Toshiba DMF102XKU Owner's Manual - English - Page 6

6 ● Do not use volatile liquids, such as insect spray, near the digital media frame. Do not leave rubber or plastic products in contact with the digital media frame for a long time. They will leave marks on the finish. ● When the digital media frame is not in use, be sure to turn off the power. ● If you do not use the digital media frame for a long period, the unit may not function properly in the future. Turn on and use the digital media frame occasionally. NOTES ON LOCATING ● When you place this digital media frame near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the digital media frame away from the TV, radio, or VCR. NOTES ON CLEANING ● Use a soft, dry cloth for cleaning. Do not use any type of solvent, such as thinner and benzine, as they may damage the surface of the digital media frame. ● When cleaning the LCD screen, use a soft, dry cloth. NOTES ON MOISTURE CONDENSATION Moisture condensation damages the digital media frame. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the internal parts of the digital media frame. ● Moisture condensation occurs during the following cases. - When you transport the digital media frame directly from a cold place to a warm place. - When you use the digital media frame in a room where you just turned on the heater, or a place where the cold air from the air conditioner directly hits the unit. - In summer, when you use the digital media frame in a hot and humid place just after you move the unit from an air conditioned room. - When you use the digital media frame in a humid place. ● Do not use the digital media frame when moisture condensation may occur. If you use the digital media frame in such a situation, it may damage memory cards and internal parts. Remove the memory cards, connect the AC adaptor, turn on the digital media frame, and leave it for two or three hours. After two or three hours, the digital media frame will have warmed up and evaporated any moisture. ABOUT DATA ● The contents in the memory storage (internal memory, memory card, USB memory device) cannot be guaranteed regardless of the cause of damage or failure. ● Please note that data in the internal memory may be deleted when repairing or checking the Digital Media Frame. WIRELESS LAN INFORMATION Wireless Interoperability This product is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division Multiplexing(OFDM) radio technology, and is compliant to: ■ The IEEE 802.11 Standard on Wireless LANs (Revision B/G), as defined and approved by the Institute of Electrical and Electronics Engineers. ■ The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance. CAUTION Bluetooth® and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN.