Timex T609T User Manual - Page 17
Troubleshooting
View all Timex T609T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Troubleshooting PROBLEM The alarm does not sound The alarm sounds at an incorrect time Buzzer alarm is heard when waking to CD There is no display and the CD/radio will not play CD skips while playing POSSIBLE CAUSE • The alarm was not set correctly for AM/PM • Alarm icons are not on the display • The wrong alarm icon was on the display • The alarm was not set correctly for AM/PM • A CD was not inserted into the CD player • The CD was inserted incorrectly into the player • Compartment CD player door is not closed • The unit is disconnected from an AC outlet • The AC outlet has no power • The AC outlet is controlled by a wall switch that is off • Dirty or defective disc • Dirty lens REMEDY • Check the alarm time setting • Press the Alarm Button until the Alarm icon appears on the display • Make sure the alarm you wish to wake to is the only Alarm icon that appears on the display • When waking to CD, always make sure a CD has been inserted • Always insert the CD with the label surface facing up • Push down gently until the door is completely closed • Connect to an AC outlet • Try the unit on another outlet • Do not use an outlet that is controlled by a wall switch • Check the bottom of the disc and clean if necessary with a soft cleaning cloth, always wipe from the center out • Clean with a commercial lens cleaner If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service, 1-800-888-4491 16