Toshiba 56HM66 Owner's Manual - English
Toshiba 56HM66 - 56" Rear Projection TV Manual
UPC - 022265251454
View all Toshiba 56HM66 manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba 56HM66 manual content summary:
- Toshiba 56HM66 | Owner's Manual - English - Page 1
minutes for the picture to appear on-screen. This is a property of DLPTM TV lamp technology and is NOT a sign of malfunction. For details, see "IMPORTANT NOTICE ABOUT HOT LAMP RESTART" on page 2. © 2006 TOSHIBA CORPORATION All Rights Reserved RICA CONSUMER PR O 14001 FILE No. A96 Owner's Record The - Toshiba 56HM66 | Owner's Manual - English - Page 2
blinking. Important notes about your DLP™ projection TV 1) The light source for this TV is a projection lamp unit with a limited service life. When the lamp wears out, the picture may become dark or black or the lamp may fail, at which time you must replace the lamp unit. See "Lamp unit replacement - Toshiba 56HM66 | Owner's Manual - English - Page 3
and movies by rating (V-Chip 36 Blocking channels 37 Unlocking programs temporarily 38 Using the input lock feature 38 Using the control panel lock feature 39 Setting the sleep timer 39 Displaying TV setting information on-screen using RECALL 40 Understanding the auto power off feature 40 - Toshiba 56HM66 | Owner's Manual - English - Page 4
channel memory (- page 17). 13 For details on using the TV's features, see Chapters 5 and 6. 14 For help, refer to the Troubleshooting Guide (- Chapter 7). 15 For lamp unit replacement instructions, see Chapter 8. 16 For technical specifications and warranty information, see Chapter 8. 17 Enjoy your - Toshiba 56HM66 | Owner's Manual - English - Page 5
area of the TV screen. See "Remote control effective range" (- page 7). 2 Blue, Yellow and Green/Red LEDs See "LED indications" (- page 46) for additional information. 3 POWER - Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV control panel and - Toshiba 56HM66 | Owner's Manual - English - Page 6
dubbing. 5 IR OUT - For controlling infrared remote-controlled devices through the TV. You can connect up to two devices with an IR blaster cable, and then control the devices using the TV's IR pass-through features. 6 6 ANT 1 and ANT 2 - Two inputs that support analog (NTSC) and digital (ATSC) off - Toshiba 56HM66 | Owner's Manual - English - Page 7
Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices (- page 11). If you have a non-Toshiba device or a Toshiba device that the remote reduced, replace batteries with new ones. • When necessary to replace batteries in the remote control, always replace both - Toshiba 56HM66 | Owner's Manual - English - Page 8
the Channel Browser™ feature (- page 26). 10 RECALL displays TV setting information on-screen (- page 40). 11 CH RTN returns to the last viewed channel (- page 26). 12 MUTE reduces or turns off the sound (- page 32). 13 3 C / # c While watching TV, these buttons open the Channel Browser™ banner and - Toshiba 56HM66 | Owner's Manual - English - Page 9
memory only). 5 GUIDE Displays channel guide. 6 INFO Displays TV status information on-screen. 7 BbC c Press to navigate DVD menus (may not work on some DVD players). 8 ENTER Required by some satellite receivers and DVD players. 9 DVD CLEAR Press to reset the title and chapter number. 10 PLAY Begins - Toshiba 56HM66 | Owner's Manual - English - Page 10
in the "TV" device mode. REMOTE CONTROL KEY POWER SLEEP INPUT 1-9 0 100/-/+10 RECALL CH RTN INFO MENU Bb/FAVBb C 3 c # ENTER EXIT/DVD CLEAR VOL + - CHBb PIC SIZE MUTE GUIDE FF PAUSE/STEP PLAY REW HOME STOP FREEZE SKIP Z SKIP z TV/VCR REC SET UP TOP MENU Toshiba TV (TV) Power Sleep timer TV/Video - Toshiba 56HM66 | Owner's Manual - English - Page 11
the device. 5 Remember to set the MODE SELECT Switch back to TV to control the TV. 6 For future reference, write down the code(s) you used: DEVICE CODE DEVICE CODE Notes: • In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not - Toshiba 56HM66 | Owner's Manual - English - Page 12
TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, use the device's remote Pansat Primestar Proscan Radio Shack RCA Realistic Samsung Sony Star Choice Star Trak STS Toshiba Uniden Zenith 020, 040, 044, 046, 050, 053 018, 041, 051 - Toshiba 56HM66 | Owner's Manual - English - Page 13
Using the remote control Curtis Symphonic Tandy Tashiko Tatung Teac Technics Teknika Toshiba Totevision Unitec Unitech Vector Research Video Concepts 006, 011, 012, 053 005, 006, 011, 012, 039, 053 Wards White Westinghouse XR-1000 Yamaha Zenith HTIB Lasonic Panasonic Venturer 009, 010, 011, 016, - Toshiba 56HM66 | Owner's Manual - English - Page 14
remote control or TV control panel. Icon Applications Video Item Channel Browser Digital CC/Audio Selector CableCARD™ Picture Settings Advanced Picture Block Input Lock Front Panel Lock New PIN Code Installation Sleep Timer ColorStream HD1 Audio HDMI 1 Audio ColorStream HD2 Audio HDMI 2 Audio - Toshiba 56HM66 | Owner's Manual - English - Page 15
System Information S [Opens the System Information window] Navigating the menu system You can use the buttons on the remote control or TV control panel to access and navigate your TV's on-screen menu system. • Press Y to open the menu system. • When a menu is open, use the up/down/left/right - Toshiba 56HM66 | Owner's Manual - English - Page 16
Sleep Timer ColorStream HD1 Audio HDMI 1 Audio ColorStream HD2 Audio HDMI 2 Audio Quick Restart No input source (Cable or Antenna) for the ANT 1 input on the TV. 5 Press b to highlight Antenna 2 in and then C or c to select the input source (Cable or Antenna) for the ANT 2 input on the TV - Toshiba 56HM66 | Owner's Manual - English - Page 17
. To remove a channel from the memory, you must manually delete it. • To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. • Programming channels for an antenna input configured for Cable will take substantially longer than - Toshiba 56HM66 | Owner's Manual - English - Page 18
to add, and then press T to check the box. To manually add digital subchannels on a physical channel: Use the Channel Numbers and the Dash (=) on the remote control to enter the channel number (for example, 56-1). If the channel is found, the number will be added to the list and the box will be - Toshiba 56HM66 | Owner's Manual - English - Page 19
first. OK 9 10 11 Reset Cancel Done Note: If you try to add more than nine favorite channels per input, an error message will appear. 2, which will change the favorite channel settings in the selected input. (This will not change the TV's current input.) • Or... Press + to select ANT 1, or ANT - Toshiba 56HM66 | Owner's Manual - English - Page 20
your TV directly to the Audio/Video output of your Set-Top-Box will assure a more vivid picture and enhance your viewing enjoyment. After the CableCARD™ is inserted, a CableCARD™ option appears in the Applications menu, with informational screens provided by your digital CableCARD™ service (see - Toshiba 56HM66 | Owner's Manual - English - Page 21
, the useful service life of the lamp may be shorter than the average useful service life (- page 47). IMPORTANT NOTICE ABOUT "HOT LAMP RESTART" When the TV has been powered on long enough for the lamp unit to get hot, it may take several minutes for the picture to appear on-screen in the following - Toshiba 56HM66 | Owner's Manual - English - Page 22
of Installation menu icons will appear on-screen, as shown below right. To cancel the reset: Highlight No and press T. Note: If you have previously set the TV to High Bright mode, and have restored Factory Defaults, the TV will default to Low Power mode. To set the TV back to High Bright mode, see - Toshiba 56HM66 | Owner's Manual - English - Page 23
HDMI 1 6 HDMI 2 7 ANT 2 ANT 1 0 - 7 / INPUT to Select Notes: • When the Input Selection screen is open, you also can use Bb on the remote control (or the CHANNEL U u buttons on the control panel) to change the input. • You can repeatedly press + on the remote control or the INPUT button on the TV - Toshiba 56HM66 | Owner's Manual - English - Page 24
Input Selection screen (with none of the inputs labeled). The screen below right is an example of how you could label the inputs if you had connected a DVD player to VIDEO 1, Cable TV to VIDEO 2, a video recorder to ColorStream HD1, a DTV set-top box to HDMI List Inputs List Reset Select Mode Power - Toshiba 56HM66 | Owner's Manual - English - Page 25
in the channel history 4 Home instructions (this will be replaced once there are at least 6 items in the History, ANT 1 or Inputs lists) 5 Current list (History, ANT 1, ANT 2 or Inputs) 6 Current input 7 Current antenna type (cable or TV) 8 Active channel number 9 Channel call letters (if - Toshiba 56HM66 | Owner's Manual - English - Page 26
a channel or input as Home: 1 Tune the TV to the channel or input you would like to set as the Home source. 2 Press and hold i on the remote control for 3 seconds. When HOME is saved, the Channel Browser™ banner will appear at the bottom of the screen and the HOME icon will flash green. To tune - Toshiba 56HM66 | Owner's Manual - English - Page 27
can be saved for each input on your TV. To select the picture size: 1 Press I on the remote control. 2 While the Picture Size screen is on-screen, press the corresponding number button (0-4) to select the desired picture size. Picture Size 0 Natural 1 TheaterWide 1 2 TheaterWide 2 3 TheaterWide - Toshiba 56HM66 | Owner's Manual - English - Page 28
.book Page 28 Thursday, February 23, 2006 2:49 PM Chapter 5: Using the TV's basic features TheaterWide 3 picture size (for letter box programs with subtitles) • The picture is stretched wider to fill the width of the screen, but only slightly stretched taller. • The top and bottom edges are hidden - Toshiba 56HM66 | Owner's Manual - English - Page 29
picture size is automatically selected when one of the following input sources is received: • A 480i signal from the VIDEO 1, VIDEO 2, ColorStream HD-1, or ColorStream HD-2 input. • A 1080i, 480i, 480p, or 720p signal from the HDMI input component video), or HDMI inputs on the TV, smoother motion can - Toshiba 56HM66 | Owner's Manual - English - Page 30
to High Bright mode, and have chosen Reset in item 4 above, the TV will default to Low Power mode. To set the TV back to High Bright mode, see page 42. Adjusting the picture quality You can adjust the picture quality (contrast, brightness, color, tint, and sharpness) to your personal preferences - Toshiba 56HM66 | Owner's Manual - English - Page 31
Color Auto, Small, Standard, Large Auto, Default, Mono w. Serif, Prof. w. Serif, Mono w/o Serif, Prop w/o Serif, Casual, Cursive, Small Capitals Auto, None, Raised, Depressed, Uniform, Left Drop Shadow, Right Drop shadow Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan Auto, Black, White - Toshiba 56HM66 | Owner's Manual - English - Page 32
TV's basic features Digital closed captions You can use the Digital CC/Audio Selector to select digital closed caption services service. 4 Press O. Closed Caption Audio CC 1 None Adjusting the audio Muting the sound Press W to partially reduce (1/2 MUTE) or turn off (MUTE) the sound switch - Toshiba 56HM66 | Owner's Manual - English - Page 33
TV is in VIDEO mode. When the TV receives a stereo or SAP broadcast, the word "STEREO" or "SAP" appears on-screen when E is pressed. To listen to stereo sound , or Balance). Audio Settings Bass Treble Balance StableSound 100 100 0 Off Reset Done 4 Press C or c to adjust the level. • C makes - Toshiba 56HM66 | Owner's Manual - English - Page 34
happens when a TV program switches to a Guide). To turn off the built-in speakers: 1 Press Y and open the Audio menu. 2 Highlight Audio Setup and press T. 3 In the Speakers field, select Off. Audio Setup MTS Language Speakers Optical Output Format Stereo English Off Dolby Digital Reset - Toshiba 56HM66 | Owner's Manual - English - Page 35
Rating Limits Channels Block Input Lock Front Panel Lock New PIN Code Off Off Off Navigate ENTER Select CH RTN Back EXIT Exit 2 Press b, which displays the PIN code entry screen. • The Lock System screen (below) appears if a PIN code has not been stored. Press the Channel Number buttons to enter - Toshiba 56HM66 | Owner's Manual - English - Page 36
blocking is a function of the V-Chip feature in this TV, which supports the U.S. V-Chip system only. To block and unblock TV programs and movies: 1 Press Y and highlight the Locks menu icon. 2 Press b to display the PIN code entering screen. 3 Enter your four-digit PIN code and press T. 4 Press b to - Toshiba 56HM66 | Owner's Manual - English - Page 37
remote control. If it is rated "None," the word "NONE"appears in the RECALL screen (as shown below right). If rating information is not provided, no rating will appear in the RECALL screen. TV Edit Rating Limits Channels Block Input Lock Front Panel Lock New PIN Code Off Off Off Navigate ENTER - Toshiba 56HM66 | Owner's Manual - English - Page 38
HD-1, ColorStream HD-2, HDMI 1, and HDMI 2) and channels 3 and 4. You will not be able to view the input sources or channels until you unlock the inputs. To lock/unlock the video inputs: 1 Press Y and highlight the Locks menu icon. 2 Press b to display the PIN code entering screen. 3 Enter your four - Toshiba 56HM66 | Owner's Manual - English - Page 39
panel lock is On, none of the controls on the TV control panel will operate except POWER. To lock the control panel: 1 Press Y and highlight the Locks menu icon. 2 Press b to display the PIN code entering screen. 3 Enter your four-digit PIN code and press T. 4 Press b to highlight Front Panel Lock - Toshiba 56HM66 | Owner's Manual - English - Page 40
the auto power off feature To display TV setting information on-screen: Press E on the remote control. The following information will display on-screen (if applicable): STEREO NC-17 Sleep Timer: 18 min. Lamp High Bright Natural 480i ANT 1 CABLE 81-1 Sample RECALL screen • Current input (ANT - Toshiba 56HM66 | Owner's Manual - English - Page 41
feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Game Mode Reset On Auto Low Cool Low Power Off Done ANT 1 Notes: • If the current input - Toshiba 56HM66 | Owner's Manual - English - Page 42
CH RTN Back EXIT Exit 3 In the Lamp Mode field, select High Bright or Low Power, whichever you prefer. Advanced Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Game Mode On Auto Low Cool Low Power Off ANT 1 Reset Done 4 To save the new settings - Toshiba 56HM66 | Owner's Manual - English - Page 43
to select On. Advanced Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Game Mode Reset Video 1 On Auto Low Cool Low Power On Done To turn off Game Mode: Select Off in step 3 above or change the video input. You can change the video input in any of the - Toshiba 56HM66 | Owner's Manual - English - Page 44
the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel for 5 or more seconds to reset the TV. Other problems • If your TV's problem is not addressed in this Troubleshooting section or the recommended solution has not worked, use - Toshiba 56HM66 | Owner's Manual - English - Page 45
to help synchronize the sound to the picture. - If you notice this phenomenon only on certain TV channels, please contact your local broadcast, cable, or satellite provider to inform them of this issue. Sound problems • Check the antenna/cable connections (- Installation Guide). • The station may - Toshiba 56HM66 | Owner's Manual - English - Page 46
. Yellow blinks. Red blinks. Condition The TV is operating properly. In LPS mode (standby with Quick Restart ON). The lamp is not working properly. The lamp is not working properly after the eighth automatic restart (see item #3). The lamp unit door is not seated properly. Fan stopped (light engine - Toshiba 56HM66 | Owner's Manual - English - Page 47
• if the screen (lamp) does not light (LED indication #4, - page 46); or • if you hear a loud noise and the picture goes black, which may indicate a lamp rupture (LED indication #4, - page 46). To obtain a replacement lamp unit: In the U.S. In warranty: Visit www.tacp.toshiba.com/service or call - Toshiba 56HM66 | Owner's Manual - English - Page 48
damage may result from directly viewing the light produced by this lamp. Always turn off the TV and unplug the power cord before opening the lamp unit door. 2 STOP! Allow the lamp to cool for at least one (1) hour before replacing it. 4 Using a manual Phillips screwdriver, loosen the two screws on - Toshiba 56HM66 | Owner's Manual - English - Page 49
the hooks inside the TV cabinet opening. Lamp unit door 9 Replace the screw and tighten using a manual screwdriver. Hand tighten using manual screwdriver Lamp unit door NOTE: Make sure the lamp unit door is installed securely; otherwise, the TV may not turn on. 10 Plug in the power cord and turn on - Toshiba 56HM66 | Owner's Manual - English - Page 50
: 41ºF-95ºF (5ºC-35ºC) Humidity: 20-80% (no moisture condition) Supplied Accessories • Remote control with two size "AAA" batteries • Dual-wand IR blaster cable • Installation Guide • Operating Guide (this book) Optional Stands 50HM66:ST 5066 56HM66:ST 5666 * Encrypted channels can be viewed on this - Toshiba 56HM66 | Owner's Manual - English - Page 51
following all of the operating instructions in this manual and reviewing the section titled "Troubleshooting," you find that service is needed: (1) To find the nearest TACP Authorized Service Station, visit TACP's website at www.tacp.toshiba.com/service or contact TACP's Consumer Solution Center - Toshiba 56HM66 | Owner's Manual - English - Page 52
'S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU. ON-SITE SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT. Owner's Manual and Product Registration Read this owner's manual thoroughly before operating this DLP™ television - Toshiba 56HM66 | Owner's Manual - English - Page 53
source code. A copy of the LGPL source code in this product may be obtained by contacting Toshiba PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, software developed by the OpenSSL Project for use in the OpenSSL attribution as the author of the parts of the library used. This can - Toshiba 56HM66 | Owner's Manual - English - Page 54
30 Picture quality 30 Picture scroll 28 Picture size selection 27 POWER button 5 Q Quick Restart 20 R RECALL button 40 Remote control Battery installation 7 Device code table 12 Effective range 7 Functional key chart 10 Learning about the buttons......... 8 Programming 11 S SAP sound 33 - Toshiba 56HM66 | Owner's Manual - English - Page 55
HM66_EN.book Page 55 Thursday, February 23, 2006 2:49 PM Notes 55 HM66 (E/F) Web 213:276 - Toshiba 56HM66 | Owner's Manual - English - Page 56
, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. Channel Browser, SurfLock, and Quick Restart are trademarks of Toshiba America Consumer Products, L.L.C. Digital Light Processing™, DLP™ and the DLP™ medallion are trademarks of Texas Instruments
HIGH
-DEFINITION TELEVISION
50HM66
56HM66
I
S
O
1
4
0
0
1
F
I
L
E
N
o
.
A
9
6
4
5
T
O
S
H
I
B
A
A
M
E
R
I
C
A
C
O
N
S
U
M
E
R
P
R
O
D
U
C
T
S
,
L
.
L
.
C
.
YC/N
VX1A00001000
Integrated High Definition
DLP
™
Projection Television
© 2006 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back of
your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
For an overview of steps for setting up your new TV, see page 4.
Note: If the TV is powered off and then quickly on again when the
lamp unit is hot, it may take several minutes for the picture to appear
on-screen. This is a property of DLP
TM
TV lamp technology and is NOT
a sign of malfunction. For details, see "IMPORTANT NOTICE ABOUT
HOT LAMP RESTART" on page 2.
Note: To display a High Definition picture, the TV must be receiving a
High Definition signal (such as an over-the-air High Definition TV
broadcast, a High Definition digital cable program, or a High Definition
digital satellite program). For details, please contact your TV antenna
installer, cable provider, or satellite provider.
IMPORTANT NOTE
Before connecting, operating, or adjusting this product, carefully
read the Important Safety, Installation, Care, and Service
information in the
Installation Guide
.
HM66_EN.book
Page 1
Thursday, February 23, 2006
2:49 PM