Toshiba SD V394 Owner's Manual - English - Page 20

Connections Connecting to optional audio equipment You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment. Connection for video signal to your TV, see 18 19 . • This selection uses the following reference mark. : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Amplifier equipped with a Dolby Digital decoder Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. To COAXIAL type digital audio input 75 Ω coaxial cable (not supplied) • Use DVD video discs encoded via the Dolby Digital recording system. To COAXIAL DIGITAL AUDIO OUT Connecting to an amplifier equipped with Dolby Surround Pro Logic Dolby Surround Pro Logic You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set the amplifier so that you can enjoy Dolby Surround Pro Logic sound. With an amplifier not equipped with Dolby Digital Connect the equipment as follows. • This connection is only suitable for Video CDs and Audio CDs. * Amplifier equipped with Dolby Surround Pro Logic * Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. To audio input Audio cable (not supplied) To ANALOG AUDIO OUT Connecting to an amplifier equipped with a DTS decoder Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs. Amplifier equipped with a DTS decoder "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. • Use DVD video discs or audio CDs encoded via the To COAXIAL type digital audio input 75 Ω coaxial cable (not supplied) DTS recording system. To COAXIAL DIGITAL AUDIO OUT 20 2I30101B-En_p18-25 20 1/12/06, 17:04