Toshiba 47L6200U User Guide - Page 126
Adjusting the range, Selecting the optical audio output format
View all Toshiba 47L6200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
126 Picture and Sound Controls Adjusting the audio Adjusting the range You can adjust bass and treble. 1 Press the MENU button. Select SETTINGS, SOUND, and then Bass or Treble. 2 Press the ( / arrow) buttons to adjust the range, and then press the EXIT button. Selecting the optical audio output format You can select the optical audio output format when you connect a Dolby® Digital decoder or other digital audio systems to the TV's DIGITAL AUDIO OUT terminal. 1 Tune to a digital source on the ANT/CABLE input. 2 Press the MENU button. Select SETTINGS, PREFERENCES, AV Connection, and then press the OK button. 3 Press the ( / arrow) buttons to select Digital Audio Output. 4 Press the ( / arrow) buttons to select Auto or PCM. Press the EXIT button. Using the Dolby® Digital Dynamic Range Control feature You can further compress Dolby® Digital and Dolby® Digital Plus dynamic range so you can switch from digital to analog broadcasts at the same dynamic range. 1 Press the MENU button. Select SETTINGS, SOUND, and then Dynamic Range Control. 2 Press the ( / arrow) buttons to select On. NOTE This feature is available when Dolby® Digital or Dolby® Digital Plus is input to the TV in the following situations: ❖ When tuned to a digital RF channel ❖ When an HDMI® input is used This feature is automatically set to Off when Dynamic Volume (Audyssey Dynamic Volume®) is set to Low or High. This feature will also affect Digital Audio Output when the optical audio output format is set to PCM.