Toshiba 65HM167 Service Manual - Page 25

Enter Customer, Ensure the input, selection is, properly set in, the menu., Picture, Restored?, - no picture

Page 25 highlights

Insure the Following Steps are Taken 3 Note: If a DVI device is being used via an adaptor, with the HM67/167 series sets, the input MUST be on HDMI 1 and the Audio cables MUST be connected to the PC/HDMI 1 inputs. Select HDMI 1, 2, or 3 (depending on which input the HDMI cable is connected to. Make sure the HDMI device is running and in good working order. Enter Customer Menu Ensure the input selection is properly set in the menu. No Digital (Seine) Bd Is Picture Restored? Yes Resolved 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

Insure the Following Steps are Taken
Enter Customer
Menu
3
Ensure the input
selection is
properly set in
the menu.
Select
HDMI 1, 2, or 3 (depending
on which input the HDMI
cable is connected to.
Is
Picture
Restored?
Make sure the HDMI device
is running and in good
working order.
No
Digital (Seine) Bd
Resolved
Yes
Note: If a DVI device is
being used via an adaptor,
with the HM67/167 series
sets, the input MUST be on
HDMI 1 and the Audio
cables MUST be connected
to the PC/HDMI 1 inputs.
24