Toshiba 46XV645U Owner's Manual - English - Page 35
Setting the Channel Tuning Mode
UPC - 022265002520
View all Toshiba 46XV645U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 6: Using the TV's features Setting the Channel Tuning Mode This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode. Note: To use this feature, the ANT/CABLE In must be set to Antenna (- page 28). The channel tuning mode has three options. Mode Description Standard Both analog and digital channels can be tuned normally Auto (default) Digital Digital channels will have priority when manually entering a channel number using the Channel Number (09) on the remote control, analog channels can still be tuned by < / , if available Only digital channels can be tuned To set the Channel Tuning Mode: 1 From the SETUP menu, highlight TV Settings and press T. 2 Press B or b to highlight Channel Tuning Mode. 3 Press C or c to select your desired mode and then press O. Note: The Channel Options window as well as the Channel Browser ANT/CABLE List will be updated automatically when you change the mode. Also, the History List will be cleared, but the Favorites List will be saved. Tuning to the next programmed channel To tune to the next programmed channel: Press < or , on the remote control or TV control panel. Note:This feature will not work unless you program channels into the TV's channel memory (- page 28). Tuning to a specific channel (programmed or unprogrammed) Tuning analog channels: Press the Channel Number (0-9) on the remote control. For example, to select channel 125, press 1, 2, 5, then T. Tuning digital channels: Enter the major Channel Number (0-9) on the remote control, followed by the dash (=) button and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, -, 1, then T. Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the dash (=) button if needed). 3 Press R on the remote control. The previous channel will display. Each time you press R, the TV will switch back and forth between the last two channels that were tuned. Note: If you press R from a non-antenna input, the TV will return to the last-viewed input. Switching between two channels using SurfLock™ The SurfLock™ feature temporarily "memorizes" one channel to the R button, so you can return to that channel quickly from any other channel by pressing R. To memorize a channel to the R button: 1 Tune the TV to the channel you want to program into the R button. 2 Press and hold R for about 2 seconds until the message "Memorized" appears on-screen. The channel has been programmed to the R button. 3 You can then change channels repeatedly, and when you press R, the memorized channel will be tuned. The TV will return to the memorized channel one time only. Once you press R and then change channels again, the CH RTN memory will be cleared and the button will function as Channel Return, by switching back and forth between the last two channels that are tuned.This feature also works for external inputs. 35