Toshiba SD-V296 Owner's Manual - English - Page 8

Remote Control Installing the Batteries for the Remote Control Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. 1 2 3 Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • The maximum operable ranges from the unit are as follows. - Line of sight: approx. 23 feet (7m) - Either side of center: approx. 23 feet (7m) within 30° 23 feet (7m) 30˚ 23 feet (7m) 23 feet (7m) 30˚ Note: • Do not mix alkaline and manganese batteries. • Do not mix old and new batteries. • Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. • If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available. Be sure to use [OPEN/CLOSE A] or [ C/A (STOP/EJECT)] on the unit. Media Button (Alphabetical order) DVD mode VCR mode • To turn the unit on/off. • To turn the unit on/off. • To turn the unit on/off. 123 456 789 0 +10 A-B ANGLE AUDIO CLEAR/ C.RESET DISPLAY DVD ENTER INPUT SELECT MENU MODE OPEN/CLOSE PAUSE PLAY REC/OTR REPEAT RETURN SEARCH MODE SETUP • To select chapter or title directly. • To select track or file directly. • To search forward/backward through a disc. • To begin slow forward/reverse playback in the pause mode. • To repeat between your chosen point of A and B. • To search forward/backward through a disc. (CD) • To repeat between your chosen point of A and B. (CD) • To forward/backward a tape. • To begin slow forward playback in the pause mode. • To select camera angles on a • To rotate a picture 90 degrees disc. clockwise. (JPEG) • To select audio languages on a • To select "STEREO", "L-ch" or disc. "R-ch". (CD) • To clear the markers. • To clear numbers entered incorrectly. • To cancel the point A for A-B repeat setting. • To display the current disc mode. • To clear the markers. (CD) • To remove status number in program input. • To clear numbers entered incorrectly. • To cancel the point A for A-B repeat setting. (CD) • To display the current disc mode. • To select "HIFI" or "MONO" mode during playback. (Hi-Fi tapes only) • To exit the VCR menu. • To reset the tape counter. • To display the current time, tape counter, "DISC", "L1" or "L2". • To select DVD output mode. • To activate DVD mode. • To move the cursor and determine its position. • To call up the disc menu on a disc. • To set black level on/off. • To set virtual surround on/off. • To select the DVD output mode. • To activate DVD mode. • To move the cursor and determine its position. • To skip files. (JPEG) • To call up the file list. (JPEG) • To program the playing order or play randomly. • To set virtual surround on/off. (CD) • To activate the Slide Show mode. (JPEG) • To select an item on the VCR menu. • To advance to the next VCR menu. • To go back one step during clock and timer programming. • To select input "DISC", "L1"or "L2". • To open or close the disc tray. • To open or close the disc tray. • To eject the cassette tape from the cassette compartment. • To pause disc playback. • To advance playback one frame at a time. • To pause disc playback. • To pause tape playback or recording. • To advance playback one frame at a time. • To begin disc playback. • To begin disc playback. • To begin tape playback. • To start recording or one-touch timer recording (OTR). • To play back a chapter or title repeatedly. • To play back a track or disc repeatedly. (CD) • To play back a file, folder or disc repeatedly. (JPEG) • To select the repeat mode on/ off. • To return to the previous operation in menu. • To return to the previous operation in menu. • To search chapter, title or time. • To set or search the markers. • To search track. • To search time. (CD) • To set or search the markers. (CD) • To call up the index or time search menu. • To call up the DVD setup menu. • To call up the DVD setup menu. • To call up the VCR menu. SKIP • To skip chapters or titles. • To skip tracks or files. SPEED • To select the recording speed. STOP SUBTITLE T-SET • To stop playback. • To select subtitles on a disc. TOP MENU TRACKING TRACKING • To call up the top menu on a disc. VCR ZOOM • To magnify part of a picture. (2x/4x) • To stop playback. • To return to the top file of the highest hierarchy in the program and file list. (JPEG) • To magnify part of a picture. (2x) (JPEG) • To stop playback or recording. • To put the VCR into standby mode for a timer recording. • To adjust the tracking manually during playback. • To select the VCR output mode. • To activate VCR mode. - 8 - EN E8EB5UD_SD-V296KU_EN_ES_v1.indd 8 2008/07/14 10:36:31