Toshiba 40E200U2 Owners Manual
Toshiba 40E200U2 Manual
 |
View all Toshiba 40E200U2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba 40E200U2 manual content summary:
- Toshiba 40E200U2 | Owners Manual - Page 1
digital satellite program). For details, please contact your TV antenna installer, cable provider, or satellite provider. © 2010 TOSHIBA CORPORATION All Rights Reserved Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer - Toshiba 40E200U2 | Owners Manual - Page 2
Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual user to the presence of important operating and maintenance (servicing) instructions supported on the proper stands Follow all instructions supplied by the - Toshiba 40E200U2 | Owners Manual - Page 3
during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the - Toshiba 40E200U2 | Owners Manual - Page 4
added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time. 39) ALWAYS unplug the TV to completely disconnect from mains power. When the TV is turned off using the - Toshiba 40E200U2 | Owners Manual - Page 5
40) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center. 41) DANGER: RISK OF SERIOUS - Toshiba 40E200U2 | Owners Manual - Page 6
all four screws, holding the pedestal stand in place, remove the pedestal stand from the TV. 40" TV VESA Mounting Pattern Four screws Hook Sturdy strap (as short as possible) CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To - Toshiba 40E200U2 | Owners Manual - Page 7
): The Toshiba 40E200U2, and used in accordance with the instructions, may cause harmful interference to determined by removing and applying power to the equipment, the user is encouraged to try to Toshiba could void the user's authority to operate this equipment. Important notes about your LCD TV - Toshiba 40E200U2 | Owners Manual - Page 8
range 20 Learning about the remote control 21 Chapter 4: Menu layout and navigation 22 Main menu layout 22 Setup/Installation menu layout 23 Navigating the menu system 23 Chapter 5: Setting up your TV 24 Initial Setup 24 Selecting the menu language 24 TOSHIBA Logo LED 24 Configuring the - Toshiba 40E200U2 | Owners Manual - Page 9
Toshiba widescreen, integrated HD, LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution. • Four HDMI® digital, high-definition multimedia interfaces 1080p input support the TV remote via - Toshiba 40E200U2 | Owners Manual - Page 10
all cables and devices, plug in the power cords for your TV and other devices. Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn the TV off or on, please unplug the - Toshiba 40E200U2 | Owners Manual - Page 11
Model 40E200U2 is used in this manual for illustration purposes. Left side panel TV front 3 7 4 8 5 6 9 10 TV top 11 12 2 Control panel 1無 Green LED and TOSHIBA Logo LED Power LED(Green) = Power indicator TOSHIBA Logo LED= On or Off ( page 24). 2無 Remote sensor - Point the remote - Toshiba 40E200U2 | Owners Manual - Page 12
types and connections, see pages 13-19. TV back 1 2 3 Power Cord 4 76 5 1無 PC IN Antenna input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. component video output, such as a Toshiba DVD player with ColorStream®. Note: - Toshiba 40E200U2 | Owners Manual - Page 13
is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV. Standard A/V cables (red/white/yellow) manual. Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream® is Toshiba - Toshiba 40E200U2 | Owners Manual - Page 14
box, you may not be able to use the remote control to program or access certain features on the TV. To view the antenna or Cable signal: Select the ANT/CABLE video input source on the TV.* To view basic and premium Cable channels: Turn OFF the VCR. Select the ANT/CABLE video input - Toshiba 40E200U2 | Owners Manual - Page 15
provide the best picture performance (1080p is not supported). −− If your DVD player or satellite receiver Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD video input source on the TV* to view the DVD. ** To select the video input source, press INPUT on the remote - Toshiba 40E200U2 | Owners Manual - Page 16
signal specifications, see page 57. Supported Audio format: Linear PCM, sampling TV.* ** To select the video input source, press INPUT on the remote turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. •• When turning off your electronic components, turn - Toshiba 40E200U2 | Owners Manual - Page 17
TV's remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see page 49. TV to models incorporating Toshiba's REGZA-LINK. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for - Toshiba 40E200U2 | Owners Manual - Page 18
digital audio system TV back panel To control the audio: 1無 Turn on the TV and the digital audio device. 2無 Press on the TV's remote control and open a PC, set the monitor output resolution on the PC before connecting it to the TV. The PC IN terminal can accept and display VGA, SVGA, XGA, WXGA and - Toshiba 40E200U2 | Owners Manual - Page 19
audio input terminals ( page 44). •• Some PC models cannot be connected to this TV. •• An adapter is not needed for computers with an HDMI cable (type A connector). Separate analog cables are not necessary ( page 16). TV back panel Note: •• The edges of the images may be hidden. •• If receiving - Toshiba 40E200U2 | Owners Manual - Page 20
effective range For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remote control and the TV. Point remote control toward remote sensor on front of TV. 3無 Reinsert the battery cover in the remote control until the tab snaps. Caution - Toshiba 40E200U2 | Owners Manual - Page 21
remote control Learning about the remote control The buttons used for operating the TV only are described here. Note: The error message "NOT AVAILABLE" may appear if you press a key for a function that is not available. 1無 POWER turns the TV on and off. When the TV accesses the main TV menu system - Toshiba 40E200U2 | Owners Manual - Page 22
of your TV's menu system. To open the main menus (illustrated below), press on the remote control or TV control [Opens the Installation menu ( page 23)] Enable REGZA-LINK / TV Auto Input Switch / TV Auto Power / Device Auto Standby / Speaker Preference [Opens the Sleep Timer - Toshiba 40E200U2 | Owners Manual - Page 23
is receiving. This is not a sign of malfunction. • When a menu is open, use the up/down/left/right arrow buttons (pqtu) on the remote control or TV control panel to move in the corresponding direction in the menu. • Press to save your menu settings or select a highlighted item. (A highlighted menu - Toshiba 40E200U2 | Owners Manual - Page 24
process, the Initial Setup window will appear every time you turn on the TV. Selecting the menu language You can choose from three different languages 2無 Press t or u to select your preferred menu language. TOSHIBA Logo LED You can select TOSHIBA Logo LED either On or Off. 1無 Press and open the - Toshiba 40E200U2 | Owners Manual - Page 25
TV Programming channels into the TV's channel memory When you press or on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV's channel memory. Follow the steps below to program channels into the TV your Cable TV service lineup changes - Toshiba 40E200U2 | Owners Manual - Page 26
5: Setting up your TV To add a channel to the channel memory: Highlight the checked box next to the channel number you want to add, and then press to remove the tick. To manually add digital subchannels on a physical channel: Use the Channel Numbers and the Dash ( ) on the remote control to enter - Toshiba 40E200U2 | Owners Manual - Page 27
. Setting the time zone The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV status information to show the correct time zone information ( page 50). To set the time zone: 1無 From the Setup menu, highlight Installation and press . A new - Toshiba 40E200U2 | Owners Manual - Page 28
scroll through the menu bar to select the Factory Defaults or Support Information and view the related information. To close the screen and appear, select Yes and press , the TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again - Toshiba 40E200U2 | Owners Manual - Page 29
(e.g. Audio Receiver) is connected to the HDMI input: Press on the remote or TV control panel repeatedly to highlight HDMI 1, HDMI 2, HDMI 3 or HDMI from the popup window using , some REGZA- LINK devices may automatically turn on. ••When selecting input sources using , you will have to - Toshiba 40E200U2 | Owners Manual - Page 30
in the Input Selection screen and skipped over when you press on the remote control. 5無 To save the new input labels, highlight Done and press of how you could label the inputs if you connected a VCR to VIDEO 1, Cable TV to VIDEO 2, a video recorder to ColorStream HD, a DTV set-top box to HDMI - Toshiba 40E200U2 | Owners Manual - Page 31
Off. Note: History List will be cleared every time the TV is powered off. 4無 Press to highlight ANT/CABLE List, and Browser™: • Press or on the remote control. • Press to surf backward through turned off, pressing , , or will not display the Channel Browser™. If Favorites List is turned - Toshiba 40E200U2 | Owners Manual - Page 32
from the list when a new channel or input is tuned. • Turning off the TV will clear the History List. Setting the Channel Tuning Mode This feature channels will have priority when manually entering a channel number using the Channel Number (0-9) on the remote control, analog channels can still - Toshiba 40E200U2 | Owners Manual - Page 33
program the way that looks best to you. You can save separate picture size preferences for each input on your TV. To select the picture size using the remote control: 1無 Press on the remote control. 2無 While the Picture Size screen is open, you can do one of the following to select the desired - Toshiba 40E200U2 | Owners Manual - Page 34
Chapter 6: Using the TV's features To select the picture size using the menus: 1無 Select Picture Size in the Theater Settings menu. 2無 Press or to select the desired picture size - Toshiba 40E200U2 | Owners Manual - Page 35
HD sources such as DVHS movies, or PC graphics. Note: ••This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and feature When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources - Toshiba 40E200U2 | Owners Manual - Page 36
Chapter 6: Using the TV's features To turn on the auto aspect ratio feature: 1無 Press and open the , highlight Done and press . To revert to the factory defaults, highlight Reset and press . To turn off the auto aspect ratio feature: Select Off in step 3 above. Selecting the cinema mode When you - Toshiba 40E200U2 | Owners Manual - Page 37
narration, and sound effects of TV programs and videos that are closed captioned (usually marked "CC" in program guides). • Text-An on-screen display appear on screen. If this happens, set the Base CC Mode to Off. • To turn off the closed caption mode: Select Off in step 2 above. Note: A closed - Toshiba 40E200U2 | Owners Manual - Page 38
. 3無 Press or to select Closed Caption, and then press or to select the desired service. 4無 Press . Adjusting the audio Muting the sound Press on the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press , the mute mode will change in the - Toshiba 40E200U2 | Owners Manual - Page 39
features 3無 Press or to select Audio, and then press or to select the desired service. 4無 Press . Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second - Toshiba 40E200U2 | Owners Manual - Page 40
code to confirm it. 6無 Press . The new PIN code is now active. Note: PIN code cannot be set to "0000". Blocking TV programs and movies by rating (V-Chip) Some TV programs and movies include signals that classify the content of the program (violence, sex, dialog, language). The V-Chip feature in this - Toshiba 40E200U2 | Owners Manual - Page 41
available. ••The additional rating system is not designed, transmitted, or controlled by the TV or Toshiba, nor is the availability of an additional rating system determined or controlled by Toshiba. Similarly, the rating of programs in an additional rating system is not determined, transmitted - Toshiba 40E200U2 | Owners Manual - Page 42
Crude or indecent language S) Explicit sexual activity V) Graphic violence TV-14 Parents Strongly Cautioned (This program contains some material that . ••To display the rating of the program you are watching, press on the remote control. If it is rated "None," the word "NONE" appears in the - Toshiba 40E200U2 | Owners Manual - Page 43
appears. All locking is disabled until the TV is turned off, and will be enabled when the TV is turned on again. Using the input lock feature remain on the GameTimer. ••If the TV loses power with time remaining on the GameTimer, when power is restored the TV will enter Input Lock mode (as if - Toshiba 40E200U2 | Owners Manual - Page 44
panel is locked and any button on the control panel (except POWER) is pressed, the message "NOT AVAILABLE" appears. To unlock the control panel: Select Off in step 5 above, or press and hold the VOLUME - button on the TV control panel for about 10 seconds until the volume icon appears. Using - Toshiba 40E200U2 | Owners Manual - Page 45
TV directly. ••Do not use a USB Hub. ••You must obtain any required permission from copyright owners to use copyright content. Toshiba supported USB storage device to the USB port on the side of the TV 6 sec. Manually open: main menus cannot be displayed. (continued) 45 &6@&/OEJOEC - Toshiba 40E200U2 | Owners Manual - Page 46
Chapter 6: Using the TV's features Viewing photo files There are three types of files located in the selected directory shall be displayed. This view allows you to change the photo content manually. When moving from Multi View to the Single View, the currently selected photo shall be displayed. 1無 - Toshiba 40E200U2 | Owners Manual - Page 47
Chapter 6: Using the TV's features During playback • Press to pause. • To resume normal playback, press . • To locate a specific file, press or repeatedly. • To adjust volume , press / Note: During playback, - Toshiba 40E200U2 | Owners Manual - Page 48
the remote control: Press on the remote control to set the length of time until the TV turns off Highlight Done and press . Note: When a power failure occurs, the sleep timer setting may be and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote via HDMI connection ( page - Toshiba 40E200U2 | Owners Manual - Page 49
device starts playing video or audio, the TV will automatically switch to the appropriate HDMI input. TV Auto Power If a REGZA-LINK device is turned on, the TV turns on automatically. Device Auto Standby If the TV is turned off the TV will send a message to turn off all of the REGZALINK devices - Toshiba 40E200U2 | Owners Manual - Page 50
automatically turns on the TV when the power is resupplied. Note: If it's possible, and you will be away from the TV for an extended period of time you should unplug the power cord. To close the RECALL screen: Press again. To display TV status information using INFO: Press on the remote control - Toshiba 40E200U2 | Owners Manual - Page 51
Chapter 7: Using the TV's advanced features Using the advanced picture settings features Using Dynamic Contrast Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast - Toshiba 40E200U2 | Owners Manual - Page 52
menu, highlight the Game Mode. 2無 Press or to select On. To turn off Game Mode: Select Off in step 2 above, change the video input, or turn the TV off and then on again. Note: You can change the video input by pressing on the remote control ( page 29). 52 &6@&/OEJOEC - Toshiba 40E200U2 | Owners Manual - Page 53
regular stereo speakers. To adjust the QSound® settings: 1無 Put the TV in STEREO mode ( "Selecting stereo/SAP broadcasts" on page 39). Press or to highlight the QSound feature, and then press or to turn the QSound effect On or Off. 5無 To save the new settings, highlight Done and press - Toshiba 40E200U2 | Owners Manual - Page 54
again. Other problems •• If your TV's problem is not addressed in this Troubleshooting section or the recommended solution has not worked, use the Restore Factory Defaults procedure ( page 28). TV will not turn on •• Make sure the power cord is plugged in, and then press . •• The remote control - Toshiba 40E200U2 | Owners Manual - Page 55
of the device, turn off your TV and unplug the power cord, then plug and turn on again. •• If several devices are connected, REGZA-LINK feature may not operate properly. •• Read the instruction manual furnished with the connected REGZA-LINK device. HDMI problems For HDMI cables •• Make - Toshiba 40E200U2 | Owners Manual - Page 56
inches (295mm) Mass (Weight) 40E200U2/40E20U2: 35.3 lbs (16.0 kg) Operating conditions Temperature: 32ºF - 95ºF (0ºC - 35ºC) Humidity: 20 - 80% (no moisture condensation) Supplied Accessories • Remote control with two size "AAA" batteries • Owner's manual (this book) &6@&/OEJOEC - Toshiba 40E200U2 | Owners Manual - Page 57
PC, the following status may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV. Format VGA SVGA XGA WXGA SXGA Resolution 640 × 480 800 × 600 1024 × 768 1280 × 768 1360 × 768 1280 × 1024 V. Frequency 59.940Hz 60 - Toshiba 40E200U2 | Owners Manual - Page 58
IS" or "With known faults, defects or problems" are not covered by this limited warranty. instructions in this manual, review the section entitled "Concierge" located on our Customer Support Web site "www.tacp.toshiba. com/customersupport". If you find that service is needed, follow the instructions - Toshiba 40E200U2 | Owners Manual - Page 59
WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS: (1) You must provide your bill of sale or other proof of purchase. (2) All warranty servicing of this Television must be performed by a Toshiba Authorized Service Provider (ASP). (3) The warranties from TCL are effective only if the Television is - Toshiba 40E200U2 | Owners Manual - Page 60
; i. Damage to the Television caused by failure to follow the specifications, User manuals or guides as to usage and/or storage. j. Firmware updates that are posted to the Toshiba Support website and can be performed by the end user via a USB stick or SD card type media. Disclaimer and Limitation of - Toshiba 40E200U2 | Owners Manual - Page 61
or sale of, the Television, on the other hand, the provisions of this limited warranty shall prevail. How to Obtain Warranty Services If, after following all of the operating instructions in this manual, checked the "Troubleshooting" section, and have visited www.toshiba.ca/support for additional - Toshiba 40E200U2 | Owners Manual - Page 62
: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSHIBA OF CANADA LTD. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA - TEL: (905) 470-5400 SERVICE CENTERS: TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
 |
 |
For an overview of steps for setting up your new TV, see page10.
Note: To display a High Definition picture, the TV must be receiving
a High Definition signal (such as an over-the-air High Definition
TV broadcast, a High Definition digital cable program, or a High
Definition digital satellite program). For details, please contact
your TV antenna installer, cable provider, or satellite provider.
© 2010 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
HDA51C4020I
Owner’s Manual
Integrated High Definition
HIGH
-DEFINITION TELEVISION
LCD Television
40E200U
2
40E20U
2
C
M
Y
CM
MY
CY
CMY
K
40E200U2_EN-A5-Cover-0507.ai 2010/5/7 下午 01:17:57
40E200U2_EN-A5-Cover-0507.ai
2010/5/7
下午 01:17:57