnet TVP-221H | User Guide - Page 7
    TVP-221H User's Guide 3.2 ATPM ...16 3.3 Destination ...16 3.4 Hunt Group...17 3.5 Dial Plan ...17 3.51 Address Table...17 3.52 Hunt Group Table...18 3.53 Destination Table ...18 3.6 DTMF Relay ...18 3.7 Voice Codecs ...19 CONFIGURING TVP-221H FROM A WEB BROWSER 20 4.1 HTTP setting mode ...20 PC
  • TRENDnet TVP-221H | User Guide - Page 8
    with TVP-221H FXS Port 45 5.3 Making a call with TVP-221H FXO Port 46 5.4 Web Browser Sample Dial Plan 46 5.5 Making a call between Gateway A and Gateway B 53 Case 1: Gateway Phone to Gateway Phone 53 Case 2: Gateway Phone to PSTN Phone 54 Case 3: PSTN Phone to Gateway Phone 54 5.6 VoIP in
  • TRENDnet TVP-221H | User Guide - Page 9
    TVP-221H User's Guide 6.1 Port Configuration ...77 Application 1: Special FXS Connections 78 Application 2: FXO Connections 78 CHAPTER 7 79 TROUBLESHOOTING TIPS 79 Appendix A - Technical Specifications 81 TVP-221H Technical Specifications 81 Console Port ...83 LAN Port...83 FXO Port Pin
  • TRENDnet TVP-221H | User Guide - Page 10
    immediate cost savings. One VoIP Gateway supports up to four voice or Fax communications simultaneously. Implemented with an efficient Real-Time Operating System (RTOS) and flash memory, the TVP-221H provides upgradeable capabilities, so it may be programmed with updated firmware locally or via the
  • TRENDnet TVP-221H | User Guide - Page 11
    should contain the following items: • TVP-221H VoIP Gateway 4 port desk top version • 100-240V Power Adapter • 9-pin straight through RS-232 cable • Printed Quick Installation Guide • User's guide (CD) • RJ45 Cable 1.4 Front Panel The front panel of the TVP-221H contains a push button and LED
  • TRENDnet TVP-221H | User Guide - Page 12
    TVP-221H User's Guide Indicator Color Activity Indication PWR Green On Power is supplied to the gateway. SYSTEM LAN ACT 100M LED. This button allows you to reset the TVP-221H or force the TVP-221H to enter firmware upgrade mode. To reset the gateway, push a small, stiff object into the hole
  • TRENDnet TVP-221H | User Guide - Page 13
    LAN / Console Ports TVP-221H User's Guide The TVP-221H is equipped with an Ethernet interface with 10/100 Mbps autonegotiation, auto MDIX capability. The Ethernet interface port is located on the rear panel. In
  • TRENDnet TVP-221H | User Guide - Page 14
    to the Internet via an Ethernet LAN. 2. IP network that supports gateway, and subnet mask. You'll need a static IP address to assign the TVP-221H or a DDNS account for your Dynamic IP. 2.2 Installing the TVP-221H Due to the TVP-221H being used in a desktop configuration, ensure that the TVP221H is
  • TRENDnet TVP-221H | User Guide - Page 15
    . The TVP-221H can be configured with a fixed IP address, subnet mask and default gateway (typically a router). The TVP-221H can also TVP-221H, insert one end of the Ethernet cable into the RJ45 port on the rear panel of the TVP-221H and other end directly to your PC Terminal. The TVP-221H supports
  • TRENDnet TVP-221H | User Guide - Page 16
    Capture of telephone number presented as DTMF tones. • Mapping the telephone number to the IP address of remote VoIP Gateway. • Setting up calls with remote TVP-221Hs utilizing H.323 call control protocol. • Digitizing, compressing and encapsulating the voice into IP packets and transmission of the
  • TRENDnet TVP-221H | User Guide - Page 17
    TVP-221H User's Guide destination for the call is the telephony port where the call terminated. For calls initiated from telephony ports, the TVP-221H forwards the call to a remote TVP221H/TVP-221H via IP network, and the remote TVP-221H/TVP-221H the TVP-221H to process calls to remote VoIP Gateways.
  • TRENDnet TVP-221H | User Guide - Page 18
    . Digits 201 3 3 301 4 3 8 1 3 0 1 1 20 11 5 TVP-221H User's Guide Max. Digits Prefix strip 3 3 3 3 3 0 1 0 5 2 Prefix Address TVP-221H before it is sent across the IP network and then decompressed by the destination VoIP gateway. The voice codecs supported by the TVP-221H
  • TRENDnet TVP-221H | User Guide - Page 19
    detailed information on how to select DTMF relay mode. 3.7 Voice Codecs Voice codecs supported by the TVP-221H include G.711, G.723.1 5.3kbps, G.723.1 6.3kbps and G.729 AB. When setting up a call, two VoIP Gateways automatically negotiate with each other until an agreement on codec is determined. 19
  • TRENDnet TVP-221H | User Guide - Page 20
    TVP-221H User's Guide Chapter 4 4 Configuring TVP-221H from a Web Browser This chapter explains procedures for configuring the TVP-221H from a web browser. 4.1 HTTP setting mode This section describes the processes for setting up the VoIP Gateway once it has been installed. Java enabled
  • TRENDnet TVP-221H | User Guide - Page 21
    TVP-221H User's Guide 5. On the IP Address table, enter values as follows: • Specify an IP address set ON. • IP Address: 192.168.0.2 • Subnet Mask: 255.255.255.0 Restart
  • TRENDnet TVP-221H | User Guide - Page 22
    TVP-221H User's Guide Main Menu Function Briefings Home H.323 Configuration Dial Plan Settings Line Settings Administration Status Help Manual View System Status Set H.323 Parameters Links to dial plan setting , DDNS Link to Trendware FTP Website, online user manual and support materials. 22
  • TRENDnet TVP-221H | User Guide - Page 23
    TVP-221H User's Guide Select Home In order to view the System Status page, please navigate to Home. The System Status page will display the following parameters: Firmware Version • TVP-221H VoIP Gateway of the TVP-221H and other end directly to your PC Terminal. The TVP-221H supports auto MDIX
  • TRENDnet TVP-221H | User Guide - Page 24
    TVP-221H User's Guide Fixed IP - Connection Details If you are using a Fixed IP, you are either using a fixed IP as assigned by your ISP or your Systems Administrator. Please enter your Fixed IP as designated by your ISP along with Subnet Mask and Default Gateway. If you have a locally assigned
  • TRENDnet TVP-221H | User Guide - Page 25
    DHCP Client TVP-221H User's Guide If you will be using the DHCP with a DHCP server on your local LAN 1. Select Yes 2. Click on OK 3. Click on Reboot for changes to take effect PPPoE If you will be using the PPPoE as assigned my your ISP 1. Select Yes 2. Enter Service name, User Name and
  • TRENDnet TVP-221H | User Guide - Page 26
    DNS TVP-221H User's Guide It allows Internet users to connect to your gateway using a static URL, rather than an IP Address. This is particularly useful because a dynamic IP address, by definition, is constantly changing making it difficult for internet users to find you. The Service works
  • TRENDnet TVP-221H | User Guide - Page 27
    TVP-221H User's Guide Data - Dynamic DNS Screen DDNS Service DDNS Service DDNS Data Dyn DNS User Name Password/Key Domain Name (Hostname) DDNS Status You must register for the service indicates some problem, you need to connect to the DDNS Service provider and correct this problem. 4.3 H.323
  • TRENDnet TVP-221H | User Guide - Page 28
    TVP-221H User's Guide H.323 Parameters For the most part end users will not be using these functions / features and / or should use the default settings. For more information please see the Advanced User Manuals or consult with your Systems Integrator 1. Display Name: The default string is "Customer
  • TRENDnet TVP-221H | User Guide - Page 29
    TVP-221H User's Guide default is 300 Gatekeeper This page is home to many specific H.323 Gateway / Gatekeeper functions / features. For the most part end users Manuals or consult with your Systems Integrator The primary function of the gatekeeper component is to provide address translation services
  • TRENDnet TVP-221H | User Guide - Page 30
    TVP-221H User's Guide iii. Manual: Enables gatekeeper co-operation in manual operation (the gatekeeper address must be properly assigned). The following fields must be filled in when Gate Keeper Mode is set to manual. 2. Gate Keeper Address: Specify the gatekeeper address when configured to manual
  • TRENDnet TVP-221H | User Guide - Page 31
    TVP-221H User's Guide Aliases For the most part end users will not be using these functions / features and / or should use the default settings. For more information please see the Advanced User Manuals or consult with your Systems Integrator Alias: This field is to create or delete aliases that are
  • TRENDnet TVP-221H | User Guide - Page 32
    4.4 Dial Plan Settings Dial Plan Setup TVP-221H User's Guide Using the function scroll bar on the right, you are able to Add, Delete, Find or List data to/from one of 3 tables (While it
  • TRENDnet TVP-221H | User Guide - Page 33
    TVP-221H User's Guide From this window, we can Add / Delete / Find or List desired telephone numbers and map them to a hunt group. Parameter Telephone Number Hunt Group ID
  • TRENDnet TVP-221H | User Guide - Page 34
    TVP-221H User's Guide From this window, we can Add / Delete / Find or List the desired hunt group ID and map it to a destination ID. Destination ID Table 1. From
  • TRENDnet TVP-221H | User Guide - Page 35
    TVP-221H User's Guide Each telephony port of the TVP-221H must be assigned a unique destination ID. Fill out the worksheet for local destinations by designating each port a unique destination ID, 4.42 Dial in PLAR / CID Data - Dial in PLAR / CID Screen DDNS Service over IP (VoIP) call without
  • TRENDnet TVP-221H | User Guide - Page 36
    TVP-221H User's Guide and a a remote PBX. Many customers want to offer toll-bypass VoIP services without having the routers provide dialtone or change their existing dialplan the Non-Volatile Storage is not the working Dial Plan. If the Gateway is turned off for what ever reason, the Dial Plan from
  • TRENDnet TVP-221H | User Guide - Page 37
    4.44 Clear Dial Plan TVP-221H User's Guide Clear Dial Plan - Will clear the Dial Plan from DRAM / This only saves the plan to the working memory / DRAM. If there was a power outage or the TVP-221H was unplugged or a system crash for what ever reason, the Dial Plan in working memory / DRAM will be
  • TRENDnet TVP-221H | User Guide - Page 38
    TVP-221H User's Guide (Default 5000ms) Termination Digit A special number which tells the gateway that you have finished entering your telephone number and that the manage the TVP-221H via the Internet using your web browser or Telnet. Upgrade The firmware (software) in the TVP-221H can be upgraded
  • TRENDnet TVP-221H | User Guide - Page 39
    Firmware Web Browser. TVP-221H User's Guide Administration Password Setup / Login The Administration Password Page allows you to change your password on the TVP-221H. To change your password, navigate to Password from the main Administration Menu. Data - Administration Password Setup Admin
  • TRENDnet TVP-221H | User Guide - Page 40
    TVP-221H User's Guide Enter the default "User Name" and the "Password" you set on the Administration Password Setup screen above. Remote Administration Remote Administration allows you to connect to this interface via the Internet, using your Web browser or Telnet. By default, both services are
  • TRENDnet TVP-221H | User Guide - Page 41
    TVP-221H User's Guide each time you connect to your ISP. There are 2 solutions to this problem: Have your ISP allocate you a Fixed IP address. Use the DDNS Upgrading Firmware Using the Web Browser Use this screen to upgrade your TVP-221H's firmware. • You must download the required firmware file,
  • TRENDnet TVP-221H | User Guide - Page 42
    Update Cancel TVP-221H User's Guide Click this button to start the Firmware upgrade. Note than any users accessing the Internet via the TVP-221H will lose their connection. When the upgrade is finished, the TVP-221H will restart, and this management connection will be unavailable during the restart
  • TRENDnet TVP-221H | User Guide - Page 43
    Click on View 4.9 Help Here you will find helpful definitions to common parameters in the TVP-221H User Interface. In addition, from the main page in the help menu, you can link to the Trendware FTP website and download the most current User Guide and support materials ftp.trendware.com/TVP-221H/ 43
  • TRENDnet TVP-221H | User Guide - Page 44
    Chapter 5 TVP-221H User's Guide 5 Making Calls with TVP-221H This chapters shows how to make phone calls from telephony devices connected to the TVP-221H directly through or indirectly. 5.1 Configuration Examples Default Dial Plan Before any configuration set up, your TVP should have the
  • TRENDnet TVP-221H | User Guide - Page 45
    dial '316', your extension handset should ring right away. Hint This guide only uses the default values. Once you are familiar with the dial plan set up, you may design your own dial plan. 5.2 Making a call with TVP-221H FXS Port TVP-221H has two FXS ports. An FXS port can connect to an analogue
  • TRENDnet TVP-221H | User Guide - Page 46
    phone number is illegal, the TVP-221H will play three out of service tones, please check the dial plan and your desired destination phone number. 5.4 Web Browser Sample Dial Plan This section describes how to use a web browser to build a dial plan in the VoIP Gateway. We suggest the following when
  • TRENDnet TVP-221H | User Guide - Page 47
    TVP-221H User's Guide Draw an application diagram to illustrate / clarify application including: 1. Local gateway: IP setup 2. Local gateway: local telephone number setup 3. Local gateway: remote gateway IP & remote telephone number setup Note: The Diagram below of Gateway A & B could be any
  • TRENDnet TVP-221H | User Guide - Page 48
    TVP-221H User's Guide in Taiwan (Local Area Code have 2 digits) and GW B is in the US (Local Area Codes have 3 digits). Gateway A, 4 ports, is configured as follows: 1. Gateway A IP: 192.168.1.20, mask IP: 255.255.255.0, gateway , Hunt Group (eg. Customer Service may have multiple phones that the
  • TRENDnet TVP-221H | User Guide - Page 49
    TVP-221H User's Guide The following screen shots show an example for entering a dial plan for a single number. This example should give you the necessary insight as to how
  • TRENDnet TVP-221H | User Guide - Page 50
    TVP-221H User's Guide 1. Continue entering the Gateway A Dial Plan as laid out in the tables below ( Store Dial Plan, and click YES to save your dial plan to Flash Memory. Gateway A and Gateway B Dial Plan Tables Gateway A - Telephone Number Table Phone Hunt Min. Max. Prefix Prefix # Group ID
  • TRENDnet TVP-221H | User Guide - Page 51
    dials "800". TVP-221H User's Guide applicable 801 5 Dialing "801" calls PBX on 13 0 None Digit US Area Code) are make calls to remote sent to GW B. GW B FXO (External - PBX to PSTN) Gateway A - Hunt Group Table Hunt Group ID Hunt Type 2 2 3 2 4 2 5 2 6 2 7 2 22 2 # of Dest
  • TRENDnet TVP-221H | User Guide - Page 52
    3 Local Port = 3 TVP-221H User's Guide 4 Local Port = 0 22 Remote Dest = 192.168.0.55/1720 TCP The above destination table has both local destinations and remote destinations. When the gateways are taken out of this initial testing L environment, and implemented in the field, the internet
  • TRENDnet TVP-221H | User Guide - Page 53
    11 2 TVP-221H User's Guide 1 11 Gateway B - Destination table Dest ID Mode 2 Local 3 Local 4 Local 11 H.323 Destination Port = 2 Port = 3 Port = 0 Dest = 192.168.0.20/1720 TCP The above destination table has both local destinations and remote destinations. When the gateways are
  • TRENDnet TVP-221H | User Guide - Page 54
    TVP-221H User's Guide The above process is the same for Gateway B phone 203 and 204 calls to Gateway A phone 201, 800 and 801. Case 2: Gateway Phone to PSTN Phone Gateway 1234 is ringing Receiver on 7777-1234 picks up VoIP Conversation VoIP Conversation The above dialing process is the same for
  • TRENDnet TVP-221H | User Guide - Page 55
    gateway. This will require the assistance of your PBX supplier and / or Systems Integrator. Please also see User's Guide for additional information. 5.6 VoIP the only service supported). Once you have registered an account, and have configured the DDNS client in the TVP-221H, the TVP-221H will
  • TRENDnet TVP-221H | User Guide - Page 56
    4, PC Configuration). The TVP-221H supports auto MDIX so you do VoIP (Free calls to remote site extension) 3. Simplified dialing ensures easy, direct access to remote extensions. 4. Simplified dialing makes remote offices and branches feel like local extensions. Two TVP-221H Gateways (Both Gateways
  • TRENDnet TVP-221H | User Guide - Page 57
    TVP-221H User's Guide TVP-221H configuration (ADSL PPPoE connection) on site A Web Configuration Telnet / Default Username and Password are "admin" and "123" respectively. Console Connect RS-232 to TVP-221H and PC Open Hyper Terminal Input parameters: Baud rate 19,200 Number of data bit 8
  • TRENDnet TVP-221H | User Guide - Page 58
    TVP-221H User's Guide Enter "telnet 192.168.0.1" Enter Username "admin" Enter "123" Web Configuration you could choose to reboot. Enter "net reset" Using a RJ45 Cat 5 cable, connect your TVP-221H directly to your ADSL / Cable Modem and initiate new Telnet session from a PC with internet Access:
  • TRENDnet TVP-221H | User Guide - Page 59
    or IP address (eg. tvp2.dyndns.org) c. Click on "OK" Dial Plan Settings / Store Dial Plan 16. Click on "Store" 17. Click on "Yes" TVP-221H User's Guide atpm dadd dns (eg. 22 dns tvp2.dyndns.org) atpm done atpm store Changes to network settings require rebooting to take
  • TRENDnet TVP-221H | User Guide - Page 60
    TVP-221H User's Guide Web Configuration of Internet Access Internet Access / DHCP Client 24. Select setting up the dial plan. However you could choose to reboot, Enter "net reset" connect your TVP-221H directly to your ADSL / Cable Modem and reconnect from a PC with Internet Access Enter "telnet
  • TRENDnet TVP-221H | User Guide - Page 61
    Click on "Store" 39. Click on "Yes" TVP-221H User's Guide atpm hadd 11 2 11 atpm dadd TVP-221H via web browser user interface or T1elnet. 5.8 (NAT) router with built-in DDNS client Case 5: Gateway Prefix-Simplified Gateway Phone to Gateway Phone A major consideration in NAT to NAT VoIP
  • TRENDnet TVP-221H | User Guide - Page 62
    TVP-221H User's Guide TVP-221H can be configured with a Router. In this example is also in the same LAN segment.. See Chapter 4 for more information. The TEW-431BRP and the TVP-221H both support auto-MDIX so a Standard Cat 5 cable will be sufficient. Network Configuration In this case application,
  • TRENDnet TVP-221H | User Guide - Page 63
    TVP-221H User's Guide 3. Enter username / password and domain name (hostname) as registered with www.dyndns.org 4. Click on Save, and wait a few seconds to verify if DDNS service 's user's manual for DDNS feature explanation and configuration Note: Please note that DDNS client in TVP-221H is not
  • TRENDnet TVP-221H | User Guide - Page 64
    the device and check enable 7. Click on Save TVP-221H User's Guide Note: Defining your own Virtual Servers If the the selected Server are shown in the "Properties" area. Use this to Enable or Disable support for this Server, as required. If Enabled, any incoming connections will be forwarded to
  • TRENDnet TVP-221H | User Guide - Page 65
    Properties Enable PC TVP-221H User's Guide Use this to Enable or Disable support for DMZ, as required. If Enabled, any incoming Configuration Internet Access / Fixed IP Menu: =>Enter IP Subnet Mask Default Gateway Home Console / Telnet net set ip: to setup IP net set mask: to setup IP
  • TRENDnet TVP-221H | User Guide - Page 66
    VoIP (Free calls to remote site extension) 3. Simplified dialing ensures easy, direct access to remote extensions. 4. Simplified dialing makes remote offices and branches feel like local extensions. Network Deployment Two TVP-221H Gateways (Both Gateways are set up with default settings) 1. TVP-221H
  • TRENDnet TVP-221H | User Guide - Page 67
    TVP-221H User's Guide TVP-221H configuration (ADSL PPPoE connection) on site A Web Configuration Telnet / 168.0.20, Subnet Mask(255.255.255.0), Default Gateway 192.168.0.254. 3. Click on 'Save" Once Internet Access is setup, you could choose to reboot the TVP-221H, and then use a PC in the same
  • TRENDnet TVP-221H | User Guide - Page 68
    TVP-221H User's Guide Web Configuration of Dial Plan Dial Plan Settings / Dialplan Table Setup 4. Select "Add" or tvp1.dyndns.org, to gain remote access via the Internet. TVP-221H configuration (cable connection) on site B Web Configuration Telnet / Console Local (from PC in same Segment
  • TRENDnet TVP-221H | User Guide - Page 69
    Password are "admin" and "123" respectively. TVP-221H User's Guide Connect RS-232 to TVP-224HR and PC Open Hyper Terminal Input parameters: (255.255.255.0), Default Gateway 192.168.0.254 2. Click on "Save" Once Internet Access is setup, you could choose to reboot the TVP-221H, and then use a
  • TRENDnet TVP-221H | User Guide - Page 70
    TVP-221H User's Guide Web Configuration of Dial Plan Dial Plan Settings / Dial plan Table Setup 3. Select "Add" and "Telephone 4. Enter following fields r. Telephone Number:11 s. Hunt Group ID:
  • TRENDnet TVP-221H | User Guide - Page 71
    Case 6: PLAR (Hotline) FXO to FXS example TVP-221H User's Guide Site A Site B This could be a call placed from to pre-determined remote destination. Solution: Set up hotline (PLAR) on TVP Gateway on Site A to TVP Gateway on Site B. This uses existing default local dial plan with the addition
  • TRENDnet TVP-221H | User Guide - Page 72
    TVP-221H User's Guide Site A TVP Gateway configuration - FXO to FXS PLAR Web Configuration Telnet / Console Login in to Site A TVP Gateway (a number that tells the ATPM to forward to a remote destination) address entry in TVP GW A for TVP GW B atpm hadd 22 2 22 atpm dadd 22 h323 192.168.0.55 atpm
  • TRENDnet TVP-221H | User Guide - Page 73
    TVP-221H User's Guide Site A FXO 201 Site B Case Scenario: Caller on Site B could dial any Site A local PSTN number Caller on Site B FXS 203 wants to be able to pick up phone and immediately have dial tone to Site A local PSTN. Solution: Set up hotline (PLAR) on TVP Gateway on Site B to TVP
  • TRENDnet TVP-221H | User Guide - Page 74
    TVP-221H User's Guide Site B TVP Gateway Configuration - FXS to FXO PLAR Web Configuration Telnet / Console Login to Site A TVP Gateway 1. Logon to the Web Configuration by opening your browser 2. Enter 192.168.0.55 3. You will be prompted for Username and Password. Default Username and Password
  • TRENDnet TVP-221H | User Guide - Page 75
    TVP-221H User's Guide Site A FXO (201) FXO (201) Site B Case Scenario: Caller Set up hotline (PLAR) on TVP Gateway on Site A Usage: Caller on Site A picks up any PBX extension and dials extension 201. TVP Gateway A automatically establishes a connection with TVP Gateway B Port 0, FXO 201 to
  • TRENDnet TVP-221H | User Guide - Page 76
    Web Configuration TVP-221H User's Guide Telnet / Console Login to Site A TVP Gateway 1. Logon to the Web Configuration by on Yes atpm req atpm aadd 22 5 5 22 2 Liness 3-12 create an address entry for TVP Gateway B atpm hadd 22 2 22 atpm dadd 20 h323 192.168.0.55 atpm done atpm store set tcid
  • TRENDnet TVP-221H | User Guide - Page 77
    Chapter 6 TVP-221H User's Guide 6 Connection Considerations This section discusses the special connection consideration for various environments and situations where you can use the VoIP Gateway. 6.1 Port Configuration VoIP Gateway supports FXS and FXO ports. FXS (Foreign Exchange Station) FXS
  • TRENDnet TVP-221H | User Guide - Page 78
    Application 1: Special FXS Connections TVP-221H User's Guide The following diagram illustrates two different types of connections. The SITE A FXS Connection shows the normal connection between a gateway and telephone set (POTS) or FAX machine. The other type of FXS connection is shown on SITE B,
  • TRENDnet TVP-221H | User Guide - Page 79
    TVP-221H User's Guide 1 7 Troubleshooting Tips This section provides solutions for problems you may possibly encounter while installing and connecting your VoIP Gateway between phone set and line port There is an out-of-service tone when dialing destination phone number 1. Check the dial plan
  • TRENDnet TVP-221H | User Guide - Page 80
    , Ethernet port and GW IP setting) is connected correctly 3. Check the destination TVP-221H and phone is available Final Steps If the procedures in this section have not solved the problem, reset the gateway by turning the power on and off. If the problem still exists, contact customer support. 80
  • TRENDnet TVP-221H | User Guide - Page 81
    Specifications TVP-221H Technical Specifications Telephony Interface Physical interface Programmable line interfaces Desktop with 4 Analog Ports • Loop start 2 x FXO (RJ-11) • Loop start 2 x FXS (RJ-11) Complex line impedance Protocols H.323v3 (Normal/fast-start mode) Supports gateway-gateway
  • TRENDnet TVP-221H | User Guide - Page 82
    TVP-221H User's Guide Telephony Line Module Specifications FXO Ports Signaling Number of channels Interface connectors Line impedance Insertion loss Frequency response Return loss Input level adjustment Output attenuation
  • TRENDnet TVP-221H | User Guide - Page 83
    TVP-221H User's Guide Console Port The console port uses a DB-9 RS-232 connector. The supplied straight through RS-232 cable connects the console port of the TVP-221H to a console PC or terminal. Pin assignment for the port is described in the following table. DB-9 pin 1 2 3 4 5 6 7 8 9 Signal Not
  • TRENDnet TVP-221H | User Guide - Page 84
    TVP-221H User's Guide FXO Port Pin Assignments The FXO Telephony Interface Module has 2 RJ11C/W modular jacks. The following diagram and table show the assignments of the pin for
  • TRENDnet TVP-221H | User Guide - Page 85
    TVP-221H User's Guide The console port uses a DB-9 RS-232 connector. The supplied straight through RS232 cable connects the console port of the TVP-221H to a console PC or terminal. Task Connect RS-323 Cable to TVP-221H RS-232 console port a your computer that you will use as a configuring terminal
  • TRENDnet TVP-221H | User Guide - Page 86
    TVP-221H User's Guide ping (xxx.xxx.xxx.xxx): 56 data bytes xxx.xxx.xxx.xxx is address. If you confirm that you do not have Internet Access, please refer to the trouble shooting section of the User Manual or consult your ISP to make sure your Internet Access Data is correct and accurately entered
  • TRENDnet TVP-221H | User Guide - Page 87
    is visible on the internet (See User Guide for More Information). Alternatively, you can use Telnet to locally access the TVP-221H, if you are under a router or switch and the TVP-221H and your computer are in the same network segment. To access the TVP-221H Gateway from a remote location / or from
  • TRENDnet TVP-221H | User Guide - Page 88
    TVP-221H User's Guide Appendix D - CLI Commands Normal Mode Commands Command atpm aadd atpm adel atpm afind atpm alist atpm dadd atpm ddel atpm dfind atpm dlist atpm hadd
  • TRENDnet TVP-221H | User Guide - Page 89
    show hwstat ping show h323 show version set h323 tel show tel_id tel show port tel show ring_freq tel set tel_id tel set ring_freq TVP-221H User's Guide Set default gateway's IP address Turn on/off HTTP server Set IP address Set IP precedence bits Set IP subnet mask Select Ethernet link speed Set
  • TRENDnet TVP-221H | User Guide - Page 90
    settings of certain parameters before the TVP-221H is shipped. Parameter Network Default Setting PPPoE disabled DYN DNS disabled DHCP client disabled Configured IP address 192.168.0.1 Configured IP subnet mask 255.255.255.0 Default gateway IP address 0.0.0.0 Current active IP address
  • TRENDnet TVP-221H | User Guide - Page 91
    h323 h245_tunneling h323 cisco_t38 h323 callSignalPort h323 call_name h323 local_alert h323 default_dtmf h323 gk_mode h323 h245_timeout h323 term_id h323 refresh TVP-221H User's Guide Off Off Off On 1720 None Off H323 V2 Signal Off 30000 None 120 Voice codec Preferred voice codec Telephony
  • TRENDnet TVP-221H | User Guide - Page 92
    F - Worksheets TVP-221H User's Guide IP Parameters Consult your network manager to obtain a static IP address for the TVP-221H, and the information about the IP subnet mask and the default gateway for your network. Fill out the following work sheet before configuring the TVP-221H. IP address IP
  • TRENDnet TVP-221H | User Guide - Page 93
    TVP-221H User's Guide Remote Destinations Each remote TVP-221H to be reached must be assigned a unique destination ID. Obtain the IP addresses of the TVP-221H at remote sites and fill out the worksheet for remote destinations by designating each remote TVP-221H a unique destination ID, then use the
  • TRENDnet TVP-221H | User Guide - Page 94
    ATPM Hunt Group Table TVP-221H User's Guide Several destinations may be grouped together to form a hunt group. When an incoming phone number matches the phone number of the hunt group, the TVP221H
  • TRENDnet TVP-221H | User Guide - Page 95
    TVP-221H User's Guide ATPM Address Table Each phone number to be recognized by the TVP-221H must have its first digits match an entry in the address table. Fill out the address table worksheet and use the CLI command atpm aadd
  • TRENDnet TVP-221H | User Guide - Page 96
    80 DTMF Relay 18 TVP-221H User's Guide Dynamic DNS 26 E Endpoint Prefix 30 F Factory Default Settings 86 Firmware Version 23 First Digit PLAR 69 G Gate Keeper 29, 30 Gate Keeper Address 30 GateKeeper ID 30 Gateway 10 H H.323 4, 16 H.323 Configuration 27 H.323 Parameters 28 Help 42
  • TRENDnet TVP-221H | User Guide - Page 97
    33 System Status 23 T TCID 4 Technical Specifications 80 Terminal ID 30 Terminal Type 28 Termination Digit 38 TFTP 4 TIM 4, 16 TVP-221H User's Guide Time To Live 30 Tips 78 TNV 4 Total Time 38 Troubleshooting 78 U UDP 4, 80 User name 21 UTP 4 V VAD 4, 10 VoIP 10 W WAN 4 97
  • TRENDnet TVP-221H | User Guide - Page 98
    TVP-221H User's Guide Limited Warranty TRENDware warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TVP-221H for any software, firmware, information, or in the manual. Warranty service may be
  • TRENDnet TVP-221H | User Guide - Page 99
    TVP-221H User's Guide INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE,
  • TRENDnet TVP-221H | User Guide - Page 100
    TVP-221H User's Guide 100
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100