Toshiba Portege R100 User Manual - Page 170
Changing the master and user passwords in System Setup
View all Toshiba Portege R100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
170 Toshiba Utilities Hard disk drive passwords 6 Press the spacebar, then type a password of 1 to 16 characters and press Enter. You may use any combination of letters and numbers in your password. 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered for both User and Master passwords. If the two passwords do not match, an error message appears. Repeat steps 6 and 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, Press Y. Changing the master and user passwords in System Setup To change the master and user passwords in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: "Check system, Then press [F1] key," press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Use the up and down arrow keys to select the password you wish to change. 5 Press the spacebar, then enter the appropriate password and press Enter. 6 If you want to change your password, input the new password.