Toshiba 32C110U User Manual - Page 16

Connecting an HDMI, or DVI, device to the HDMI input - set up

Get Toshiba 32C110U PDF manuals and user guides View all Toshiba 32C110U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Chapter 2: Connecting your TV Connecting an HDMI® or DVI device to the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-Dcompliant[1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 56.Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz Note: To connect a PC to the HDMI input, see page 19. To connect an HDMI device, you will need: • One HDMI cable (type A connector) per HDMI device −− For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). −− To display an 1080p/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly. −− HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration). −− See "Setting the HDMI ® audio mode" ( page 26). TV back panel Side panel Only for G310U HDMI device To view the HDMI device video: Select the HDMI 1, HDMI 2 or HDMI 3 (only G310U) video input source on the TV.* ** To select the video input source, press remote control ( page 21). on the To connect a DVI device, you will need: • One HDMI-to-DVI adapter cable −− For proper operation, the length of an HDMIto-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). • One 3.5mm stereo to RCA Y-cable −− An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration). −− See "Setting the HDMI ® audio mode" ( page 26). TV back panel 1 DVI device VIDEO AUDIO L R IN IN OUT L R DVI / HDCP OUT Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: •• When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. •• When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
16
Chapter 2: Connecting your TV
Connecting an HDMI
®
or DVI
device to the HDMI input
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
source device, or uncompressed digital video from a
DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-
Bandwidth Digital-Content Protection) program
material in digital form from EIA/CEA-861-D-
compliant
[1]
consumer electronic devices (such as
a set-top box or DVD player with HDMI or DVI
output).The HDMI input can accept and display
VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz),
480p (60Hz), 720p (60Hz), 1080i (60Hz) and 1080p
(24Hz/60Hz) signal formats. For detailed signal
specifications, see page 56.Supported Audio format:
Linear PCM, sampling rate 32/44.1/ 48 kHz
Note:
To connect a PC to the HDMI input, see page 19.
To connect an HDMI device, you will need:
•
One HDMI cable (type A connector) per HDMI device
−
For proper operation, it is recommended that
you use an HDMI cable with the HDMI Logo
(
).
−
To display an 1080p/60Hz signal format, you
will need a Category 2 cable. Conventional
HDMI/DVI cable may not work properly.
−
HDMI cable transfers both video and audio.
Separate analog audio cables are not
required (see illustration).
−
See “Setting the HDMI
®
audio mode”
(
page 26).
HDMI device
TV back panel
To view the HDMI device video:
Select the HDMI 1, HDMI 2 or HDMI 3 (only
G310U) video input source on the TV.
*
*
To select the video input source, press
on the
remote control (
page 21).
To connect a DVI device, you will need:
•
One HDMI-to-DVI adapter cable
−
For proper operation, the length of an HDMI-
to-DVI adapter cable should not exceed 9.8 ft
(3m). The recommended length is 6.6 ft (2m).
•
One 3.5mm stereo to RCA Y-cable
−
An HDMI-to-DVI adapter cable transfers
video only. Separate analog audio cables
are required (see illustration).
−
See “Setting the HDMI
®
audio mode”
(
page 26).
1
VIDEO
AUDIO
L
R
R
L
OUT
IN
DVI/HDCP
OUT
IN
DVI device
TV back panel
Note:
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow these
procedures:
Only for
G310U
Side panel
•
When turning on your electronic components,
turn on the TV first
, and then the HDMI or
DVI device.
•
When turning off your electronic components,
turn off the HDMI or DVI device first
, and
then the TV.
[1]
EIA/CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-definition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.