Toshiba 46XV645U Owner's Manual - English - Page 21

Chapter 3: Using the remote control Using the remote control to control your other devices If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so) (- pages 23). To use your TV remote control to operate: •Cable converter box or satellite receiver, set the MODE SELECT switch to CABLE/SAT. •VCR, set the MODE SELECT switch to AUX1. •DVD player or HTIB, set the MODE SELECT switch to AUX2. Note: Even after the TV remote control is programmed, it may not operate certain features on any other devices. If this happens and you wish to use those features, you will need to use the device's original remote control. Point the remote control directly at the device. 16 17 18 19 1 POWER Turns the selected device on and off. 2 Channel Numbers (0-9) Press to directly access channels (as opposed to < ,). 3 +10 Press to directly access DVD chapters higher than 10. 4 TOP MENU Accesses a DVD's top menu. 5 CH Bb For channels programmed into the channel memory (- page 28): B selects the next higher channel. b selects the next lower channel. 6 GUIDE Displays the channel guide in the CABLE/ SAT mode. SET UP Accesses a DVD's setup menu in the AUX mode. 7 INFO Displays TV status information on-screen. 8 BbC c Press to navigate DVD menus (may not work on some DVD players). 9 ENTER Required by some satellite receivers and DVD players to activate certain functions. 10 DVD CLEAR Press to reset the title and chapter number. 11 PLAY Begins playback of a tape or DVD. 12 PAUSE Press during play or record mode to pause the picture; press again to restart. 13 STOP Stops the tape or DVD. 14 SKIP z Skips forward to locate later DVD chapters. 15 FF Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.) 16 SKIP Z Skips back to beginning of current DVD chapter, or locates previous chapters. 17 REW Rewinds/reverses the tape or DVD. (Press during play mode to view the picture moving rapidly backward.) 18 TV/VCR To view one program while recording another, press to select TV mode. SEARCH Selects a specific DVD chapter, title or time. 19 REC Starts tape recording. 20 MODE SELECT Switches Set to "TV" to control the TV; "CABLE/SAT" to control a cable converter box or satellite receiver; "AUX1" to control a VCR; "AUX2" to control a DVD player or HTIB. 21