Toshiba DKT3210-SD User Guide - Page 32

The Basics Important - Read First Which Outgoing/Incoming Call Features Do I Have? Check mark here which outgoing/incoming features you have on your system. Automatic Line Selection (ALS): When making outgoing calls, you have ALS if when you lift the handset or press Spkr you hear dial tone and the Line Light Emitting Diode (LED) lights steady green. The LCD displays the station number and the seized outside line. Ringing Line Preference: You answer an incoming line ringing your station by lifting the handset or pressing Spkr. You do not have to press an extension button to answer. Tone First Signaling: Internal incoming call - you hear successive ring tones, then lift the handset or press Spkr to answer the call. Note Check with your System Administrator to see if you are set with Tone First Signaling. If you do, you can press 2 to change to Voice First signaling. Voice First Signaling: Internal incoming call - your telephone does not ring; instead you hear a long tone, then the caller's voice. Talk in the direction of your telephone, or answer the call as you normally would by lifting the handset or pressing Spkr. Note Check with your System Administrator to see if you have the ability to change between Tone and Voice Signaling on a call-by-call basis. If you do, you can press 1 after dialing an internal telephone number to change the signaling. Hot Dialing: If your telephone is programmed for "hot dialing," you do not have to press Spkr or lift the handset before dialing internal or external speakerphone calls. When you dial a number, the speakerphone automatically turns on and the Spkr and Mic LEDs light. 14 Strata CIX and CTX IPT/DKT Telephone 08/07