Toshiba 40G300U1 Owners Manual

Toshiba 40G300U1 Manual

Get Toshiba 40G300U1 PDF manuals and user guides View all Toshiba 40G300U1 manuals
Add to My Manuals
Save this manual to your list of manuals

Toshiba 40G300U1 manual content summary:

  • Toshiba 40G300U1 | Owners Manual - Page 1
    cable provider, or satellite provider. © 2010 TOSHIBA CORPORATION All Rights Reserved Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model
  • Toshiba 40G300U1 | Owners Manual - Page 2
    Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual weight of this television for wall mounting this television could result in serious bodily injury and/or property damage. See "Removing the Pedestal Stand
  • Toshiba 40G300U1 | Owners Manual - Page 3
    , take the following precautions: • ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire. • NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If
  • Toshiba 40G300U1 | Owners Manual - Page 4
    ; or b) cables, wires, or any home theater component connected to an antenna or phone system. Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 34) If you use the TV in a room whose temperature is 32 °F (0 °C) or below, the picture
  • Toshiba 40G300U1 | Owners Manual - Page 5
    , press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 35 on page 4. Service 43) WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the TV yourself. Opening and removing the covers may
  • Toshiba 40G300U1 | Owners Manual - Page 6
    the pedestal stand to avoid damage to the LCD panel. 2) Remove the four screws shown in the right diagram. This will allow removal of the pedestal stand. 3) Once you have removed all four screws, holding the pedestal stand in place, remove the pedestal stand from the TV. 40" TV VESA Mounting
  • Toshiba 40G300U1 | Owners Manual - Page 7
    : Changes or modifications to this equipment not expressly approved by Toshiba could void the user's authority to operate this equipment. Important notes about your LCD TV The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore
  • Toshiba 40G300U1 | Owners Manual - Page 8
    an HDMI® or DVI device to the HDMI input.......... 16 REGZA-LINK® connection 17 Connecting a digital audio system 18 Connecting a personal computer (PC 18 Connecting a home network 19 To connect the TV to a home network 20 Chapter 3: Using the remote control 21 Preparing the remote control for
  • Toshiba 40G300U1 | Owners Manual - Page 9
    re watching ( page 32). • REGZA-LINK allows control of external devices from the TV remote via HDMI connection( page 56). • ClearFrame™ 120 Hz anti-blur feature ( page 60). • DLNA allows you to enjoy multimedia files from your home network on your TV. • Media Player allows you to view photo files
  • Toshiba 40G300U1 | Owners Manual - Page 10
    ). 9 AFTER connecting all cables and devices, plug in the power cords for your TV and other devices. Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn the TV off or on
  • Toshiba 40G300U1 | Owners Manual - Page 11
    = Power indicator TOSHIBA Logo LED= On or Off ( page 30). 2無 Remote sensor - Point the remote control toward this remote sensor ( "Remote control effective range" on page 21). 3無 POWER - Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV control
  • Toshiba 40G300U1 | Owners Manual - Page 12
    of cable types and connections, see pages 13-20. TV back 1 2 3 4 Power Cord 5 87 6 1無 LAN IN - LAN port is used to connect the TV to your home network. 2無 PC IN - For use when connecting a personal computer. 3無 HDMI® IN - High-Definition Multimedia Interface input receives digital audio and
  • Toshiba 40G300U1 | Owners Manual - Page 13
    from those illustrated herein. For details on connecting and using your specific devices, refer to each device's owner's manual. HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format. This
  • Toshiba 40G300U1 | Owners Manual - Page 14
    You will need: • coaxial cables • standard A/V cables −− If you have a mono VCR, connect L/MONO on the TV to your VCR's audio out terminal using the white audio cable only. • standard audio cables (If you have a mono VCR) Note: When you use a Cable box, you may not be able to use the remote control
  • Toshiba 40G300U1 | Owners Manual - Page 15
    (plus audio cables) from the DVD player or satellite receiver to the ColorStream terminal on the TV. The ColorStream HD terminal can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance (1080p is not supported
  • Toshiba 40G300U1 | Owners Manual - Page 16
    format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly. −− HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration). −− See "Setting the HDMI® audio mode" ( page 33). TV back panel Control panel HDMI device To
  • Toshiba 40G300U1 | Owners Manual - Page 17
    an explanation of setup and operations, see page 56. TV back panel Audio receiver Playback device (REGZA-LINK DVD player,etc.) Playback device (REGZA-LINK DVD player,etc.) To connect an Audio Receiver and Playback Devices, you will need: • HDMI cables ( page 13) Note: • If several devices are
  • Toshiba 40G300U1 | Owners Manual - Page 18
    audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "mini-optical" connector.) Dolby Digital decoder or other digital audio system TV back panel To control the audio: 1無 Turn on the TV and the digital audio device. 2無 Press on the TV's remote control
  • Toshiba 40G300U1 | Owners Manual - Page 19
    to display the entire picture within the borders of the screen (i.e. no overscanning). Connecting a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are
  • Toshiba 40G300U1 | Owners Manual - Page 20
    your TV To connect the TV to a home network the back of your TV Modem (DSL or Cable) Router with Hub DLNA server or Sever PC(with DLNA server function) [1] Coaxial or telephone cable (depending on your modem type) [2] Standard LAN cable [3] Do NOT connect a phone jack directly to the TV's LAN
  • Toshiba 40G300U1 | Owners Manual - Page 21
    Preparing the remote control for use Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is
  • Toshiba 40G300U1 | Owners Manual - Page 22
    the remote control's functions, see the remote control functional key chart ( page 24). Note: The error message "NOT AVAILABLE" may appear if you press a key for a function that is not available. 1無 POWER turns the TV on and off. When the TV is on, the green LED indicator on the TV front will be
  • Toshiba 40G300U1 | Owners Manual - Page 23
    the TV remote control is programmed, it may not operate certain features on any other devices. If this happens and you wish to use those features, you will need to use the device's original remote control. Point the remote control directly at the device. 16 17 18 19 1無 POWER Turns the selected
  • Toshiba 40G300U1 | Owners Manual - Page 24
    TV" = key will affect the TV, even though the remote control is in another mode. •• * Not available for your TV. REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) AUX 1 (VCR) AUX 2 (DVD or HTIB) POWER Power Power Power Power Power SLEEP Sleep timer TV TV TV TV PIC SIZE Picture
  • Toshiba 40G300U1 | Owners Manual - Page 25
    FWD* Angle* Sub title* Audio* Eject* CABLE --- SAT (satellite) --- AUX 1 (VCR) Record (2 click AUX 2 (DVD or HTIB) --- ----DVD Angle DVD Sub title DVD Audio DVD Eject Programming the remote control to control your other devices Your Toshiba TV remote control is preprogrammed to operate
  • Toshiba 40G300U1 | Owners Manual - Page 26
    TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, use the device's remote control. Cable Hitachi 033 Hughes 033 Hughes Network Systems 019 Intersat 048 Sony Sylvania Teac Technics Techwood Toshiba Yamaha Zenith 019 020 021
  • Toshiba 40G300U1 | Owners Manual - Page 27
    Chapter 3: Using the remote control Curtis Mathes 001, 005, 009, 012, 014, 040, 048, Sears Sharp Shintom Signature Signature 2000 Singer Sony STS Sylvania Symphonic Tandy Tashiko Tatung Teac Technics Teknika Toshiba Totevision Unitec Unitech Vector Research 054, 057, 062, 065, 068, 072 036, 045,
  • Toshiba 40G300U1 | Owners Manual - Page 28
    below), press on the remote control or TV control panel. Icon Picture Sound Preferences Locks Setup Item Mode Picture Settings Noise Reduction Game Mode Theater Settings Digital Audio Selector Audio Settings Advanced Audio Settings Audio Setup CC Selector Base CC Mode Digital CC Settings
  • Toshiba 40G300U1 | Owners Manual - Page 29
    the Signal Meter menu] System Status System Information  [Opens the System Information screen] Navigating the menu system You can use the buttons on the remote control or TV control panel to access and navigate your TV's onscreen menu system. • Press to open the menu system. Note: The menu
  • Toshiba 40G300U1 | Owners Manual - Page 30
    turn on or reset the TV, the Initial Setup window will appear. 1無 In the Menu Language field, press t or u to select your preferred language. 2無 Press t or u to select Time Zone and set your desired time zone with t or u and press . 3無 Next, the Location setting window will appear.For normal home
  • Toshiba 40G300U1 | Owners Manual - Page 31
    that were previously programmed into the TV's memory. •• To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. •• Programming channels when the ANT/ CABLE input is configured for Cable will take substantially longer than when
  • Toshiba 40G300U1 | Owners Manual - Page 32
    the remote control. Labeling channels A list of common channel labels (logos) for various channels (ABC, CBS, etc.) will be programmed into the TV. You will be will appear. 4無 Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software
  • Toshiba 40G300U1 | Owners Manual - Page 33
    be output. If not, the TV will automatically detect and output analog audio from the PC Audio input. Digital When viewing the HDMI 1 input, digital audio from the HDMI input will be output. Analog When viewing the HDMI 1 input, analog audio from the PC Audio input will be output. 4無 To save
  • Toshiba 40G300U1 | Owners Manual - Page 34
    to select Done and press .) A warning message will appear, select Yes and press , the TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the reset process. To cancel the reset: Select No and press in step 5 above
  • Toshiba 40G300U1 | Owners Manual - Page 35
    on the screen if no signal is received in video input mode. ••If CEC device is connected to a HDMI input, the REGZA-LINK icon will appear. If a REGZA-LINK device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input: Press on the remote or TV control panel repeatedly
  • Toshiba 40G300U1 | Owners Manual - Page 36
    , highlight Reset and press . Input labeling example: The screen below left shows the default Input Selection screen (with none of the inputs labeled as a specific device). The screen below right is an example of how you could label the inputs if you connected a VCR to VIDEO 1, Cable TV to VIDEO
  • Toshiba 40G300U1 | Owners Manual - Page 37
    either On, or Off. Note: History List will be cleared every time the TV is powered off. 4無 Press  to highlight ANT/CABLE List, and then press  or  the remote control. • Press  to surf backward through the previously tuned 32 channels in the History list, the channels in the ANT/ CABLE channel
  • Toshiba 40G300U1 | Owners Manual - Page 38
    channels will have priority when manually entering a channel number using the Channel Number (0-9) on the remote control, analog channels can still be tuned by / , if available Digital Only digital channels can be tuned Note: Digital mode will be most useful after analog channels are shut down
  • Toshiba 40G300U1 | Owners Manual - Page 39
    To tune to the next programmed channel: Press or on the remote control or TV control panel. Note: This feature will not work unless you program channels into the TV's channel memory ( page 31). Tuning to a specific channel (programmed or unprogrammed) Tuning analog channels: Press the Channel
  • Toshiba 40G300U1 | Owners Manual - Page 40
    sizes may not be available depending on the receiving signal format (those will be "grayed out" in the Picture Size screen). Using these functions to change the picture size (i.e., changing the height/ width ratio) for any purpose other than your private viewing may be prohibited under the Copyright
  • Toshiba 40G300U1 | Owners Manual - Page 41
    entire picture within the borders of the screen (i.e. no overscanning). • This is especially useful for external HD sources such as DVHS movies, or PC graphics. Note: ••This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and 720p), and ANT / CABLE (digital
  • Toshiba 40G300U1 | Owners Manual - Page 42
    to the factory defaults, highlight Reset and press . To turn off the auto aspect ratio feature: Select Off in step 3 above. Using the FREEZE feature To use the FREEZE feature: 1無 When viewing the TV, press to make the picture a still picture. 2無 To return to the moving picture, press again (or
  • Toshiba 40G300U1 | Owners Manual - Page 43
    in the Preference mode ( "Selecting the picture mode," above left) until Reset is selected. Using the closed caption mode Base closed captions The closed caption mode has two options: • Captions-An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are
  • Toshiba 40G300U1 | Owners Manual - Page 44
    Caption, and then press  or  to select the desired service. 4無 Press . Adjusting the audio Muting the sound Press on the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press , the mute mode will change in the following order: 1/2 Mute Mute Volume If the
  • Toshiba 40G300U1 | Owners Manual - Page 45
    SAP in step 3 above. Note: ••A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead
  • Toshiba 40G300U1 | Owners Manual - Page 46
    Control field, select Compressed. When Standard is selected, the audio is output with minimal compression. 4無 To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Note: ••This item will . • The Locks/Active screen appears if the PIN code
  • Toshiba 40G300U1 | Owners Manual - Page 47
    Limits screen, highlight Done and press . Note: ••The additional rating system can only be downloaded one time. You will not be able to download any updates to the rating system should such updates become available. ••The additional rating system is not designed, transmitted, or controlled by the TV
  • Toshiba 40G300U1 | Owners Manual - Page 48
    , press on the remote control. If it is rated "None," the word "NONE" appears in the RECALL screen (as shown below right). If rating information is not provided, no rating will appear in the RECALL screen. Locking channels With the Lock feature, you can lock specific channels. The locked
  • Toshiba 40G300U1 | Owners Manual - Page 49
    (by children, for example). When the control panel lock is On, none of the controls on the TV control panel will operate except POWER. To lock the control panel: 1無 Press and highlight the Locks menu icon. 2無 Press  to display the PIN code entering screen. 3無 Enter your four-digit PIN code
  • Toshiba 40G300U1 | Owners Manual - Page 50
    PC settings feature You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the
  • Toshiba 40G300U1 | Owners Manual - Page 51
    any required permission from copyright owners to use copyright content. Toshiba cannot and does not grant such permission. ••Depending on the file size and amount in your USB storage device, it may take some time for loading to view. A message will display on-screen when loading files from the
  • Toshiba 40G300U1 | Owners Manual - Page 52
    pictures are displayed using thumbnail data in each image file. 1無 Press to move the highlight in one window. If all of the photos will not fit in one screen, when pressing  at the top left thumbnail, the screen will allows you to change the photo content manually. When moving from Multi View to
  • Toshiba 40G300U1 | Owners Manual - Page 53
    the TV, you have to first complete the following: • Home network connection (page 20) • DLNA server installation (refer to the owner's manual of . Note: ••The viewer will also open even if there are no photo or music files. ••While the Media Player is active, the main menus cannot be displayed. To
  • Toshiba 40G300U1 | Owners Manual - Page 54
    TV's features Viewing movie files You can select movies from a list of available files. 1無 Press   to select a file or folder. / buttons can be used to page up/down the movie list when there are more files than will fit onto one screen , press • To locate a specific file, press or . repeatedly.
  • Toshiba 40G300U1 | Owners Manual - Page 55
    , press or playback. to start full screen Pause See page 54 Stop See page cable to connect your PC directly to the TV, you may not be able to use the automatic setup, and have to manually set up the network address. • If you used a hub or switch to connect the TV to your home network
  • Toshiba 40G300U1 | Owners Manual - Page 56
    uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote via HDMI connection ( page 17). When the Enable REGZA-LINK in the REGZALINK setup menu ( page 57) is set to On, the following REGZA-LINK functions will be enabled. REGZA-LINK® playback device
  • Toshiba 40G300U1 | Owners Manual - Page 57
    TV Auto Power Device Auto Standby Description If a connected HDMI device starts playing video or audio, the TV will automatically switch to the appropriate HDMI input. If a REGZA-LINK device is turned on, the TV turns on automatically. If the TV is turned off the TV will send a message to turn
  • Toshiba 40G300U1 | Owners Manual - Page 58
    SAP audio status (when HDMI input mode, Dolby Digital or PCM) • Video resolution • Aspect ratio of incoming video signal (4:3 or 16:9) • V-Chip rating status • Game Timer (if set) To close the RECALL screen: Press again. To display TV status information using INFO: Press on the remote control
  • Toshiba 40G300U1 | Owners Manual - Page 59
    the Color Temperature settings and will change based on which setting is selected in step 5 above. 7無 To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Note: If you select one of the factory-set picture modes (Sports, Standard, Movie
  • Toshiba 40G300U1 | Owners Manual - Page 60
    ), or HDMI inputs on the TV, smoother will correct this issue. Using CableClear® digital noise reduction The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable
  • Toshiba 40G300U1 | Owners Manual - Page 61
    open the Picture menu, highlight the Game Mode. 2無 Press  or  to select On. To turn off Game Mode: Select Off in step 2 above, change the video input, or turn the TV off and then on again. Note: You can change the video input by pressing on the remote control ( page 35). Using the advanced audio
  • Toshiba 40G300U1 | Owners Manual - Page 62
    procedure ( page 34). TV will not turn on •• Make sure the power cord is plugged in, and then press . •• The remote control batteries may be dead. Replace the batteries or try the control panel buttons. Picture problems General picture problems •• Check the antenna/cable connections ( Chapter
  • Toshiba 40G300U1 | Owners Manual - Page 63
    and turn on again. •• If several devices are connected, REGZA-LINK feature may not operate properly. •• Read the instruction manual furnished with the connected REGZA-LINK device. HDMI problems For HDMI cables •• Make sure to use cables with the HDMI Logo ( ) ( page 13). Network problems
  • Toshiba 40G300U1 | Owners Manual - Page 64
    Chapter 8: Troubleshooting Network Setup fails (Auto) •• The LAN cables are not connected properly or at all. Connect all cables. •• "The DHCP service is not enabled on the router, or no router is present. Refer to your router's documentation for instructions on enabling DHCP. If you do not have a
  • Toshiba 40G300U1 | Owners Manual - Page 65
    (346.84mm) Mass (Weight) 40G300U1/40G30U1: 36. lbs (16. kg) 46G300U1/46G30U1: 46. lbs (21. kg) Operating conditions Temperature: 32ºF - 95ºF (0ºC - 35ºC) Humidity: 20 - 80% (no moisture condensation) Supplied Accessories • Remote control with two size "AAA" batteries • Owner's manual (this book
  • Toshiba 40G300U1 | Owners Manual - Page 66
    HDMI terminals PC IN signal formats Note: Depending on the connected PC, the following status may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV .500MHz 85.500MHz 108.000MHz HDMI signal formats Format VGA SVGA
  • Toshiba 40G300U1 | Owners Manual - Page 67
    use. Your Responsibility Read the owner's manual thoroughly before operating this LCD Television. Complete and mail the enclosed product registration card or register your LCD Television online at www.tacp. toshiba.com/service. Registration of your LCD Television will enable TACP to contact you in
  • Toshiba 40G300U1 | Owners Manual - Page 68
    68 Your Responsibility Read the owner's manual thoroughly before operating this LCD Television. Complete and mail the enclosed product registration card or register your LCD Television online at http://support.toshiba.ca/warranty/. Registration of your LCD Television will enable TCL to contact you
  • Toshiba 40G300U1 | Owners Manual - Page 69
    ; i. Damage to the Television caused by failure to follow the specifications, User manuals or guides as to usage and/or storage. j. Firmware updates that are posted to the Toshiba Support website and can be performed by the end user via a USB stick or SD card type media. Disclaimer and Limitation
  • Toshiba 40G300U1 | Owners Manual - Page 70
    or sale of, the Television, on the other hand, the provisions of this limited warranty shall prevail. How to Obtain Warranty Services If, after following all of the operating instructions in this manual, checked the "Troubleshooting" section, and have visited www.toshiba.ca/support for additional
  • Toshiba 40G300U1 | Owners Manual - Page 71
    Note @(6@&/"JOEC
  • Toshiba 40G300U1 | Owners Manual - Page 72
    SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSHIBA OF CANADA LTD. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA - TEL: (905) 470-5400 SERVICE GameTimer, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. Channel Browser,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
For an overview of steps for setting up your new TV, see page10.
Note: To display a High Definition picture, the TV must be receiving
a High Definition signal (such as an over-the-air High Definition
TV broadcast, a High Definition digital cable program, or a High
Definition digital satellite program). For details, please contact
your TV antenna installer, cable provider, or satellite provider.
© 2010 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
HDA51D4600I
Owner’s Manual
Integrated High Definition
LCD Television
40G300U1
40G30U1
46G300U1
46G30U1
HIGH
-DEFINITION TELEVISION
C
M
Y
CM
MY
CY
CMY
K
40_46G300U1_EN-A5-Cover-03.pdf
1
2010/3/2
下午 02:01:06