Toshiba DVR620 Owner's Manual - English - Page 40

TIMER RECORDING 3 Use [K / L] to enter the date, then press [B]. Date JAN/02 L1/L2 L1 Start - - : - REC To DVD End - - : - Mode SP SP 2 : 00 JAN/01 Daily MON-SAT MON-FRI SAT FRI When pressing [L] at the current date, the date will change as follows. e.g.) January 1st SUN JAN/31 4 Use [K / L / { / B] or [the Number buttons] to enter the start and end time, then press [B]. Refer to "Recording Mode" on page 34 for DVD or "Recording" on page 100 for VCR. • You can check the remaining recordable space of the disc when you select the recording mode. Date JAN/02 L1/L2 L1 Start 1 : 00AM REC To DVD End 2 : 00AM Mode SP SP 1 : 00 Auto recording mode select (DVD only)... When "Auto" is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program. Date JAN/02 L1/L2 L1 Start 1 : 00AM REC To DVD End 2 : 00AM Mode Auto Auto 1 : 00 • "Auto" is only available for one program in the timer program list. • The recording may be cut short, when the available recording space of the disc is too limited. Date JAN/02 L1/L2 L1 Start 1 : 00AM REC To DVD End - - : - Mode SP SP 2 : 00 • You cannot make a program whose recording time exceeds 12 hours. 5 Use [K / L] to select an appropriate external input (L1/L2) to which your external tuner is connected, then press [B]. 8 Press [ENTER] when all items are entered. After displaying an instructive message for 10 seconds, timer program list will appear. Press TIMER SET for Timer Standby mode. Ensure the external source is turned to the correct channel. When Timer set on DVD or VCR, it is not available in the standby mode. Press TIMER SET to cancel the Standby mode. Date JAN/02 L1/L2 L1 Start 1 : 00AM REC To DVD End 2 : 00AM Mode SP SP 1 : 00 6 Use [K / L] to select a recording media ("DVD" or "VCR"), then press [B]. Date JAN/02 L1/L2 L1 Start 1 : 00AM REC To DVD End 2 : 00AM Mode SP SP 1 : 00 7 Use [K / L] to select a recording mode. Date JAN/02 L1/L2 L1 Start 1 : 00AM REC To DVD End 2 : 00AM Mode SP SP 1 : 00 Timer Programming JAN/ 2/09 1:00 AM L1 SP SP (1:00) THU JAN/01 10:00AM Date Start End JAN/02 1:00AM 2:00AM L1/L2 L1 Your program setting is stored. • To set another program, repeat steps 2 to 7. • To exit, press [TIMER PROG.] or [SETUP]. • When 2 or more programs are overlapped, "Timer program overlapped" appears, and the overlapped program will be displayed in blue. To correct the timer program refer to "Checking, canceling, or correcting the timer programming information" on page 41. 9 Press [TIMER SET] to set a timer programming. will appear on the front panel display, while this unit waits to make the recording. CS DR CD HDD DVD "VCR" will appear on the front panel display if VCR timer recording have been set. 40 EN E9PKAUD_DVR620KU_EN.indd 40 3/25/2009 3:47:51 PM