Toshiba 32HL67 Owner's Manual - English
Toshiba 32HL67 - 32" LCD TV Manual
View all Toshiba 32HL67 manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba 32HL67 manual content summary:
- Toshiba 32HL67 | Owner's Manual - English - Page 1
Integrated High Definition LCD Television HIGH-DEFINITION TELEVISION 26HL67 32HL67 32HL67U 37HL67 42HL67 For an overview of steps for setting up your new TV, see page 9. Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High - Toshiba 32HL67 | Owner's Manual - English - Page 2
for the size and weight of this television. The use of any wall bracket other than a UL Listed wall bracket appropriate for the size and weight of this television for wall mounting this television could result in serious bodily injury and/or property damage. See "Removing the Pedestal Stand" (- page - Toshiba 32HL67 | Owner's Manual - English - Page 3
, take the following precautions: • ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire. • NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If - Toshiba 32HL67 | Owner's Manual - English - Page 4
is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center. 35) WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE! Never strike the screen with a sharp or heavy object. 36) • The LCD screen of - Toshiba 32HL67 | Owner's Manual - English - Page 5
to wall mount your LCD TV, always use a ULlisted wall bracket appropriate for the size and weight of the LCD TV (- page 2) : 1) CAUTION: Two people are required for installation. 2) Unplug and remove any cables and/or other component connectors from the rear of the TV. 3) Follow the instructions - Toshiba 32HL67 | Owner's Manual - English - Page 6
LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance. Note: Interactive video games that involve shooting a "gun" type of joystick at an on-screen target may not work with this TV - Toshiba 32HL67 | Owner's Manual - English - Page 7
30 Manually adding and deleting channels in the channel memory 30 Labeling channels 31 Setting the HDMI™ audio mode 32 Viewing the digital signal meter 33 Viewing the system status 33 Selecting the Power-On Mode 34 Chapter 6: Using the TV's features 35 Selecting the video input source - Toshiba 32HL67 | Owner's Manual - English - Page 8
LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • Three HDMI™ digital, high-definition multimedia interfaces 1080p input support (- page 17). • Two sets of ColorStream® HD high-resolution component video inputs - Toshiba 32HL67 | Owner's Manual - English - Page 9
devices. The yellow LED will blink until the TV goes into standby mode. When the TV is in standby mode, press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn the TV off or on - Toshiba 32HL67 | Owner's Manual - English - Page 10
side panel controls and connections Model 42HL67 is used in this manual for illustration purposes. TV top TV front POWER Right side panel 4 8 5 9 6 7 10 Control panel 3 1 2 1 Green and Yellow LEDs Green = Power indicator Yellow = Power-On Mode indicator (- "Selecting the Power-On Mode - Toshiba 32HL67 | Owner's Manual - English - Page 11
Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. Also see item 4. HDMI connection is necessary to receive 1080p signals. 9 Service port - For service use only. Used for updating the television's firmware. HDMI - Toshiba 32HL67 | Owner's Manual - English - Page 12
connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device's owner's manual. Component video cables come in sets of three and are for use with video devices with component - Toshiba 32HL67 | Owner's Manual - English - Page 13
white audio cable only. To view the antenna or Cable signal: Select the ANT video input source on the TV.* To view the VCR: Turn ON the VCR. Select the VIDEO 1 video input source on the TV.* * To select the video input source, press INPUT on the remote control (- page 21). To program the TV remote - Toshiba 32HL67 | Owner's Manual - English - Page 14
Cable box output is set to). Use the Cable box controls to change channels. To view the VCR: Turn ON the VCR. Select the VIDEO 1 video input source on the TV.* * To select the video input source, press INPUT on the remote control (- page 21). To program the TV remote control to operate other devices - Toshiba 32HL67 | Owner's Manual - English - Page 15
the VIDEO 1 video input source on the TV.* To record a TV program while watching a DVD: Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD-1 video input source on the TV* to view the DVD. * To select the video input source, press INPUT on the remote control (- page - Toshiba 32HL67 | Owner's Manual - English - Page 16
VIDEO 2 on the TV right side panel. Camcorder VIDEO AUDIO OUT L R VIDEO 2 inputs on TV right side panel To view the camcorder video: Select the VIDEO 2 video input source on the TV.* * To select the video input source, press INPUT on the remote control (- page 21). To program the TV remote control - Toshiba 32HL67 | Owner's Manual - English - Page 17
, turn off the HDMI or DVI device first, and then the TV. HDMI device VIDEO AUDIO L R IN IN OUT L R HDMI OUT To view the HDMI device video: Select the HDMI 1, HDMI 2, or HDMI 3 video input source on the TV.* * To select the video input source, press INPUT on the remote control (- page - Toshiba 32HL67 | Owner's Manual - English - Page 18
amplifier To control the audio: 1 Turn on the TV and the digital audio device. 2 Press Y on the TV's remote control and open the Audio menu. 3 Highlight Audio Setup and press T. LINE IN LR TV upper back panel Audio Digital Audio Selector Audio Settings Advanced Audio Settings Audio Setup 4 In - Toshiba 32HL67 | Owner's Manual - English - Page 19
formats or non-standard signals will not be displayed correctly. • To display the optimum picture, use the PC setting feature (- "Using the PC settings feature" on page 51). Note: • The PC audio input terminals on the TV are shared with the HDMI-1 analog audio input terminals (- page 52). • Some - Toshiba 32HL67 | Owner's Manual - English - Page 20
you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate: You can program the TV remote control so it will operate the other device (- pages 22-26). • Always remove batteries from the remote control if they are dead or if the remote control is not to - Toshiba 32HL67 | Owner's Manual - English - Page 21
here. For a complete list of the remote control's functions, see the remote control functional key chart (- page 23). 1 POWER turns the TV on and off. When the TV is on, the green LED indicator on the TV front will be illuminated. 2 PIC MODE selects the picture mode (- page 42). 3 SLEEP accesses - Toshiba 32HL67 | Owner's Manual - English - Page 22
device's original remote control. Point the remote control directly at the device. 16 17 18 19 1 POWER Turns the selected device on and off. 2 Channel Numbers (0-9) Press to directly access channels (as opposed to < ,). 3 +10 Press to directly access DVD chapters higher than 10. 4 TOP MENU Accesses - Toshiba 32HL67 | Owner's Manual - English - Page 23
TV. REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) POWER SLEEP PIC SIZE PIC MODE Power Sleep timer Picture size PIC MODE Power s TV s TV s TV Power s TV s TV s TV 1-9 Digit 1-9 Digit 1-9 Digit 1-9 0 Digit 0 Digit 0 Digit 0 100/-/+10 INPUT - (sub CH) TV/Video select --s TV - Toshiba 32HL67 | Owner's Manual - English - Page 24
receiver), AUX 1 (for a VCR or TV/VCR combo), or AUX 2 (for a DVD player or HTIB [home theater in a box]). 3 While holding down E, press the Channel Number buttons to enter the 3-digit code for your device. 4 To test the code, turn on the device, point the remote control at it, and press p. See - Toshiba 32HL67 | Owner's Manual - English - Page 25
remote control Remote control codes In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, use the device's remote control Star Trak STS Toshiba Uniden Zenith 020, - Toshiba 32HL67 | Owner's Manual - English - Page 26
remote control Craig Curtis Mathes Daewoo Daytron Denon Dimensia Electrohome Emerson Fisher Fuji Funai Garrard GE Go Video Signature 2000 Singer Sony STS Sylvania Symphonic Tandy Tashiko Tatung Teac Technics Teknika Toshiba Totevision Unitec Unitech Vector Research 054, 057, 062, 065, 068, 072 - Toshiba 32HL67 | Owner's Manual - English - Page 27
remote control or TV control panel. Icon Video Audio Preferences Locks Setup Item Mode Picture Settings Noise Reduction Game Mode Theater Settings Digital Audio Selector Audio Settings Advanced Audio Settings Audio Setup CC Selector Base CC Mode Digital CC Settings Input Labeling Channel Labeling - Toshiba 32HL67 | Owner's Manual - English - Page 28
S [Opens the Input Configuration menu] S [Start] S [Scans for new channels on ANT] S [Opens the Channel Add/Delete menu] S [Opens the Signal Meter menu] S [Opens the System Information screen] Navigating the menu system You can use the buttons on the remote control or TV control panel to access - Toshiba 32HL67 | Owner's Manual - English - Page 29
Sleep Timer PC Settings Power-On Mode Power-Saving 3 (A new set of Installation menu icons will appear, as shown below.) Open the Terrestrial menu, highlight Input Configuration, and press T. Installation Terrestrial Input Configuration Channel Program Channel Add/Delete Signal Meter 4 Press - Toshiba 32HL67 | Owner's Manual - English - Page 30
into the TV's memory.) To remove an Antenna source channel from the memory, you must manually delete it. • To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. • Programming channels when the antenna input is configured - Toshiba 32HL67 | Owner's Manual - English - Page 31
5: Setting up your TV To add a channel to the channel memory: Highlight the unchecked box next to the channel number you want to add, and then press T to check the box. To manually add digital subchannels on a physical channel: Use the Channel Numbers and the Dash (=) on the remote control to - Toshiba 32HL67 | Owner's Manual - English - Page 32
AMAXW AMC Clear All ANIMAL Done S3endD EEXIFT dExiet f 3 6 MNOmn o 6 9 WX Y Zw x y z 9 INPUT Space 4 Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software keyboard. 5 The highlighted character is entered after you either press - Toshiba 32HL67 | Owner's Manual - English - Page 33
Terrestrial Input Configuration Channel Program Channel Add/Delete Signal Meter 4 Press BbC c to select the antenna input and digital channel whose signal you want to check. Note: The physical digital channel number listed in the Signal Meter screen may not correspond to a virtual TV channel number - Toshiba 32HL67 | Owner's Manual - English - Page 34
mode to below 3W. As a result, it takes a bit longer to turn on. • Fast mode increases power consumption in standby mode. As a result, the TV will turn on quicker. While in Fast mode, the yellow LED on the TV front will be lit. To set the Power-On Mode feature: 1 Press Y, and open the Setup menu - Toshiba 32HL67 | Owner's Manual - English - Page 35
on the remote control and then press T to change the input; or c) Repeatedly press + on the remote control or TV control panel to change the input. The current signal source displays in the top right corner of the Input Selection screen. Input Selection 0 ANT 1 Video 1 2 Video 2 3 ColorStream HD1 - Toshiba 32HL67 | Owner's Manual - English - Page 36
Input Selection screen (with none of the inputs labeled as a specific device). The screen below right is an example of how you could label the inputs if you connected a VCR to VIDEO 1, Cable TV to VIDEO 2, a video recorder to ColorStream HD1, a DTV settop box to HDMI 1, a satellite/DSS set-top - Toshiba 32HL67 | Owner's Manual - English - Page 37
List is set to On and the Power-On Mode (- page 34) is in Fast mode, the channels and inputs stored in the list will be saved every power on/off cycle. When History List is set to Power Off Clear (On), the channels and inputs stored in the list will be cleared with every power on/off cycle of the TV - Toshiba 32HL67 | Owner's Manual - English - Page 38
list when a new channel or input is tuned. • If History List in the Channel Browser Setup is set to "Power Off Clear (On)," turning off the TV will clear the History List. Tuning to the next programmed channel To tune to the next programmed channel: Press < or , on the remote control or TV control - Toshiba 32HL67 | Owner's Manual - English - Page 39
program the way that looks best to you. You can save separate picture size preferences for each input on your TV. To select the picture size using the remote control: 1 Press I on the remote control. 2 While the Picture Size screen is open, you can do one of the following to select the desired - Toshiba 32HL67 | Owner's Manual - English - Page 40
than 1080i, 1080p, or 720p, "Native" will be grayed out in the Picture Size screen. • This mode is supported only for HDMI and ColorStream inputs. • Depending on the input signals, the border of the picture may be hidden, displayed in black, or noisy. A B C D E F G A B C D E F G TheaterWide - Toshiba 32HL67 | Owner's Manual - English - Page 41
Chapter 6: Using the TV's features Using the auto aspect ratio feature When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: • A 480i signal from the VIDEO 1, VIDEO 2, ColorStream HD-1, or ColorStream - Toshiba 32HL67 | Owner's Manual - English - Page 42
Tint reddish greenish Sharpness softer sharper * Back Light This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to 0. (Settings are stored in memory.) **DynaLight This function automatically strengthens the black - Toshiba 32HL67 | Owner's Manual - English - Page 43
the closed caption mode Base closed captions The closed caption mode has two options: • Captions-An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked "CC" in program guides). • Text-An on-screen display of information - Toshiba 32HL67 | Owner's Manual - English - Page 44
CC Settings CC1 Input Labeling CC2 Channel Labeling CC3 Menu Language English CC4 Channel Browser Setup T1 T2 3 Press B or b to select Closed Caption, and then press C or c to select the desired service. Closed Caption Audio CC 1 None 4 Press O. Adjusting the audio Muting the sound - Toshiba 32HL67 | Owner's Manual - English - Page 45
"SAP" appears on-screen when E is pressed. The MTS feature is not available when the TV is in VIDEO mode. To listen to stereo sound: 1 Press Y and open the Audio menu. 2 Highlight Audio Setup and press T. Audio Digital Audio Selector Audio Settings Advanced Audio Settings Audio Setup 3 In the MTS - Toshiba 32HL67 | Owner's Manual - English - Page 46
Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: • This item will be grayed out for NTSC signals, Video, ColorStream, and PC inputs. • The Dolby Digital Dynamic Range Control will function in relation to Optical - Toshiba 32HL67 | Owner's Manual - English - Page 47
Using the TV's features Using the Locks menu The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Channels Block, Input Lock, Front (control) Panel Lock, and New PIN Code features. You can use these features after entering the correct PIN code. Entering the PIN code 1 Press Y and - Toshiba 32HL67 | Owner's Manual - English - Page 48
then press T. Locks Enable Rating Blocking Off Off Edit Rating Limits On Channels Block Input Lock Off Front Panel Lock Off New PIN Code 6 Press b to highlight Edit Rating Limits and press T. The Edit Rating Limits screen (below) appears. 7 Press BbC c and then press T to select the level - Toshiba 32HL67 | Owner's Manual - English - Page 49
on the remote control. If it is rated "None," the word "NONE" appears in the RECALL screen (as shown below right). If rating information is not provided, no rating will appear in the RECALL screen. TV - PG L V NONE Blocking channels With the Channels Block feature, you can block specific channels - Toshiba 32HL67 | Owner's Manual - English - Page 50
the TV is turned on again. Locks Active Enter PIN code to temporarily unblock. **** Cancel Done Using the input lock feature You can use the Input Lock feature to lock the video inputs (VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream HD-2, HDMI 1, HDMI 2, HDMI 3 and PC) and channels 3 and - Toshiba 32HL67 | Owner's Manual - English - Page 51
Channels Block Input Lock Front Panel Lock New PIN Code Off Off Off Off On To unlock the control panel: Highlight Off in step 5 above, or press and hold the VOLUME - button on the TV control panel for about 10 seconds until the volume icon appears. Setup Installation Sleep Timer PC Settings Power - Toshiba 32HL67 | Owner's Manual - English - Page 52
and "Setting the HDMI™ Audio mode" on page 32.) Setting the sleep timer You can set the sleep timer to turn off the TV after a set length of time (maximum of 180 minutes). To set the sleep timer using the remote control: Press [ on the remote control to set the length of time until the TV turns off - Toshiba 32HL67 | Owner's Manual - English - Page 53
SAP audio status (when HDMI input mode, Dolby Digital or PCM) • Video resolution • Aspect ratio of incoming video signal (4:3 or 16:9) • V-Chip rating status ANT 123-456 ABCHD Stereo SAP 1080i 16:9 TV-PG L V 9:00pm . Understanding the auto power off feature The TV will automatically turn itself - Toshiba 32HL67 | Owner's Manual - English - Page 54
1 Press Y and open the Video menu. 2 Highlight Picture Settings and press T. Video Mode Picture Settings Noise Reduction Game Mode Theater Settings Sports Off 3 Highlight Advanced Picture Settings and press T. Picture Settings Contrast 100 Back Light 100 DynaLight Brightness 50 Color 50 - Toshiba 32HL67 | Owner's Manual - English - Page 55
your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc. To change the CableClear settings: 1 Press Y and open the Video menu. 2 Highlight Noise Reduction and press T. Video Mode Picture Settings Noise - Toshiba 32HL67 | Owner's Manual - English - Page 56
select On. Video Mode Picture Settings Noise Reduction Game Mode Theater Settings Sports Off Off On To turn off Game Mode: Select Off in step 2 above, change the video input, or turn the TV off and then on again. Note: You can change the video input by pressing + on the remote control (- page 35 - Toshiba 32HL67 | Owner's Manual - English - Page 57
sound experience with deep, rich bass from stereo sound sources. Your TV's audio will sound fuller, richer, and wider. To adjust the WOW™ settings: 1 Put the TV Audio Settings WOW: SRS 3D WOW: SRS Focus WOW: SRS TruBass Reset Off Off Low Done • WOW: SRS 3D - To turn the surround sound effect - Toshiba 32HL67 | Owner's Manual - English - Page 58
watching an analog channel (off-air broadcast or Cable TV), you can set the CableClear®/DNR feature to AUTO to reduce visible interference in the TV picture (- page 55). Video Input Selection problems • If the Input Selection window does not appear when you press + on the remote control or TV, press - Toshiba 32HL67 | Owner's Manual - English - Page 59
8: Troubleshooting • Your TV remote control may not operate certain features on your external device. Refer to the owner's manual for your other device to determine its available features. If your TV remote control does not operate a specific feature on another device, use the remote control that - Toshiba 32HL67 | Owner's Manual - English - Page 60
yellow LED stops blinking. Turn OFF the TV and unplug the power cord. Plug the power cord in again and turn ON the TV. If, after trying the solutions, the problem still exists: • In the U.S., call TACP Consumer Solutions at 1-800-575-5469. • In Canada, locate the nearest Toshiba authorized service - Toshiba 32HL67 | Owner's Manual - English - Page 61
.0 kg) 42HL67: 59.5 lbs (27.0 kg) Operating conditions Temperature: 32ºF - 95ºF (0ºC - 35ºC) Humidity: 20 - 80% (no moisture condensation) Supplied Accessories • Remote control with two size "AAA" batteries • Owner's manual (this book) • Lead clip Use this clip to attach the TV to a wall, pillar, or - Toshiba 32HL67 | Owner's Manual - English - Page 62
OR REFURBISHED PART WITHOUT CHARGE TO YOU. Owner's Manual and Product Registration Card Read this owner's manual thoroughly before operating this LCD Television. Complete and mail the enclosed product registration card or register your LCD Television online at www.tacp.toshiba.com/service as soon - Toshiba 32HL67 | Owner's Manual - English - Page 63
to the Television; h. Service of a Television on which the TOSHIBA label or logo, rating label or serial number have been defaced or removed; i. On-site service and repair of the Television; and j. Damage to the Television caused by failure to follow the specifications, User manuals or guides as to - Toshiba 32HL67 | Owner's Manual - English - Page 64
source code. A copy of the LGPL source code in this product may be obtained by contacting Toshiba PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts - Toshiba 32HL67 | Owner's Manual - English - Page 65
receiver connection 15 Scroll settings 40 Selecting Menu Language 29 Service 4 Side panel control 10 Sleep timer 52 Specifications 61 StableSound 46 Stereo sound 45 SurfLock 38 S-video cable 12 System status 33 T TheaterWide® picture size 39 Troubleshooting 58 TV status information 53 - Toshiba 32HL67 | Owner's Manual - English - Page 66
V6V 2L1, CANADA - TEL: (604) 303-2500 MANUFACTURED BY CableClear, ColorStream, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. Channel Browser, SurfLock, and DynaLight are trademarks of Toshiba America Consumer Products, L.L.C. REGZA is a trademark
HIGH
-DEFINITION TELEVISION
26HL67
32HL67
32HL67U
37HL67
42HL67
YC/M1
VX1A000401A0
Integrated High Definition
LCD Television
© 2007 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back of
your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
For an overview of steps for setting up your new TV, see page 9.
Note: To display a High Definition picture, the TV must be receiving a
High Definition signal (such as an over-the-air High Definition TV
broadcast, a High Definition digital cable program, or a High Definition
digital satellite program). For details, please contact your TV antenna
installer, cable provider, or satellite provider.