Toshiba D-VR600 Owner's Manual - English - Page 46

Tape playback Special playback Picture search Reverse picture search function Press REW x 1 or x 2 during the playback. Forward picture search function Press F.FWD x 1 or x 2 during the playback. To resume normal playback: Press PLAY. SPEED SEARCH TIMES TAPE SPEED SP (Standard Play) LP (Long Play) SLP (Super Long Play) PICTURE SEARCH SPEED PRESS ONCE PRESS TWICE 3 X 5 X 7 X 9 X 9 X 15 X Still picture Press PAUSE/STILL during playback. To resume normal playback: Press PLAY or PAUSE/ STILL. Slow motion During playback, press SLOW. To resume normal playback: Press PLAY or SLOW. Slow tracking and vertical lock adjustment If noise bars appear in the picture during slow motion, press the TRK +/- to reduce the noise bars. If the still picture jitters excessively, press TRK +/- to stabilize the still picture. Frame by frame picture Press PAUSE/STILL during playback. Each time you press SLOW, the picture advances frame by frame. To resume normal playback: Press PLAY or PAUSE/ STILL. Adjusting tracking condition Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback, press TRK +/- to eliminate the noises. "MANUAL TR." will appear. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. • Press ATR to reactivate automatic tracking again. "AUTO TR." will appear. NOTES: • The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and SLOW MOTION. • During picture search mode, there will be noise bars which are caused by the system. • The Special Playback will automatically change to normal playback after approx. 5 minutes to protect the video tape against excessive wear. 46 Repeat playback The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated. 1 Press REPEAT during VCR playback. 2 By pressing REPEAT each time, "REPEAT ON" or "REPEAT OFF" is selected in turn. REPEAT ON 3 When "REPEAT ON" is selected, the tape is played back to the end, and then it is automatically rewound to the starting point and played back again. The display "REPEAT ON" goes off in about 3 seconds. To cancel repeat playback: Press REPEAT to select "REPEAT OFF". Instant skip Press INSTANT SKIP during playback. The video is rapidly forwarded for approx. 30 seconds and playback resumes. You may press the button up to six times in a row to move 180 seconds ahead. Audio output selection When playing a pre-recorded Hi-Fi STEREO on video tape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a monaural audio program. Each time when you press the button, output selection display appears on the screen for several seconds. Refer to the chart below. OUTPUT SELECTION STEREO L ch R ch MONO SOUND HEARD ON BOTH SPEAKERS STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO To display VCR operation status Press DISPLAY. The clock, day of the week and more information will be indicated. DAY OF THE WEEK CLOCK HI-FI STEREO AUTO REPEAT 8 : 30AM MON HI-FI 00 : 15 : 12 SP OPERATING MODE TAPE IN TAPE SPEED REAL TIME COUNTER To cancel the display: Press DISPLAY until all indicators disappear. 2K70101A_E P44-51 46 08`02`07, 20:44