Toshiba SD V394 Owner's Manual - English - Page 24

Basic setup (VCR) Clock setting The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. Once received, it will take approximately 4 minutes for the clock to set itself automatically. POWER VCR DVD VCR MENU ENTER SET +/- CALL AUTO CLOCK setting To set AUTO CLOCK to off Preparation: • Turn ON the TV and select the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) 1 Connect the Antenna or Cable system. • If you use a cable box, turn it on. 2 Plug the AC power cord to the AC outlet. 3 Make sure the DVD/VCR is turned off. • If you press POWER, the Auto Clock set is not programmed. 4 Wait at least three minutes and press POWER. When shipped from factory the AUTO CLOCK is set to "ON". But if you do not want AUTO CLOCK setting, it can be turned off: 1 Press VCR MENU. TSCSAIAYUHMMPSTESTOEREENRTMRUUEESPPCEETASUTEPT OONN OOFFFF +/Ð/ENTER/MENU 2 Press SET + or - to select "SYSTEM SETUP", then press ENTER. TSCSAIAYUHMMPSTESTOEREENRTMRUUEESPPCEETASUTEPT OONN OOFFFF +/Ð/ENTER/MENU 5 Press CALL to check the clock setting on the on screen display. 8 : 47AM MON STEREO SAP CH 125 00 : 00 : 00 SP 6 If the clock is not set, check the antenna condition. The AUTO CLOCK may not function properly if the reception condition is not good. AUTO CLOCK adjustment The auto clock adjustment will be updated at 6:00 AM, 12:00 PM and 6:00 PM everyday when the DVD/VCR turned off. • If you use a cable box and you want AUTO CLOCK adjustment to be performed, the cable box must be left on. • The AUTO CLOCK adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time. 24 3 Press SET + or - to select "AUTO CLOCK". SYSTEM SETUP CLOCK SET LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND ON OFF AUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME +/Ð/ENTER/MENU 4 Press ENTER to select "OFF". SYSTEM SETUP CLOCK SET LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND ON OFF AUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME +/Ð/ENTER/MENU 5 Press VCR MENU repeatedly to return to the normal screen. • When the AUTO CLOCK is set to "OFF", the AUTO CLOCK adjustment does not function. You must set the clock manually 26 . 2I30101B-En_p18-25 24 1/12/06, 17:05