Toshiba 47L6200U User Guide - Page 66
Storing channels in memory (optional), SETTINGS, SETUP, ANT/CABLE In, Antenna, Cable, Start Scan
View all Toshiba 47L6200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
66 Setting up your TV How to navigate the menu 3 Press the ( / arrow) buttons to select Home. 4 Press the OK button. ANT/CABLE In This setting configures the antenna input source for the ANT/CABLE terminal. 1 Press the MENU button. 2 Select SETTINGS, SETUP, and then ANT/CABLE In. 3 Select Antenna or Cable and press Next. 4 Select Cable and press Next. NOTE If you do not want to scan channels, you do not need to make a selection for ANT/CABLE. Select Next and press OK to skip this step. 5 Select Start Scan. After scanning is complete, the auto tuning results screen will appear. 6 Press OK or EXIT. Storing channels in memory (optional) To make sure your TV stops only on the channels you want when you press the CH Up/Down arrow buttons on the remote control or the control panel, store those channels in the TV's memory. Auto Tuning NOTE You must set up the antenna/cable input source first. See "Initial setup" on page 51. You can set up the TV to detect all active channels in your area and store them in its memory. Then you can manually store or skip individual channels from memory. Option: Cable Description: Note: If you select Cable, auto tuning deletes previously stored channels from memory. This setup requires some time, but you do not need to repeat the setup unless your cable TV service's lineup changes significantly.