Toshiba 46XV645U Owner's Manual - English - Page 23

Programming the remote control, to control your other devices - setup

Get Toshiba 46XV645U - 46inch LCD TV PDF manuals and user guides
UPC - 022265002520
View all Toshiba 46XV645U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Chapter 3: Using the remote control Programming the remote control to control your other devices Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 21. 1 In the remote control code table (- page 24-25), find the code for your device. If more than one code is listed, try each one separately until you find one that works. 2 Set the MODE SELECT switch to the type of device you are programming the remote control to operate - CABLE/SAT (for a cable converter box or satellite receiver), AUX1 (for a VCR or TV/VCR combo), or AUX2 (for a DVD player or HTIB [home theater in a box]). 3 While holding down E, press the Channel Number buttons to enter the 3-digit code for your device. 4 To test the code, turn on the device, point the remote control at it, and press p. See notes below. • If the correct code was entered, the device will turn off. •If the device does not respond, repeat steps 1-4 using another code. • If the device does not respond to another code, you will need to use the remote control that came with the device. 5 Remember to set the MODE SELECT switch back to "TV" to control the TV. 6 For future reference, write down the code(s) you used: DEVICE CODE DEVICE CODE • Some newer VCRs respond to either of two codes. These VCRs have a switch labeled "VCR1/VCR2." If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position ("VCR1" or "VCR2") and reprogram the remote control. Note: • In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device's original remote control. • Every time you change the batteries, you will need to reprogram the remote control. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
23
Chapter 3: Using the remote control
Programming the remote control
to control your other devices
Your Toshiba TV remote control is preprogrammed to
operate most Toshiba devices. To program your TV
remote control to operate a non-Toshiba device (or a
Toshiba device that it is not preprogrammed to
operate), follow the steps below. For details on using
the remote control to operate the device, see page 21.
1
In the remote control code table (
-
page 24–25),
find the code for your device. If more than one code
is listed, try each one separately until you find one
that works.
2
Set the
MODE
S
ELECT
switch to the type of device
you are programming the remote control to operate
— CABLE/SAT (for a cable converter box or
satellite receiver), AUX1 (for a VCR or TV/VCR
combo), or AUX2 (for a DVD player or HTIB [home
theater in a box]).
3
While holding down
E
, press the Channel
Number buttons to enter the 3-digit code for your
device.
4
To test the code, turn on the device, point the
remote control at it, and press
p
. See notes below.
•
If the correct code was entered, the device will turn
off.
•
If the device does not respond, repeat steps 1–4
using another code.
•
If the device does not respond to another code, you
will need to use the remote control that came with
the device.
5
Remember to set the
MODE
S
ELECT
switch back to
“TV” to control the TV.
6
For future reference, write down the code(s) you
used:
Note:
•
In addition to POWER, confirm that all necessary keys
on the TV remote control operate your device. If some
keys are not operational, repeat the device code setup
using another code (if other codes are listed for your
device). If, after trying all listed codes, the necessary
keys do not operate your device, use the device’s
original remote control.
•
Every time you change the batteries, you will need to
reprogram the remote control.
•
Some newer VCRs respond to either of two codes.
These VCRs have a switch labeled “VCR1/VCR2.” If
your VCR has this kind of switch and does not respond
to the codes for your VCR brand, set the switch to the
other position (“VCR1” or “VCR2”) and reprogram the
remote control.
DEVICE
CODE
DEVICE
CODE