Toshiba 50L4300U User's Guide for Model Series L4300U and L7300U TV - Page 88
Setting No Signal Power Down
View all Toshiba 50L4300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
88 Basic features Setting No Signal Power Down NOTE If a power failure occurs, the sleep timer setting may be cleared. To display the time remaining until the TV turns off, press the SLEEP button. To cancel the sleep timer, press the SLEEP button repeatedly or press the p/q (arrow) buttons until it is set to 0 minutes. NOTE When the following features are set, the feature that is set for the nearest time will function. ❖❖ Sleep Timer ❖❖ Auto shutdown after 1 hour of inactivity (after powering on by On Timer) ❖❖ No signal auto power off (after approximately 15 minutes of no signal) Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itself off after about 15 minutes if no signal is detected. You can change each input's setting to Off: ANT/CABLE, Video 1, Video 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, or PC. 1 Press the SETUP button. 2 Select Options > Power Management > No Signal Power Down, and then press the OK button. 3 Press the p/q (arrow) buttons to select the item you want to change and press the OK button. 4 Press the p/q (arrow) buttons to select On or Off. 5 Press the EXIT button. NOTE v Default setting for each input is On. ❖❖ A warning message will appear 1 minute before turning off.