Toshiba 55SL412U User Manual - Page 6

7) VESA Mounting Pattern TV Size Hole Pattern(HxV) 40" 200x200 mm 46'' 400x400 mm 55'' 400x400 mm Screw Size M6 M8 M8 (unit in mm) Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2) Remove the four screws shown in the below diagram. This will allow removal of the pedestal stand. 3) Once you have removed all four screws holding the pedestal stand in place, remove the pedestal stand from the TV. 40" TV VESA Mounting Pattern 46" TV VESA Mounting Pattern Four screws Four screws Hook Sturdy strap (as short as possible) 55" TV VESA Mounting Pattern Four screws Four screws Hook Sturdy strap (as short as possible) Four screws Four screws Hook Sturdy strap (as short as possible) CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor. 6