Toshiba D-VR600 Owner's Manual - English - Page 44

Tape playback Loading and unloading a cassette tape Use only video cassette tapes marked and . • Cassettes marked "VHS" (or "S-VHS") can be used with this video cassette recorder. However, S-VHS recording is not possible with this unit. • This unit is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to playback S-VHS recordings with regular VHS resolution. • HQ VHS is compatible with existing VHS equipment. Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. PS P Erase prevention tab Automatic power ON When you insert a cassette tape, the VCR power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. Unloading You can eject the video tape while the unit is turned off. 1 Press EJECT on the unit or the remote control. 2 Remove the cassette tape. Automatic tape eject This unit will automatically rewind the tape when the tape has ended and when the tape has rewound to its beginning, the cassette tape will be ejected automatically. To prevent accidental erasure Remove the erase prevention tab with a screwdriver. Screwdriver To record again Cover the hole with a piece of adhesive tape. Erase prevention tab Tape speed and maximum recording time Tape Speed SP (Standard Play) SLP (Super Long Play) 44 T-160 2-2/3 hours 8 hours T-120 2 hours 6 hours Adhesive Tape Video cassette tape T-90 1-1/2 hours 4-1/2 hours T-60 1 hour 3 hours 2K70101A_E P44-51 44 08`02`07, 20:44 T-30 30 minutes 1-1/2 hours