Toshiba 52HM84 Owner's Manual - English - Page 9

Introduction Connecting your TV Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel. You will need: • two coaxial cables • one set of standard A/V cables From Cable Box or Antenna Stereo VCR IN from ANT OUT to TV CH 3 CH 4 TV VIDEO IN OUT L R AUDIO Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an Svideo cable (in the S-video jacks) instead of the standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Using the Remote Control Setting up your TV Using the TV's Features Appendix Connecting a cable converter box This connection allows you to watch basic and premium cable channels. To watch basic cable and use the TV's features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. You will need: • three coaxial cables From Cable TV Note: When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels. OUT IN Cable converter box #01E08-16_46,52,62HM84 9 Black (E) 46HM84, 52HM84, 62HM84 9 5/31/04, 12:20 PM Index