Toshiba D-R410 Owner's Manual - English - Page 93

Introduction Connections Basic Setup Disc Management TROUBLESHOOTING Symptom Remedy Playback The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play back certain discs (such as a CD-ROM) (page 10). • The region code on the DVD-video does not match the unit (page 10). • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates (page 4). • If the disc was recorded on another recorder, the unit cannot play back the disc if it was not finalized. Playback image freezes for a second. • During the playback of 2 layered disc, picture may freeze for a moment when the 1st layer switches to the 2nd layer. This is not a malfunction. The disc does not start playback from the beginning. • Resume playback was activated (page 52). Press [STOP C] twice. • You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first inserted. The unit starts playing back the disc automatically. • The DVD-video features an auto playback function. Some functions such as stop, search, or slow-motion playback cannot be performed. • Depending on the disc, you may not be able to do some of the operations. Refer to the instruction manual supplied with the disc. The language for the sound track • Tracks multilingual are not recorded being played back. cannot be changed. • The DVD-video prohibits the changing of the language for the sound track. The subtitle language cannot be • Multilingual subtitle are not recorded on the DVD-video. changed or turned off. The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back. • The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. • The DVD-video prohibits changing angles. • Try changing the angle using the DVD-video's menu. Recording / Timer recording / Editing External input position (L1/L2) • This unit is designed so. This is not a malfunction. cannot be changed while recording. Nothing was recorded even though you set the timer setting correctly. • There was a power failure during recording. • The unit's internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (page 23). • The program contains copy protection signals that restricts copying. • The timer setting overlapped with another setting that has priority. Recording does not stop immediately after you press [STOP C]. • It will take a few seconds for the unit to input disc data before recording stops. Timer recording is not complete or did not start from the beginning. • The timer setting overlapped with another setting that has priority (page 39). • Disc space was not enough. • "Make Recording Compatible" is not set to "ON", when recording onto DVD+RW/+R that was recorded on other unit. Recording Playback Editing Function Setup Others E7K7AUD_D-R410KU_EN.indd 93 EN 93 2007/12/14 15:04:11