Toshiba 50L4300U User's Guide for Model Series L4300U and L7300U TV - Page 108

108 Picture and Sound Controls Adjusting the audio Depending on the equipment, noise etc. may occur when the signal is changed. ❖❖ Depending on the connected equipment (amplifier, etc.), adjustment may not be possible. ❖❖ When the optical audio output setting (AutotPCM) is changed, it may be necessary to adjust the timing again. ❖❖ Do not use other than for audio output from the AV amplifier, etc. (Malfunction may occur) Using the Dolby® Digital Dynamic Range Control feature You can further compress Dolby® Digital and Dolby® Digital Plus dynamic range so you can switch from digital to analog broadcasts at the same dynamic range. 1 Press the SETUP button. 2 Select Sound > Dynamic Range Control and press the OK button. 3 Press the p/q (arrow) buttons to select On. NOTE This feature is available when Dolby® Digital or Dolby® Digital Plus is input to the TV in the following situations: ❖❖ When tuned to a digital RF channel ❖❖ When an HDMI™ input is used This feature is automatically set to Off when Dynamic Volume (Audyssey Dynamic Volume®) is set to Day or Night. This feature will also affect Digital Audio Output when the optical audio output format is set to PCM. Audyssey Premium Television™ These televisions use a suite of technologies for better sound including: ❖❖ Audyssey EQ®-provides clear, accurate and natural sound right out of the box. This technology ensures you enjoy your audio experience as much as your video. ❖❖ Audyssey ABX™-technology uses sophisticated driver analysis and low frequency monitoring to extend the range and bass of small speakers. This enables the system to produce lower frequencies than would be possible with a traditional system of the same size. ❖❖ Audyssey Dynamic Volume®-automatically adjusts volume to