Toshiba DVR620 Owner's Manual - English - Page 38
Note for one-touch timer recording - remote control
UPC - 022265002223
View all Toshiba DVR620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
BASIC RECORDING & ONE-TOUCH TIMER RECORDING 6 Press [REC I] to start recording. "I" will be displayed for 5 seconds. 7 Press [STOP C] to stop recording. The recorded title will be included in the title list. (Refer to "Guide to a Title List" on page 71.) e.g.) DVD+R/DVD-RW/-R I SP 1:53 Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording. To set one-touch timer recording (OTR)... This is a simple way to set the recording time in blocks of 30 minutes. Press [REC I] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen. One-touch timer recording will start. I 0:30 0:30 (normal recording) 1:00 8:00 7:30 • To change the recording length during one-touch timer recording, press [REC I] repeatedly until the desired length appears. • To cancel one-touch timer recording within the specified time, press [STOP C]. Wait for a moment 90% This operation may take awhile to be completed. Note • When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording. • When the unit clock has not been set, the space for a date and time of title names will be blank. • You cannot change the recording mode during the recording pause mode. Note for one-touch timer recording • The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen. • Unlike the timer recording, you can perform the following operations during one-touch timer recording. - Turning the unit into the standby mode (One-touch timer recording will be canceled.). - Using [REC I] or [STOP C] on the remote control. • You cannot use the pause function during one-touch timer recording. • If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode. • When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously. 38 EN E9PKAUD_DVR620KU_EN.indd 38 3/25/2009 3:47:49 PM